Safety of child passengers who ride to school on a motorcycle: An observational study in two Argentine cities

In low- and middle-income countries, the motorcycle has increasingly become a means of family transportation due to its low cost and the poor quality of public transportation. Consequently, many child motorcycle passengers are at an elevated risk of serious injury in the event of a traffic crash. The available research on child safety devices is scarce and focused mainly on helmet use, while other devices (e.g. high-visibility clothing) have received little attention. This observational study documented the safety conditions and related factors of primary schoolchildren who rode to school as motorcycle passengers in two cities of Argentina.Data was obtained in the vicinity of 27 public primary schools in two cities of Argentina (one mid-sized city and the other a small city by the country's standards) between May 2018 and September 2019. A total of 1440 motorcycle occupants (656 drivers and 784 child passengers) were observed.The use of an adequate helmet was lower among children (vs. drivers). Most of the children were unable to reach the motorcycle's footrests, did not use high-visibility clothing or a fastening device, carried a backpack, and mounted and dismounted the motorcycle in an unsafe place. Some children rode in front of the driver or in a motorcycle with three or four occupants. Use of helmet by drivers and driver sex (woman) were related with an increase in safety in children. The indicators were worse in the larger city.The results revealed a low level of adoption of safety measures in children as well as in adults in both cities. This suggests that motorcycle travel is unsafe. Greater effort is needed to improve motorcycle safety, especially for children. It is important to debate regulatory details such as a minimum age for passengers, a limit on the number of passengers, and other safety criteria. It is also important to conduct educational campaigns that include the distribution of safety devices.     

Scheduling short-term marine transport of bulk products

A multinational company uses a personal computer to schedule a fleet of coastal tankers and barges transporting liquid bulk products among plants, distribution centres (tank farms), and industrial customers. A simple spreadsheet interface cloaks a sophisticated optimization-based decision support system and makes this system useable via a varity of natural languages. The dispatchers, whose native language is not English, and some of whom presumably speak no English at all, communicate via the spreadsheet, and view recommended schedules displayed in Gantt charts both internationally familiar tools. Inside the spreadsheet, a highly detailed simulation can generate every feasible alternate vessel employment schedule, and an integer linear set partitioning model selects one schedule for each vessel so that all loads and deliveries are completed at minimal cost while satisfying all operational requirements. The optimized fleet employment schedule is displyed graphically with hourly time resolution over a planning horizon of 2-3 weeks. Each vessel will customarily make several voyages and many port calls to load and unload products during this time.     

Optimal tolls for multi-class traffic: Analytical formulations and policy implications

This paper puts together an analytical formulation to compute optimal tolls for multi-class traffic. The formulation is comprised of two major modules. The first one is an optimization component aimed at computing optimal tolls assuming a Stackelberg game in which the toll agency sets the tolls, and the equilibrating traffic plays the role of the followers. The optimization component is supported by a set of cost models that estimate the externalities as a function of a multivariate vector of traffic flows. These models were estimated using Taylor series expansions of the output obtained from traffic simulations of a hypothetical test case. Of importance to the paper is the total travel time function estimated using this approach that expresses total travel time as a multivariate function of the traffic volumes. The formulation presented in the paper is then applied to a variety of scenarios to gain insight into the optimality of current toll policies. The optimal tolls are computed for two different cases: independent tolls, and tolls proportional to passenger car equivalencies (PCE).The numerical results clearly show that setting tolls proportional to PCEs leads to lower values of welfare that are on average 15% lower than when using independent tolls, though, in some cases the total welfare could be up to 33% lower. This is a consequence of two factors. First, the case of independent tolls has more degrees of freedom than the case of tolls proportional to PCEs. Second, tolls proportional to PCEs do not account for externalities other than congestion, which is likely to lead to lower welfare values.The analytical formulations and numerical results indicate that, because the total travel time is a non-linear function of the traffic volumes, the marginal social costs and thus the optimal congestion tolls also depend on the traffic volumes for each vehicle class. As a result of this, for the relatively low volumes of truck traffic observed in real life, the optimal congestion tolls for trucks could indeed be either lower or about the same as for passenger cars. This stand in sharp contrast with what is implied in the use of PCEs, i.e., that the contribution to congestion are constant. This latter assumption leads to optimal truck congestion tolls that are always proportional to the PCE values.The comparison of the toll ratios (truck tolls divided by passenger car tolls) for both observed and optimal conditions suggests that the tolls for small trucks are about the right level, maybe a slightly lower than optimal. However, the analysis of the toll ratio for large trucks seems to indicate a significant overcharge. The estimates show that the average observed toll ratio for large trucks is even higher than the maximum optimal toll ratio found in the numerical experiments. This suggests that the tolls for large trucks are set on the basis of revenue generation principles while the passenger car tolls are being set based on a mild form of welfare maximization. This leads to a suboptimal cross-subsidization of passenger car traffic in detriment of an important sector of the economy.     

Combustion development of a Bi-Fuel engine

Environmental improvement and energy issues are increasingly becoming more important as worldwide concerns. Natural gas is a good alternative fuel that can help to improve these issues because of its large quantity and clean burning characteristics. This paper provides the experimental performance results of a Bi-Fuel engine that uses Compressed Natural Gas as its Primary fuel and gasoline as its secondary fuel. This engine is a modification of the basic 1.4-liter gasoline engine. Generally, on the unmodified base engine, torque and power for CNG fuel are considerably lower than gasoline fuel. In this paper, the influence of fuels on wall temperature, performance and emissions are investigated.     

The external cost of speed at sea: An analysis based on selected short sea shipping routes

According to the mid-term review of the EU White Paper on Transport, Short Sea Shipping (SSS) is expected to grow at a rate of 59% (metric tonnes) between 2000 and 2020. If we consider that the overall expected increase in both freight exchanges and volume is 50%, sea transport is one of the most feasible alternatives to reduce traffic congestion on European roads. Maritime transportation may compete with road transport as far as certain traffics are concerned, but only when assuming external costs. This paper analyzes several intermodal transport chains involving a sea leg by comparing the effect of pollutant emissions from different ship types and road transport in terms of potential external cost savings. The translation of these emissions into environmental costs shows, for certain conditions, savings in the case of sea transport that would justify the use of an environmental bonus to promote the sea option.     

应用局域波对声发射信号监测提取

介绍了局域波的基本原理,分析了声发射信号的特点和声发射信号检测系统,提出了局域波分解特征量提取技术。通过在钢管裂纹声发射的一个实际信号中的应用,验证了局域波特征量提取的有效性。     

双通线加热的热力学及实验分析(英文)

The present investigation deals with process analysis of oxy-acetylene flame assisted double pass line heating for varying plate thickness. oxy-acetylene flame as the heat source for multi pass line heating to achieve 3-D bending of plates with varying thicknesses was studied. The oxy-acetylene flame was modeled as the moving heat source in the FEM analysis. The transient thermal histories were predicted taking into account the temperature dependent thermo-mechanical properties. A comparative study between single pass and double pass line heating residual deformation was also carried out. The temperature distribution and residual deformations predicted by the numerical model developed in the present work compared fairly well with those of the experimental ones.     

Gantry crane operations to transfer containers between trains: A simulation study of a Spanish terminal

Freight transfer operations are critical in combined transport networks. In this paper a simulation model and modelling approach to the transfer of cargo between trains at rail terminals is presented. The model is used to study the Port-Bou terminal, the main intermodal terminal at the Spanish-French frontier. Four different gantry crane operation modes to interchange containers between trains are evaluated. These operation rules are tested in several scenarios to examine the critical factors of the system and the best operation rule for each situation. Latest generation software is used to develop the model that incorporates modular programming and enhanced graphic systems for output representation. It allows a dynamic display of the simulated system and, likewise, the possibility of developing modules that can be reused in other studies. The research shows how simulation can be a useful planning tool in the rail transportation context.     

CO2 air–sea disequilibrium and preformed alkalinity in the Pacific and Indian oceans calculated from subsurface layer data

This work estimates new regionalized empirical parameterizations for preformed alkalinity (A_T^o) and the CO₂ air–sea disequilibrium (?C_dis). Both are key terms for the computation of anthropogenic CO₂ in the back-calculation methods. Data from the subsurface layer (75–180 m depth range) covering an area from North to South and from 19°E to 67.5°W (Pacific and Indian oceans) were taken from GLODAP (The Global Ocean Data Analysis Project) database. The subsurface layer is proved as a reliable reference for representing the main characteristics of the different water masses of the oceans. Besides, handing data from the two ocean basins altogether makes the new parameterizations of A_T^o and ?C_dis to be more globally consistent. Nevertheless, each ocean basin, at least in some regions, has different oceanographic characteristics based on its proper dynamical processes and water masses formation. In order to maintain each ocean basin ‘identity’ the whole domain was divided in six different regions (two of them sharing waters from Pacific and Indian oceans) and parameterizations in each region for both terms were obtained. Previously, data were transformed into a grid of 4°lat. × 5°lon. and the results obtained from the parameterizations were visualized and compare with pCO₂ climatologies. From the comparisons with previous ?C_dis estimations good results are obtained showing the reliability and robustness of the new regionalized empiric parameterizations.