Time-series analysis of remote-sensed chlorophyll and environmental factors in the Santa Monica–San Pedro Basin off Southern California

The time-series of remote-sensed surface chlorophyll concentration measured by SeaWiFS radiometer from September 1997 to December 2001 and the relevant hydrological and meteorological factors (remote-sensed sea surface temperature, atmospheric precipitation, air temperature and wind stress) in Santa Monica Bay and adjacent waters off southern California were analyzed using wavelet and cross-correlation statistical methods. All parameters exhibited evident seasonal patterns of variation. Wavelet analysis revealed salient long-term variations most evident in air temperature during El Niño 1997–1998 and in wind stress during La Niña 1998–1999. Short-period (<100 days) variations of remote-sensed chlorophyll biomass were mostly typical to spring seasons. Chlorophyll biomass was significantly correlated with air temperature and wind stress: an increase of chlorophyll biomass followed with 5–6-day time lag an increase of wind stress accompanied by a simultaneous decrease of air temperature. The mechanism of these variations was an intensification of phytoplankton growth resulting from the mixing of water column by wind stress and entrainment of nutrients into the euphotic layer.     

Scantling multi-objective optimisation of a LNG carrier

Numerous real-world problems related to ship design can be solved by various alternatives. However, the scantling design has conflicting objectives such as minimum production cost, minimum weight and maximum moment of inertia (stiffness). Therefore a multi-purpose solution had to be settled in order to meet all these requirements at once. Ship design is a complex endeavour requiring successful coordination of many different disciplines, both technical and non-technical. Basic design is the least defined stage of the ship design process and seeks to define the optimal amidships section structure. For that purpose, recent improvements have been made to a numerical tool in order to optimise the scantling of ship sections by considering production cost, weight and moment of inertia in the optimisation objective function. A multi-criteria optimisation of a LNG carrier is conducted in this paper to illustrate the analysis process. Pareto frontiers are obtained and results have been validated by the Bureau Veritas rules. The methodology presented in this paper has demonstrated its effectiveness in optimising scantling of ships at a very early design stage thanks to a management of critical problems usually studied at a later stage of the design.     

The coastal edge of the Northeast Water polynya in spring 1993

Multidisciplinary, marine ecological observations were conducted at the shallow water edge of the Northeast Water in June, 1993. Although variable in size and shape, a small polynya was constantly present at Eskimonaes, at the fast-ice edge of Ingolfsfjord. A shallow stratified layer developed at the water sufface at negative water and air temperatures—an effect of sea ice melting in cold water early in the season. Nutrients were recorded in considerable quantities, although by mid July NO₃ had become depleted. The chlorophyll and phytoplankton maxima at 8–12 m depth had peak values of 2 mg chl a m⁻³, typical for Arctic algal blooms. The phytoplankton included over 90 species and was dominated by the Fragillariopsis group. Zooplankton was poor in biomass and density, but over 23 taxa were found, with the copepods Oithona similis and Pseudocalanus acuspes being numerically dominant. Sedimentation was approximately 0.2 g dry weight m⁻² d⁻¹ and suspended matter concentrations ranged from 4 to 19 mg l⁻¹. The benthos was represented by hard bottom forms only, with a surprisingly dense cover of macrophytes. Juvenile sea urchins (Strongylocentrotus droebachiensis), brittle stars (Ophiocten sericeum) and amphipods were dominant. Higher trophic levels were represented by benthic feeders, such as eiders and walruses. The area observed was more similar to high Arctic fjord ecosystems than to the offshore central Northeast Water polynya.     

Use of an activity diary survey to examine travel and activity reporting in a home interview survey: An example using data from Adelaide,Australia

Research presented in this paper uses results from an acitivity diary survey to comment on the quality of data collected in a home interview travel survey. The two surveys were conducted in Adelaide, Australia. Evidence is presented to suggest that although a period of slightly more than three years separated the two surveys, the samples were reasonably similar with respect to their socio-demographic composition and real mobility levels. There was, however, a much higher level of travel and out-of-home activity reporting in the activity diary when compared to the home interview survey. Differences in reporting rates are examined in detail and areas of deficiency with the home interview survey are identified. The paper concludes with a short discussion of the possible implications of these deficiencies when home interview survey data is used to investigate a range of urban transport issues.     

Perceptions of new electronic media for business communication

A model of communications media choice in business organizations is formulated based upon the results of exploratory interviews and the consumer choice literature. Choice is modelled as a function of organizational characteristics, individual characteristics, communication activity characteristics, communication initiator-recipient relationships and perceptions and feelings about available media. Hypotheses concerning media perceptions are developed from the exploratory interviews and tested using survey results from two firms in the Chicago region. The methodology developed in this research provides a useful approach to exploring preferences for and choices of communication media. As a paradigm for future research, it can be used to extend our understanding of communications media usage.     

Optimal roll control of an articulated vehicle: theory and model validation

This paper investigates optimal roll control of an experimental articulated vehicle. The test vehicle and the mathematical model used to design the control strategies are presented. The vehicle model is validated against experimental data from the test vehicle in passive configuration. The initial controller design, performed by Sampson (Sampson, D.J.M. and Cebon, D., 2003a, Achievable roll stability of heavy road vehicles. Proc. Instn. Mech. Engrs, Part D, J. Automobile Engineering, 217(4), 269-287), is reviewed and adapted for the experimental vehicle. The effect of not controlling all the axles on the vehicle is investigated and a variable vehicle speed controller is designed by interpolating between constant speed controllers. Substantial reduction in normalized load transfer is achieved for a range of manoeuvres, both in steady-state and transient conditions.     

Human-Centered Design of an Acc-With-Braking and Forward-Crash-Warning System

This paper addresses the development of driver assistance systems whose functional purposes are to provide both adaptive cruise control (ACC) and forward collision warning (FCW). The purpose of the paper is to combine concepts from human factors psychology, vehicle-dynamics, and control theory, thereby contributing to the body of knowledge and understanding concerning human-centered approaches for designing and evaluating driver assistance systems. Conceptual and experimental results pertaining to driving manually and with the assistance of ACC and FCW are presented. The following human-centered aspects of driver-assistance systems are analyzed and presented: the looming effect; including rule-based and skill-based behavior in the design of ACC systems; using desired dynamics in controlling the driving process; braking rules that trade headway range for deceleration level; and collision-warning rules based on two different stress indicators. Field-test data are examined to justify and verify the parametric values selected for use in human-centered ACC systems. Measured data from on-road driving are used to evaluate the performance of proposed FCW systems in braking situations. The paper concludes with observations concerning the difficulty of developing a clear understanding of when and why drivers brake.     

Adaptive control of the shifting process in automatic transmissions

This paper focuses on the way of keeping shift quality of automatic transmissions consistent in mass production and with mileage accumulation. We investigate the main factors influencing the consistency of shift quality. Test results show that the torque to pressure (T2P) and pressure to current (P2I) characteristics of shifting elements are easily affected. A simulation model of an 8-speed automatic transmission is established to simulate the dynamic process of clutch-to-clutch shift. Simulation results demonstrate that the change of T2P and P2I characteristics has a significant influence on shift quality. In order to compensate for the influences, we develop two adaptive control strategies, i.e., the adaptive control strategies for torque phase and inertia phase. They make use of the measured speed information and time information to evaluate shift quality. Then the control parameters are tuned to adapt to the change of T2P and P2I characteristics. Vehicle tests verify that the developed adaptive control strategies are effective to keep shift quality consistent in mass production and with mileage accumulation.     

Road Safety Strategies: A Comparative Framework and Case Studies

Abstract

This paper proposes a nine‐component analytical framework for developing, comparing, and evaluating road safety strategies. The nine components are: (1) vision; (2) objectives; (3) targets; (4) action plan; (5) evaluation and monitoring; (6) research and development; (7) quantitative modelling; (8) institutional framework; and (9) funding. While the first four components are essential for the formulation of a road safety strategy, the remaining components are key to its successful implementation. To demonstrate the usefulness of this comparative framework, we examine the road safety strategies of six selected administrations: Australia, California, Great Britain, Japan, New Zealand, and Sweden. In these case studies, we extract and highlight good practices in the formulation and implementation of their road safety strategies. The proposed framework also provides a systematic approach for assessing road safety strategies in other administrations. The evaluation of the six case studies forms a benchmarking platform for the planning, formulation, and implementation of good practices for road safety strategies.     

Agricultural vehicles and sustainable safe road traffic: solving conflicts on arterial highways

Addressing the issues of traffic safety in rural areas presents a constant challenge. The mix of light and heavy vehicles and the considerable differences in speed among these traffic participants result in high risks and delays for the faster vehicles. Agricultural vehicles (AVs) in particular have such an impact on traffic, especially when using arterial highways. This paper reviews the problems of safety and delays that AVs cause on arterial highways, and the appropriate mitigation. The concept of 'sustainable safety' in The Netherlands focuses on these problems, because of the proposed construction of parallel roads alongside all arterial highways. However, Dutch accident statistics cannot justify the high costs for the construction of parallel roads alongside 7000 km of arterial highways. Delays experienced by fast traffic are another reason for separating AVs from other road users with parallel roads. Alternative measures alongside the arterial highway, such as passing bays, restricting AVs to travelling at off-peak only and improving the conspicuity of the AVs, may be more cost-effective ways of reducing delays and/or improving traffic safety on arterial highways. Another solution may be to eliminate the need for AVs to use the arterial highway by altering their routes. For this purpose, land reallocation projects (as practised in Holland) can provide a useful tool.