Effect of intake valve swirl on fuel-gas mixing and subsequent combustion in a CAI engine

A fully three-dimensional model was used to investigate the optimal value for intake valve lift in a CAI engine. Uniform mixing in the engine is a key parameter that affects the auto-ignition reliability and thermal efficiency. The method of intake of the air supply often determines the uniformity (or quality) of the fuel-air mixture. In this paper, four strategies were applied for controlling the swirl intensity of intake air. The variation of the intake valve lift induces different swirling and tumbling intensities. Both experimental data and 1D WAVE software (Ricardo, Co.) were coupled with the 3D model to provide pressure and temperature boundary conditions. The initial condition of the EGR mass fraction was also provided by the 1D model. The benchmark scenario (Case 1) was considered as a valve lift with 2 mm for all intake valves. We found that an intake valve lift of 6 mm with the other intake valve closed (i.e., Case 5) yielded the largest swirling (helical motion in the axial direction) and tumbling, which in turn rendered optimal fuel-gas mixing. We also found that fuel distribution affected the auto-ignition sites (or spot). The better the mixing, the greater the gas temperature and combustion efficiency achieved, as seen in Case 5. The NOx level, however, was increased due to the gas temperature. The optimal operating condition is selected from the viewpoints of environmental protection and combustion efficiency.     

Type synthesis of function-generating mechanisms for seat suspensions

Mechanisms with “negative” stiffness are a unique tool used to significantly improve vibration isolation for a vehicle driver via upgrade of the seat suspension. However, connection of such mechanisms to the suspension results in errors in the function generation process, and in most cases, makes motion impossible. An approach to type synthesis is presented in order to make this process more predictable, easy and thus more practical for the upgrade process. Structural classification of the suspensions is presented, and -an atlas of function-generating mechanisms for suspensions that reveals the effect of “negative” stiffness is completed. All of the function-generating mechanisms appear in the atlas as result of enumeration. Structural properties of novel and existing mechanisms are compared. Finally, some advantages in practical use of novel suspensions with “negative” stiffness are illustrated.     

When strike comes to town… anticipated and actual behavioural reactions to a one-day,pre-announced,complete rail strike in the Netherlands

We conducted secondary analysis on data collected among rail users, days before and after a national rail strike in the Netherlands. Our aim was to compare anticipated and actual behavioural reactions to the rail strike, investigate associations with traveller and trip characteristics, and perceived behavioural control and satisfaction with the chosen alternative. Forty-four percent of the people who had anticipated to travel by train on the day of the strike abandoned their trip, 24% switched to car as driver, 14% switched to another mode (as passenger), 18% stayed with the train and rescheduled the planned activity to another day. Almost half of people who had anticipated travelling by car expected to change behaviour as well. Multinomial logistic regression showed low preference for car among rail users. Considerable marginal effects were found for several variables, e.g.: young people and females were less likely to switch to car; short and middle distance trips were less likely abandoned or switched to another day; commute and business trips were more likely done by car, and business trips less likely cancelled. Despite high levels of perceived behavioural control and satisfaction with the chosen alternative, permanent modal shift as result of this strike is not expected.     

Ranking of factors contributing to higher performance in the ocean transportation industry: a multi-attribute utility theory approach

Ocean transportation has been mainly studied from an economic and strategic point of view. This paper adopts an operations management approach aiming at the identification of the value-adding attributes that characterize the ocean transportation industry. This is achieved by using Johansson et al.'s 1 four value metrics—service, quality, cost, time—which are used for the identification of the contribution that different factors make to the total created value. In this paper, multi-attribute utility theory (MAUT) has been used to measure and compare the value of different processes of various sectors of the ocean transportation industry. The application of MAUT methodology is illustrated with an example from the four sectors of the industry: liner, dry bulk, liquid bulk and specialized. Results suggest that there is strong emphasis placed by ocean transportation companies on quality and that there is differentiating importance put on service and cost by different sectors. Time is seen as the lowest value contributor by all four sectors of the surveyed companies.     

Do observations adequately resolve the natural variability of oceanic turbulence?

Especially in high Reynolds number, naturally-occurring flows, turbulence is a highly variable process. It is challenging to measure yet it is vital that we do so in order to quantify the internal transports of mass, nutrients, energy and momentum. Isolated turbulence profiles are difficult to interpret; systematic sampling and subsequent averaging are necessary. Confidence in our ability to properly sample turbulence arises from intergroup comparisons, comparisons with other methods to assess mixing coefficients and, most fundamentally, the constraints imposed by the governing fluid dynamics on both energy losses via viscous dissipation caused by turbulence and on the mixing that results from turbulence. Several examples in which fluid processes have been isolated from the full range of oceanic motions are reviewed in this light. These examples show how observationally-derived estimates of turbulence dissipation or mixing are consistent with larger scale constraints. The larger oceanographic problem of defining the full geographic variability of mixing remains.     

Recent sedimentary study of the shelf of the Basque country

The Northern Iberian margin of the Spanish Basque country (provinces of Gipuzkoa and Viscaia) is characterized by a narrow continental platform, which receives inputs of riverine particulate matter from the numerous riverine systems located within the Basque country. This particulate matter is subsequently deposited within the Bay of Biscay, and Gouf de Capbreton [Frouin, R., Fiuza, A.F.G., Ambar, I., Boyd, T.J., 1990. Observations of a poleward surface current off the coasts of Portugal and Spain during winter. Journal of Geophysical Research 95 (C1), 679–691]. The main goal of this study is to establish a map of the surface sediment distribution of the Basque continental shelf and more specifically to map the muddy patch located at the eastern side of that continental shelf.Three oceanographic cruises were conducted in 2003 and 2004. From these campaigns 340 surface samples, 12 short cores and 3 gravity cores have been collected over the mid and outer shelf from depths ranging between 50 m and 150 m deep. 3 seismic profiles were obtained across the shelf mud patch using a Sparker device.Sediment grain-size analyses were performed by the classical physical method of sieving and use of settling columns. The POC (Particular Organic Carbon) amounts in sediment and water samples were determined using the Strickland and Parsons' method [Strickland, J.D.H., Parsons, T.R., 1972. Determination of particulate carbon. In : A practical handbook of seawater analysis. Fisheries ResearchBoard of Canada, Ottawa, pp. 207−211] as adapted by Etcheber [Etcheber, H., 1981. Comparaison des diverses méthodes d'évaluation des teneurs en matières en suspension et en carbone organique particulaire des eaux marines du plateau continental aquitain. Journal de Recherche Océanographique VI (2), 37−42]. Radioisotopic measurements (²¹⁰Pb_exc) were made using a semi-planar germanium detector coupled to a multichannel analyser. Radiographical analysis was performed with an X-ray equipment (SCOPIX®) coupled with a radioscopy instrumentation and processing unit.Firstly, a detailed sedimentological map of this shelf has been produced and secondly, geophysical surveys have precisely mapped the geometry of the main mud patch on the continental shelf. In the mud patch itself the rates of sedimentation are between 0.13 and 0.50 cm yr^− 1. The maximum rate of sedimentation is located in the central mud patch, whereas the minimum rate of deposition occurs close to the rocky outcrops. These results seem to be in agreement with the estimation of the total thickness of the mud patch revealed by seismic profiles. The central part corresponds to the maximum thickness of 7 m.Interpretations of the associated oceanic current forcing factors (current direction, wave fetch and wind directional modes) relating to the identified sediment depositional zones are also undertaken.     

Advanced Control Methods of Active Suspension

This paper describes new control methods for the active suspension. For improving ride comfort further, preview control rule is proposed. For improving stability further, roll stiffness distribution control rule is examined by the test vehicle. Simulations and vehicle driving tests are conducted to confirm the effect of these new control methods. The results of simulations and vehicle driving tests show in our research phase that preview control can achieve a substantial improvement in ride comfort and application of roll stiffness distribution control provides a large improvement in stability     

An analysis of bicycle route choice preferences in Texas,US

In the US, the rise in motorized vehicle travel has contributed to serious societal, environmental, economic, and public health problems. These problems have increased the interest in encouraging non-motorized modes of travel (walking and bicycling). The current study contributes toward this objective by identifying and evaluating the importance of attributes influencing bicyclists’ route choice preferences. Specifically, the paper examines a comprehensive set of attributes that influence bicycle route choice, including: (1) bicyclists’ characteristics, (2) on-street parking, (3) bicycle facility type and amenities, (4) roadway physical characteristics, (5) roadway functional characteristics, and (6) roadway operational characteristics. The data used in the analysis is drawn from a web-based stated preference survey of Texas bicyclists. The results of the study emphasize the importance of a comprehensive evaluation of both route-related attributes and bicyclists’ demographics in bicycle route choice decisions. The empirical results indicate that travel time (for commuters) and motorized traffic volume are the most important attributes in bicycle route choice. Other route attributes with a high impact include number of stop signs, red light, and cross-streets, speed limits, on-street parking characteristics, and whether there exists a continuous bicycle facility on the route.

Do Road Planners Produce More ‘Honest Numbers’ than Rail Planners? An Analysis of Accuracy in Road‐traffic Forecasts in Cities versus Peripheral Regions

Abstract

Based on a review of available data from a database on large‐scale transport infrastructure projects, this paper investigates the hypothesis that traffic forecasts for road links in Europe are geographically biased with underestimated traffic volumes in metropolitan areas and overestimated traffic volumes in remote regions. The present data do not support this hypothesis. Since previous studies have shown a strong tendency to overestimated forecasts of the number of passengers on new rail projects, it could be speculated that road planners are more skilful and/or honest than rail planners. However, during the period when the investigated projects were planned (up to the late 1980s), there were hardly any strong incentives for road planners to make biased forecasts in order to place their projects in a more flattering light. Future research might uncover whether the change from the ‘predict and provide’ paradigm to ‘predict and prevent’ occurring in some European countries in the 1990s has influenced the accuracy of road traffic forecasts in metropolitan areas.