Method for analyzing epicyclic gearboxes

This paper presents a method for analyzing epicyclic gearboxes by evaluating the speeds, torques and power of the external elements in epicyclic gear mechanisms, as well as the total ratios of the gear box. The method is based on the equations that describe each epicyclic gear mechanism and rules that assign appropriate codes to the external elements. The method emphasizes how power flows are transmitted through the epicyclic gears, as well as power losses. Analysis of an epicyclic gear box is performed to illustrate the proposed method.     

Statistical characterization of surfaces of corroded steel plates

The statistical characteristics of corroded steel plate surfaces exposed to marine environments are of interest for assessing longer term structural safety and integrity using probabilistic methods. This requires information about the variability of corrosion loss and pitting over surfaces. The present paper reports on the observed statistical character of the surfaces of 10 large (1.2 m × 0.8 m × 3 mm thick) steel plates exposed in temperate climate marine immersion, tidal and splash zones for 2.5 years. For the analysis the plates were cut into smaller segments that were mechanically scanned to obtain digitised surface topographies. These were then analysed to estimate the correlation structure and the standard deviation of the surface topography. Considerable differences were found for these and for the mean corrosion loss between different exposure zones. For any one segment the surface topography was found to be highly statistically dependent, implying that smaller coupon sizes can provide adequate estimates of corrosion loss. From this it may be inferred that the deepest pits are not statistically independent as commonly assumed in extreme value statistical representations.     

Short trips: An opportunity for reducing mobile-source emissions?

This paper examines how conversion of automobile trips of less than 3 miles to other transportation modes reduces emissions. Short trips contribute disproportionately to emissions because of cold starts. An analysis is conducted of short-trip behavior across the US using the 1995 Nationwide Personal Transportation Survey. The data is used to develop likely scenarios of mode conversions for short trips, which are then applied to estimate emission savings using MOBILE6 cold start and running emission factors for volatile organic compounds, nitrogen oxides, carbon monoxide, and carbon dioxide. The results suggest that reducing short auto trips would modestly reduce mobile source air pollution, but emission reductions are high compared to most federally-funded surface transportation interventions aimed at improving air quality. Enhanced the community pedestrian environment to encourage short trip mode conversion also produces co-benefits such as increased physical activity and subsequent reductions in chronic diseases.     

Linking an activity-based travel demand model with traffic emission and dispersion models: Transport’s contribution to air pollution in Toronto

This paper describes the development of an integrated approach for assessing ambient air quality and population exposure as a result of road passenger transportation in large urban areas. A microsimulation activity-based travel demand model for the Greater Toronto Area – the Travel Activity Scheduler for Household Agents – is extended with capabilities for modelling and mapping of traffic emissions and atmospheric dispersion. Hourly link-based emissions and zone-based soak emissions were estimated. In addition, hourly roadway emissions were dispersed at a high spatial resolution and the resulting ambient air concentrations were linked with individual time-activity patterns derived from the model to assess person-level daily exposure. The method results in an explicit representation of the temporal and spatial variation in emissions, ambient air quality, and population exposure.     

Port performance in Asia: Does production efficiency imply environmental efficiency?

Atmospheric and water pollution are two main sources of negative environmental externalities generated by shipping. This study recognizes the negative externalities in the production of port services in East Asia by explicitly incorporating environmental impacts of shipping. Programming techniques are used to analyze 156 Origin–Destination pairs between 13 major East Asian ports, to derive the externality-augmented measures of port productivity and efficiency at the waterside. The results suggest that the inclusion of externality mitigation strategies can exert a considerable influence on efficiency performance.     

The environmental effects of airline carbon emissions taxation in the US

This study investigates how air traffic emissions taxes may impact carbon emissions in the US. The magnitude of emissions savings in the US domestic airline industry that would result from lower demand for air travel as taxes are levied and air fares increase is estimated. At the same time, the air-automobile substitution effect is considered and it is argued that some air travelers may divert to automobiles, thus increasing automobile carbon emissions. Both the analysis of the aggregate US domestic airline industry and the study of a sample of US domestic route markets indicate that potentially sizeable increases in automobile traffic and related emissions may substantially reduce the environmental benefits of air travel carbon emissions taxes. In some instances, carbon emissions may even increase in short-haul markets. Sensitivity analyses are performed to demonstrate the robustness of these findings.     

The impact of European climate change regulations on international tourist markets

We use a model of international and domestic tourist numbers and flows to investigate the effect of various climate policy instruments implemented in Europe on arrivals and emissions for the countries concerned. We find that these schemes do not fulfil their desired effects. The introduction of aviation into the European trading system results in a fall in the number of tourists travelling into the European Union in favour of other destinations. It also causes a significant welfare loss with only a small reduction in emissions. The flight taxes in the Netherlands and the UK result in different substitution effects across destinations (depending on the zones being taxed) but both policies do have the same consequence of inducing global welfare losses and also reducing visitor numbers to the countries. We find that when these policies are combined their effects are additive. Welfare impacts are robust to variations in the underlying assumptions and changes in the scope of the taxes examined have the expected effects.     

Diesel-engined vehicle nitric oxide and soot emissions during the European light-duty driving cycle using a transient mapping approach

An engine mapping-based methodology is developed to gain a first approximation of a vehicle’s performance and emissions during a light-duty cycle. The procedure is based on a steady-state experimental investigation of the engine with an appropriate vehicle drivetrain model applied so that the cycle vehicle speed data can be transformed into engine speed and torque. Correction analysis is then applied based on transient experimentation to account for the transient discrepancies during real driving. The developed algorithm is applied for the case of a diesel-engined vehicle running on the European light-duty cycle. A comparative analysis is performed for each section of the cycle revealing its individual transient characteristics.     

Long-term behavior of particulate matters at urban roadside and background locations in Seoul,Korea

The concentrations of particulate matter, PM_2.5, PM₁₀, and TSP at an urban roadside and an urban background station are analyzed. Data collected over a 10 year period are analyzed. The concentrations of the particulates measured at the urban site are systematically larger than at the background station. The mean PM values at the former also exhibit a slight fall over the decade unlike those at the background station. Overall, the particulate matters at both locations are in an intermediate range of global level, e.g., approximately two times lower than those in other Asian regions but higher than in Europe.     

The existence of an equilibrium solution to the traffic assignment problem when there are junction interactions

We consider a network with interactions and capacity constraints at each junction. We give conditions on the interactions and constraints which, if satisfied at each separate junction, ensure that any feasible assignment problem has an equilibrium solution. Two illustrative examples are provided; the first arises naturally and does not satisfy our conditions, while the second does satisfy our conditions but is somewhat unnatural.