Actively translating a rear diffuser device for the aerodynamic drag reduction of a passenger car

This research aims to develop an actively translating rear diffuser device to reduce the aerodynamic drag experienced by passenger cars. One of the features of the device is that it is ordinarily hidden under the rear bumper but slips out backward only under high-speed driving conditions. In this study, a movable arc-shaped semi-diffuser device, round in form, is designed to maintain the streamlined automobile??s rear underbody configuration. The device is installed in the rear bumper section of a passenger car. Seven types of rear diffuser devices whose positions and protrusive lengths and widths are different (with the basic shape being identical) were installed, and Computational Fluid Dynamics (CFD) analyses were performed under moving ground and rotating wheel conditions. The main purpose of this study is to explain the aerodynamic drag reduction mechanism of a passenger car cruising at high speed via an actively translating rear diffuser device. The base pressure of the passenger car is increased by deploying the rear diffuser device, which then prevents the low-pressure air coming through the underbody from directly soaring up to the rear surface of the trunk. At the same time, the device generates a diffusing process that lowers the velocity but raises the pressure of the underbody flow, bringing about aerodynamic drag reduction. Finally, the automobile??s aerodynamic drag is reduced by an average of more than 4%, which helps to improve the constant speed fuel efficiency by approximately 2% at a range of driving speeds exceeding 70 km/h.     

Dynamics analysis of an omni-directional vehicle

In a modern society, traffic congestion is a major problem in every metropolis. To solve the problem of traffic congestion an innovative omni-directional vehicle is proposed. This research has mainly focussed on developing the comprehensive vehicle dynamics model for an omni-directional road vehicle. Then the stability of the vehicle in the yaw plane was analysed under different scenarios based on the response of the side slip angle. Finally an active steering PID controller was suggested and which, according to the results of the simulation, improved the yaw plane stability.     

Dynamic analysis of seatbelt systems with anti-inertial release mechanisms

In order to prevent the uncontrolled release of seatbelt buckles due to high acceleration caused by pretensioners, anti-g buckles that have pendulum-shaped g-masses to block the releasing motion are commonly adopted in seatbelt systems. However, even with the wide applications of anti-g buckles, the underlying operational principles of anti-g buckles have yet to be investigated. This work studies conditions for the engagement of the g-mass to prevent inertial release, and conditions for maintaining a blocked state under very high acceleration. Using a multibody model of an anti-g buckle, the effects of various design parameters on the performance of the anti-g buckle have been examined. It turns out that design variables associated with the geometry of the g-mass and its contacting surface configuration play important roles. In order to account for the dynamic interaction between driver and seatbelt, a multibody model of a seatbelt system is combined with a dummy model to form a single dynamic system. Using the measured displacement of the buckle during the explosion of a pretensioner as the driving condition for simulation, dynamic analysis of the seatbelt with driver interaction has been carried out. Through comparison with measured and computed accelerations of webbing, which shows good agreement, the validity of the model has been demonstrated. The dynamic model for seatbelt and driver can be used as a design tool for the development of anti-g buckles.     

铁路货车防盗系统设计

针对铁路运输的货物在途中被盗现象，提出了货车、集装箱防盗系统的设计原理，给出了系统硬件结构示意图和软件设计框图并对其在 Ｔ Ｍ Ｉ Ｓ中的使用前景进行了展望。     

Surface chlorophyll in the Black Sea over 1978–1986 derived from satellite and in situ data

Absolute values of chlorophyll a concentration and its spatial and seasonal variations in the Black Sea were assessed by using satellite CZCS and in situ data. Since the satellite CZCS had operated for the 1978–1986 period, CZCS data was used for assessing the past state of the Black Sea just before the onset of drastic changes observed in late 1980s. The approach used for the calculation of the absolute values of chlorophyll a concentration from CZCS data was based on the direct comparison of in situ chlorophyll a data and those of CZCS and by applying the algorithm developed for the transformation of CZCS data into chlorophyll a values. CZCS Level 2 data related with pigment concentration having a spatial resolution of 1 km at nadir were used. The daily Level 3 files were derived by binning Level 2 values into 4-km grid cells and the monthly and seasonal Level 3 files were created by averaging the daily Level 3 files over the corresponding period. In situ chlorophyll a data were obtained by spectrophotometric and fluorometric methods in 15 scientific cruises over the 1978–1986 period. Total number of ship-measured data used for the comparison with those CZCS values was 590.Chlorophyll a concentration (Chl) was derived from CZCS values (C) with regression equations Chl=kC; the coefficient of transformation k was calculated from six different data sets by taking into account distinctions between subregions and seasons. The reasons for difference in the k values have been analyzed.Statistical comparison of the chlorophyll a values measured in situ and those derived from CZCS data was based on log-transformed data and gave the following results: regression SLOPE=0.842, regression INTERCEPT=−0.081, coefficient of determination (R²)=0.806, root–mean–square ERROR=0.195. The mean monthly chlorophyll a distributions derived from CZCS data over 1978–1986 have been constructed and the mean seasonal chlorophyll a values in different regions have been calculated and analyzed. The significant difference in chlorophyll concentration between the western shelf regions and the open part of the Black Sea has been demonstrated, especially in warm season. At almost all seasons, the highest chlorophyll concentration is observed in the western interior shelf region which is under strong influence of Danube. The summer mean chlorophyll concentration in this region is 18 times higher than that in the open parts and about nine times higher than in the eastern shelf region. The greatest seasonal variations are observed in the open part of the Black Sea: chlorophyll concentration in cold season is four to six times higher than in summer and three to five times higher than in April and October. To the contrary, in the western interior shelf regions, the concentration is higher in May–October (about twice than that in November–March). Seasonal variations in the western outer shelf regions are smoothed out as compared with both the western interior shelf and the open regions.     

A summary of the formation and seasonal progression of the Northeast Water Polynya

A summary of the seasonal development of the Northeast Water Polynya ice cover characteristics is presented. This is based primarily on satellite remote sensing observations, with some in situ measurements, including both new and published data.     

Heterogeneity assumptions in the specification of bargaining models: a study of household level trade-offs between commuting time and salary

With many real world decisions being made in conjunction with other decision makers, or single agent decisions having an influence on other members of the decision maker’s immediate entourage, there is strong interest in studying the relative weight assigned to different agents in such contexts. In the present paper, we focus on the case of one member of a two person household being asked to make choices affecting the travel time and salary of both members. We highlight the presence of significant heterogeneity across individuals not just in their underlying sensitivities, but also in the relative weight they assign to their partner, and show how this weight varies across attributes. This is in contrast to existing work which uses weights assigned to individual agents at the level of the overall utility rather than for individual attributes. We also show clear evidence of a risk of confounding between heterogeneity in marginal sensitivities and heterogeneity in the weights assigned to each member. We show how this can lead to misleading model results, and argue that this may also explain past results showing bargaining or weight parameters outside the usual [0,1] range in more traditional joint decision making contexts. In terms of substantive results, we find that male respondents place more weight on their partner’s travel time, while female respondents place more weight on their partner’s salary.     

Factors Influencing Behavior in a Boating Speed Zone

The greatest source of human-related mortality for endangered Florida manatees is collisions with watercraft. Regulation of boat speeds is the principal management tool to minimize this threat. Demands on law enforcement limit their ability to monitor boater behavior and managers seek alternative strategies to increase compliance. The purposes of this study were to: (1) explore the effectiveness of an on-site sign to enhance boater compliance in a boating speed zone, and (2) examine the environmental and boating characteristics that influence the probability of compliance. Signs designed to increase compliance were posted halfway through the 18-week study period. The signs were not related to compliance level. Logistic regression models showed that only time of day and boat type were significantly related to compliance. Results suggest that passive methods of persuasion may not be an effective means of influencing boater behavior.     

Productivity change in Nigerian seaports after reform: a Malmquist productivity index decomposition approach

ABSTRACT

During the 1990s, Nigerian seaports were considered inefficient, unsafe due to massive cargo theft (wharf rat phenomenon) and one of the most expensive port systems in the world. This resulted in long turnaround times for ships and increased container dwell times. As a result, port operations were transferred to the private sector through concession contracts. This paper employs a Malmquist productivity index (MPI) technique to benchmark pre-and post-reform total factor productivity growth of the six major Nigeria seaports (Apapa, Calabar, Onne, Port Harcourt, TinCan Island and Warri) for the period 2000–2011 which represents six years before (2000–2005) and six years after (2006–2011) the reform. The results indicate progress in technical efficiency of the ports after reform but deterioration in technological progress. Overall productivity growth was higher in the pre-concession period compared to the post-concession period. The source of pre-concession period productivity growth was technological progress while the change in productivity of the post-concession period is generated by an increase in scale efficiency. This suggests that concessionaires have not brought in the much anticipated investment in modern technology to drive port efficiency. The ports of Calabar and Apapa experienced the highest productivity growth while lowest result was Onne.