“钻石型”观光会务船空调系统设计

本船航行于珠江沙角水域以内河面，按中国船级社2002年版《钢质内河船舶人级与建规范》及其修改通报对“B”级第四类客船要求进行设计。     

船员综合素质的培养与船舶安全

从船员综合素质的内涵入手,结合海事案例,分析了船舶安全与船员综合素质的内在关系,阐述了船舶安全对船员综合素质的具体要求,并对如何培养提高船员综合素质,确保船舶安全提出了一些建议。     

商业 MIS的开发及应用

详细地分析了大中型批发商业业务的特征、内部业务处理过程。在此基础上，建立了主要业务数据模型。在Client／Server结构下，服务器端选用NT和OracleWebServer，数据库采用Oracle7．3，客户端用PowetlBuildei6．5等开发工具设计实现。为大中型批发商业快速实现MIS建设提供了原形。     

基于Ansys的矩形加筋平盖封头强度评定

将有限元方法与分析设计相结合,利用有限元分析软件Ansys对一种矩形加筋平盖封头进行强度评定。本文首先介绍瓶盖封头结构的改进。然后建立有限元模型,并进行应力求解。结果表明,此加筋平盖封头满足强度要求,与普通平盖封头相比,减小了平盖的厚度,降低了结构总重量,对平盖封头的结构改进设计具有一定指导作用。     

A proposed vision and vehicle-to-infrastructure communication-based vehicle positioning approach

It is essential to obtain accurate location of vehicles for new applications of Intelligent Transportation Systems. To remedy the defects of present Global Positioning System and vehicle-to-infrastructure (V-I) positioning technology, a new positioning approach based on vision and V-I communication is proposed. This approach aims at lane-level positioning with lower cost than conventional ones. In this approach, the position of the vehicle is represented by its lateral position (the lane number) and longitudinal position (the distance from entrance of the road) in a course coordinate system along the road; the specific lane the vehicle is occupying (the lane number) can be judged using the information of lane lines detected by vision systems; then the distance to the vehicle is obtained by a Road Side Unit (RSU) during the V-I communication; and the longitudinal position is calculated. The error of the approach on typical operating conditions is analyzed, indicating that the new approach can achieve the accuracy of less than 0.31 m for straight road and 0.58 m for typical arc road with ultra-wideband communication and ranging technologies and rational arrangement of RSUs. The feasibility of this approach is presented.     

行人微观仿真中的运动模型与行为模型——STEPS与NOMAD模型对比

为了解各类行人仿真模型的性能差异和适用范围,以选取适当模型进行交通枢纽行人仿真,对两种典型行人仿真模型进行研究。依据模型对行人行为描述的复杂程度,将行人仿真模型分为运动模型、部分行为模型、行为模型3类,并分别介绍了各自的特点。选取典型的运动模型软件STEPS和行为模型软件NOMAD,详细探讨其采用的数学模型,并通过4个仿真实例对比分析这两种模型的特点。分析结果得出两种模型在宏观与微观层面的异同点以及存在的问题。     

Identity-based broadcast encryption with shorter transmissions

This paper describes two identity-based broadcast encryption(IBBE) schemes for mobile ad hoc networks.The first scheme proposed achieves sub-linear size cipertexts and the second scheme achieves O(1)-size ciphertexts.Furthermore, when the public keys are transmitted, the two schemes have short transmissions and achieve O(1) user storage cost, which are important for a mobile ad hoc network.Finally, the proposed schemes are provable security under the decision generalized bilinear Di?-Hellman(GBDH) assumption in the random oracles model.     

刀豆蛋白A条件化培养基对体外培养的兔角膜内皮细胞生长的影响

目的研究刀豆蛋白A(concanavalin A,ConA)条件化培养基对体外培养的兔角膜内皮细胞(rabbit corneal endothelial cells,RCECs)生长的影响。方法采用揭取后弹力层及内皮细胞联合组织块法进行RCECs的体外原代培养,分别用含有体积分数为5%、10%、15%、20%ConA的活化大鼠脾细胞条件上清液的RPMI1640培养基进行RCECs原代培养,并用含10%(体积分数)胎牛血清(fetal bovine serum,FBS)的RPMI1640培养基作为对照。神经烯醇化酶免疫组织化学染色法进行细胞鉴定;噻唑蓝比色法观察各组RCECs生长的状况;SPSS11.0One-way ANOVA及LSD检验进行统计分析。结果成功进行了RCECs的体外培养,培养细胞内神经烯醇化酶阳性表达。ConA条件化培养基各组细胞增殖均高于对照组(P<0.001),且10%、15%ConA条件化培养基组的RCECs细胞数量明显高于其他各实验组(P<0.001)。结论ConA条件化培养基具有促进RCECs生长的作用,可作为培养辅佐剂。     

正常绒毛和葡萄胎中Mel-CAM标记中间型滋养细胞的增殖情况

目的探讨葡萄胎中Mel-CAM与滋养细胞黏附、浸润之间的关系以及Mel-CAM标记中间型滋养细胞(IT)的增殖情况。方法采用双重免疫组化法,检测Mel-CAM标记IT的Ki-67表达情况。结果葡萄胎中Mel-CAM表达较正常绒毛明显增高,差异有统计学意义(P<0.05);葡萄胎绒毛表面有Mel-CAM标记IT出现,而正常绒毛表面则无;葡萄胎组织中IT的Ki-67指数较正常绒毛明显增高,差异有统计学意义(P<0.05)。结论葡萄胎绒毛表面有Mel-CAM表达,表现出双重分化方向,这可能与葡萄胎的发病机制有关;检测葡萄胎组织中IT的Ki-67指数对于预测葡萄胎的转归有潜在的价值。     

某商用车散热器面罩开裂分析与改进

为解决散热器面罩开裂问题,提出了焊点优化方案和散热器面罩加强板外置/加强板内置方案,并进行了模块化设计,制定了2组改进措施。有限元分析结果表明:2种改进措施与原状态相比,均有良好应力改善效果,满足应力要求。