Some insights in novel risk modeling of liquefied natural gas carrier maintenance operations

This study discusses the analysis of various modeling approaches and maintenance techniques applicable to the Liquefied Natural Gas (LNG) carrier operations in the maritime environment. Various novel modeling techniques are discussed; including genetic algorithms, fuzzy logic and evidential reasoning. We also identify the usefulness of these algorithms in the LNG carrier industry in the areas of risk assessment and maintenance modeling.     

Enabling a viable technique for the optimization of LNG carrier cargo operations

In this study, we optimize the loading and discharging operations of the Liquefied Natural Gas (LNG) carrier. First, we identify the required precautions for LNG carrier cargo operations. Next, we prioritize these precautions using the analytic hierarchy process (AHP) and experts’ judgments, in order to optimize the operational loading and discharging exercises of the LNG carrier, prevent system failure and human error, and reduce the risk of marine accidents. Thus, the objective of our study is to increase the level of safety during cargo operations.     

Visualisation of uncertainty in probabilistic traffic models for policy and operations

This study investigates different methods to visualise uncertainty in static representations of probabilistic traffic models predictions on road-networks. Although various graphical cues may be used to represent uncertainty it is not a priori clear which of them are most suited for this purpose, since their legibility, intelligibility and the degree to which they interfere with other graphical elements in a representation differ widely. Several graphical uncertainty representations were therefore developed and analysed in expert sessions. A selection of the initial set of uncertainty visualisations was further evaluated in a cognitive alternative task-switching experiment. The results show that graphical representations are able to convey uncertainty information relatively accurately, while some uncertainty visualisations outperform others. It depends on the model and scenario which representation is most suited for a given application. This paper presents an overview of possible graphic uncertainty representations and the considerations involved when applying them to uncertainty in traffic model visualisations.     

Impacts of urban built environment on empty taxi trips using limited geolocation data

This study identifies the determinants of the empty taxi trip duration (ETTD) by combining three high-resolution databases—geolocation data in New York City, geodatabase of urban planning data, and transportation facilities data. Considering the nature of duration data, hazard-based duration model is proposed to explore the relationships between causal factors and ETTD, coupling with three variations of baseline hazard distribution, i.e., Weibull distribution with heterogeneity, Weibull distribution, and log-logistic. Furthermore, the likelihood ratio test is presented to implement comparisons of three baseline hazard distributions, as well as spatial and temporal transferability of causal factors. The results show significant complementary effects by subway system and competitive effects by city bus and bicycling system, as well as significant impacts of trip length, airport trip, average annual income, and employment rate. Urban built environment, for instance, density of road, public facilities, and recreational sites and ratio of green space, has various impacts on ETTD. The elasticity estimations confirm significant spatial and temporal heterogeneity in impacts on ETTD. In addition, the analysis on elasticity also reveals the considerable impacts of severe traffic congestion on ETTD within Manhattan. The modeling can assist stakeholders in understanding empty taxi movements and measuring taxi system efficiency in urban areas.     

Effect of nozzle orifice diameter on diesel spray tip penetration according to various spray models for CFD simulation with widely varying back pressure

CFD simulations of spray tip penetration with the standard KIVA3V, ‘original gas jet’ and ‘Normal gas jet profile with breakup length formula’ (NGJBL) spray models were performed to investigate the effects of nozzle orifice size and ambient gas density combinations on the spray penetration. The accuracy of the CFD simulation results was estimated by comparing them with available experimental data. The ambient gas density was varied in 12 kg/m³ intervals from 12 to 69 kg/m³ for each nozzle orifice diameter. The nozzle orifice diameters used were 119, 140, 183 and 206 mm. A total of 20 cases in the CFD simulations were considered with combinations of the 4 nozzle orifice diameters and 5 ambient gas densities. CFD simulations with the NGJBL spray model were more accurate than those with either the standard KIVA3V or gas jet spray models as the nozzle orifice diameter and ambient gas density was increased. The NGJBL and original gas jet model is more effective in predicting the spray tip penetration near the nozzle tip region.     

Vibration reduction of H/Shaft using an electromagnetic damper with mode change

The objective of this study is to develop a damper that can reduce the amplitude of vibration in various frequency ranges. Previous H/Shaft vibration reduction methods work in a passive way. A dynamic damper reduces the amplitude of vibration at its first mode, but vibration still appears at the second mode. A mass damper or hollow shaft can shift the natural frequency to a lower or higher region. The fixed operating frequency prevents vibration from being reduced outside the operating frequency range. The proposed damper uses electromagnets as either masses or actuators to change the damper mode between dynamic damper mode and mass damper mode. The electromagnetic damper (EMD) can change its mode to respond to the vibration excitation at both low and high frequencies. The vibration reduction performance was evaluated by FRF tests in laboratory and vehicle conditions. The results were compared with those of a dynamic damper and indicate that the amplitude of vibration is reduced by 95.6 % when the EMD is implemented on an H/Shaft, whereas only 61.9 % vibration reduction is achieved by the dynamic damper.     

基于安全和情感化的汽车辅助驾驶系统多模态交互设计研究综述

汽车作为目前人类最常使用的交通工具之一,其智能驾驶技术大部分处在L2～L3“人机共驾”技术的发展阶段,在L5级自动驾驶技术出现之前,“人机共驾”仍然是目前主流的驾驶方式,其各种车载系统和交互方式正在不断完善。多模态交互作为未来设计的发展趋势,必然将与汽车融合产生新的“火花”。对车载系统中多模态交互设计研究包括疲劳状态预警、碰撞预警、车道偏离预警、智能接管提醒、智能泊车等方向进行梳理总结,对车载AI多模态交互设计包括多屏交互、触控交互、手势交互、语音交互、表情交互、眼动交互等自然交互方式进行分析。采用文献研究及案例分析的方式探究如何在基于安全和情感化的背景下使驾驶员的体验更加舒适,展望了汽车多模态交互设计在车载系统中的应用及未来趋势。恰当而良好的交互方式融合将会提高各种车载系统及应用的安全性和驾驶的舒适度。多模态交互的引入必将是汽车发展的趋势。     

CFD Analysis of Ship-to-Ship Hydrodynamic Interaction

A numerical study of ship-to-ship interaction forces is performed using a commercial CFD code, and the results are compared with experimental data and with the results of a panel method analysis. Two ship models have been used in the interaction forces analysis: a tug and a tanker, advancing parallel to each other with different lateral distances and two different values of the fluid depth. Computations are carried out with four different flow models: inviscid and viscous flow with the free surface modeled as a rigid wall and inviscid and viscous flow with the deformable free surface. A fair agreement was obtained with available experimental data and results obtained by panel method. The influence of viscosity in the computations is found to be comparatively weak, while the wavemaking effects may be important, at small magnitude of the horizontal clearance.     

Are we ready to embrace connected and self-driving vehicles? A case study of Texans

While connected, highly automated, and autonomous vehicles (CAVs) will eventually hit the roads, their success and market penetration rates depend largely on public opinions regarding benefits, concerns, and adoption of these technologies. Additionally, the introduction of these technologies is accompanied by uncertainties in their effects on the carsharing market and land use patterns, and raises the need for tolling policies to appease the travel demand induced due to the increased convenience. To these ends, this study surveyed 1088 respondents across Texas to understand their opinions about smart vehicle technologies and related decisions. The key summary statistics indicate that Texans are willing to pay (WTP) $2910, $4607, $7589, and $127 for Level 2, Level 3, and Level 4 automation and connectivity, respectively, on average. Moreover, affordability and equipment failure are Texans’ top two concerns regarding AVs. This study also estimates interval regression and ordered probit models to understand the multivariate correlation between explanatory variables, such as demographics, built-environment attributes, travel patterns, and crash histories, and response variables, including willingness to pay for CAV technologies, adoption rates of shared AVs at different pricing points, home location shift decisions, adoption timing of automation technologies, and opinions about various tolling policies. The practically significant relationships indicate that more experienced licensed drivers and older people associate lower WTP values with all new vehicle technologies. Such parameter estimates help not only in forecasting long-term adoption of CAV technologies, but also help transportation planners in understanding the characteristics of regions with high or low future-year CAV adoption levels, and subsequently, develop smart strategies in respective regions.     

How household transportation expenditures have evolved in Canada: a long term perspective

In recent years, increasing recognition of the challenges associated with global climate change and inequity in developed countries have revived researcher’s interest towards analyzing transportation related expenditure of households. The current research contributes to travel behaviour literature by developing an econometric model of household budgetary allocations with a particular focus on transportation expenditure. Towards this end, we employ the public-use micro-data extracted from the Survey of Household Spending (SHS) for the years 1997–2009. The proposed econometric modeling approach is built on the multiple discrete continuous extreme value model (MDCEV) framework. Specifically, in our analysis, the scaled version of the MDCEV model outperformed its other counterparts. Broadly, the model results indicated that a host of household socio-economic and demographic attributes along with the residential location characteristics affect the apportioning of income to various expenditure categories and savings. We also observed a relatively stable transportation spending behaviour over time. Additionally, a policy analysis exercise is conducted where we observed that with increase in health expenses and reduction in savings results in adjustments in all expenditure categories.