The structure of dissipation in the western Irish Sea front

We report on an intensive campaign in the summer of 2006 to observe turbulent energy dissipation in the vicinity of a tidal mixing front which separates well mixed and seasonally stratified regimes in the western Irish Sea. The rate of turbulent dissipation ε was observed on a section across the front by a combination of vertical profiles with the FLY dissipation profiler and horizontal profiles by shear sensors mounted on an AUV (Autosub). Mean flow conditions and stratification were obtained from a bed mounted ADCP and a vertical chain of thermistors on a mooring. During an Autosub mission of 60 h, the vehicle, moving at a speed of ~ 1.2 m s^− 1, completed 10 useable frontal crossings between end points which were allowed to move with the mean flow. The results were combined with parallel measurements of the vertical profile of ε which were made using FLY for periods of up to 13 h at positions along the Autosub track. The two data sets, which show a satisfactory degree of consistency, were combined to elucidate the space–time variation of dissipation in the frontal zone. Using harmonic analysis, the spatial structure of dissipation was separated from the strong time dependent signal at the M₄ tidal frequency to yield a picture of the cross-frontal distribution of energy dissipation. A complementary picture of the frontal velocity field was obtained from a moored ADCP and estimates of the mean velocity derived from the thermal wind using the observed density distribution. which indicated the presence of a strong (0.2 m s^− 1) jet-like flow in the high gradient region of the front. Under neap tidal conditions, mean dissipation varied across the section by 3 orders of magnitude exceeding 10^− 2 W m^− 3 near the seabed in the mixed regime and decreasing to 10^− 5 W m^− 3. in the strongly stratified interior regime. The spatial pattern of dissipation is consistent in general form with the predictions of models of tidal mixing and does not reflect any strong influence by the frontal jet.     

Elemental composition, biochemical composition and caloric value of Antarctic krill.: Implications in Energetics and carbon balances

Samples of Antarctic krill were analyzed for elemental composition, biochemical composition, weight and caloric content. Sexes and maturity stages were separated. Mature females showed the highest caloric values (Joules) and juveniles the lowest in a per animal basis. On unit of wet weight per animal basis, spent females showed the lowest caloric values. For the caloric values by animal, a significant difference was found between males, mature females, spent females and juveniles, either on a per animal basis or in the basis of 1 g of wet weight, showing a real difference between the groups, regardless of their individual size. Significant differences were found for carbon, nitrogen and lipids, but not for proteins, analyzed in % of dry weight. Carbon was lowest for spent females and highest for mature females. On the contrary, nitrogen values were lowest for mature females and highest for males. Mature females had the highest lipid content and males the lowest. All variables were significantly correlated. For the linear regression analysis, the best correlation found was between Joules and carbon, followed by carbon vs. dry weight and Joules vs. dry weight. In an analysis with two independent variables, the best correlation was found for Joules vs. lipids and dry weight, followed by Joules vs. carbon and nitrogen, and Joules vs. lipids and proteins. The results obtained were used to make an analysis of the energy and carbon fluxes through the food chain in the sampled area, showing higher energetic and carbon “densities” in frontal areas, the POM calorific values showed an opposite pattern than that of krill.     

Influence of the slice position on chloride migration tests for concrete in marine conditions

Chloride migration tests are used to measure the concrete capacity to inhibit chloride attack. Many researchers carry out this test in a slice of concrete extracted from the central part of cylindrical specimens, discarding about 75% of the concrete used to mold the specimens. This fact generated the question: would it be possible to extract more slices from a same specimen without losing the confidence in the results? The main purpose of this work is to answer this question. Moreover, another aim of this study was to show the difference of chloride penetration between finished faces and the formwork surfaces of concrete beams and slabs. The results indicated that it is possible to use more slices of a single specimen for a chloride migration test. Moreover, it was demonstrated that there is a significant difference of chloride penetration between the finished surface and the formwork surface of the specimens.     

Development of railway station choice models to improve the representation of station catchments in rail demand models

ABSTRACT

This paper describes the development of railway station choice models suitable for defining probabilistic station catchments. These catchments can then be incorporated into the aggregate demand models typically used to forecast demand for new rail stations. Revealed preference passenger survey data obtained from the Welsh and Scottish Governments was used for model calibration. Techniques were developed to identify trip origins and destinations from incomplete address information and to automatically validate reported trips. A bespoke trip planner was used to derive mode-specific station access variables and train leg measures. The results from a number of multinomial logit and random parameter (mixed) logit models are presented and their predictive performance assessed. The models were found to have substantially superior predictive accuracy compared to the base model (which assumes the nearest station has a probability of one), indicating that their incorporation into passenger demand forecasting methods has the potential to significantly improve model predictive performance.     

Traffic noise abatement: How different pavements, vehicle speeds and traffic densities affect annoyance levels

In this paper, annoyance ratings from traffic noise recorded on cobblestones, dense asphalt, and open asphalt rubber pavements are assessed with regard to car speeds and traffic densities. It was found that cobblestones pavements are the most annoying; also while open asphalt rubber pavement imposes less annoyance than dense asphalt it is not significantly different. Higher car speeds always lead to greater annoyance, as does higher traffic densities. LAeq and LAmax correlate well with annoyance, but loudness is the best predictor. Roughness and sharpness exhibit inconsistent interactions.     

Assessing the representativeness of a smartphone-based household travel survey in Dar es Salaam,Tanzania

The household travel survey (HTS) finds itself in the midst of rapid technological change. Traditional methods are increasingly being sidelined by digital devices and computational power—for tracking movements, automatically detecting modes and activities, facilitating data collection, etc.. Smartphones have recently emerged as the latest technological enhancement. FMS is a smartphone-based prompted-recall HTS platform, consisting of an app for sensor data collection, a backend for data processing and inference, and a user interface for verification of inferences (e.g., modes, activities, times, etc.). FMS, has been deployed in several cities of the global north, including Singapore. This paper assesses the first use of FMS in a city of the global south, Dar es Salaam. FMS in Dar was implemented over a 1-month period, among 581 adults chosen from 300 randomly selected households. Individuals were provided phones with data plans and the FMS app preloaded. Verification of the collected data occurred every 3 days, via a phone interview. The experiment reveals various social and technical challenges. Models of individual likelihood to participate suggest little bias. Several socioeconomic and demographic characteristics apparently do influence, however, the number of days fully verified per individual. Similar apparent biases emerge when predicting the likelihood of a given day being verified. Some risk of non-random, non-response is, thus, evident.     

Back-Calculation of Ground Stress Field and Rockburst Analysis for Wunvfeng Tunnel北大核心CSCD

Studying the in-situ stress distribution at a tunnel site is very important to determine surrounding rock characteristics, the engineering design and the construction scheme. By using the multiple linear regression method based on the least square algorithm, the initial geostress field is analyzed and the corresponding regression coefficients are obtained. The ground stress obtained from the proposed back analysis is reasonable and can meet the demands of the engineering applications. From the rockburst risk level distribution diagram, it is speculated that the Wunvfeng tunnel is in the high filed stress area. Field monitoring should be strengthened and emergency plans should be made to cope with the rockburst risks during the construction process. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Driver fatigue: a vision-based approach to automatic diagnosis

In this paper, we describe a system that locates and tracks the eyes of a driver. The purpose of such a system is to perform detection of driver fatigue. By mounting a small camera inside the car, we can monitor the face of the driver and look for eye movements which indicate that the driver is no longer in condition to drive. In such a case, a warning signal should be issued. This paper describes how to find and track the eyes. We also describe a method that can determine if the eyes are open or closed. The primary criterion for this system is that it must be highly non-intrusive. The system must also operate regardless of the texture and the color of the face. It must also be able to handle changing conditions such as changes in light, shadows, reflections, etc. Initial experimental results are very promising even when the driver moves his/her head in a way such that the camera does not have a frontal view of the driver’s face.