Experimental Investigation of TARMAX Model for Modeling of Hydrodynamic Forces on Cylinder-like Structures

A new approach that models lift and drag hydrodynamic force signals operating over cylindrical structures was developed and validated. This approach is based on stochastic auto regressive moving average with exogenous (ARMAX) input and its time-varying form, TARMAX. Model structure selection and parameter estimation were discussed while considering the validation stage. In this paper, the cylindrical structure was considered as a dynamic system with an incoming water wave and resulting forces as the input a...     

Experimental design influences on stated choice outputs: An empirical study in air travel choice

Discrete choice experiments are conducted in the transport field to obtain data for investigating travel behaviour and derived measures such as the value of travel time savings. The multinomial logit (MNL) and other more advanced discrete choice models (e.g., the mixed MNL model) have often been estimated on data from stated choice experiments and applied for planning and policy purposes. Determining efficient underlying experimental designs for these studies has become an increasingly important stream of research, in which the objective is to generate stated choice tasks that maximize the collected information, yielding more reliable parameter estimates. These theoretical advances have not been rigorously tested in practice, such that claims on whether the theoretical efficiency gains translate into practice cannot be made. Using an extensive empirical study of air travel choice behaviour, this paper presents for the first time results of different stated choice experimental design approaches, in which respective estimation results are compared. We show that D-efficient designs keep their promise in lowering standard errors in estimating, thereby requiring smaller sample sizes, ceteris paribus, compared to a more traditional orthogonal design. The parameter estimates found using an orthogonal design or an efficient design turn out to be statistically different in several cases, mainly attributed to more or less dominant alternatives existing in the orthogonal design. Furthermore, we found that small designs with a limited number of choice tasks performs just as good (or even better) than a large design. Finally, we show that theoretically predicted sample sizes using the so-called S-estimates provide a good lower bound. This paper will enable practitioners in better understanding the potential benefits of efficient designs, and enables policy makers to make decisions based on more reliable parameter estimates.     

Assessing the cost of transfer inconvenience in public transport systems: A case study of the London Underground

Few studies have adequately assessed the cost of transfers² in public transport systems, or provided useful guidance on transfer improvements, such as where to invest (which facility), how to invest (which aspect), and how much to invest (quantitative justification of the investment). This paper proposes a new method based on path choice,³ taking into account both the operator’s service supply and the customers’ subjective perceptions to assess transfer cost and to identify ways to reduce it. This method evaluates different transfer components (e.g., transfer walking, waiting, and penalty) with distinct policy solutions and differentiates between transfer stations and movements.The method is applied to one of the largest and most complex public transport systems in the world, the London Underground (LUL), with a focus on 17 major transfer stations and 303 transfer movements. This study confirms that transfers pose a significant cost to LUL, and that cost is distributed unevenly across stations and across platforms at a station. Transfer stations are perceived very differently by passengers in terms of their overall cost and composition. The case study suggests that a better understanding of transfer behavior and improvements to the transfer experience could significantly benefit public transport systems.     

Timetable-based operation in urban transport: Run-time optimisation and improvements in the operating process

Urban public transit provides an efficient means of mobility and helps support social development and environmental preservation. To avoid loss of ridership, transit authorities have focussed on improving the punctuality of routes that operate using timetables. This paper presents a new approach to generating run-time values that is based on analytical development and micro simulations. The work utilizes previous research (described herein) and the experience acquired by Transports Metropolitans de Barcelona (TMB) in operating bus routes based on timetables. Using a sample of historical data, the method used for generating run-time values consists of the following steps: purging and screening atypical trips, based on the consideration of confidence intervals for median trips; segmenting the day into time bands based on the introduction of a new hierarchical classification algorithm; creating initial run-time values based on criteria derived from statistical analysis; adjusting and validating initial run-time values using micro simulations; and evaluating incident-recovery times at the end of trips in order to guarantee the punctual departure of the next trip in the vehicle schedule. To favour service improvement, we also introduced certain indicators that can identify the root causes of non-compliance. As a final step, in order to ensure the applicability and use of the model, we promoted the development of our model within the framework of the HASTUS™ software solution.     

炎热天气对钢渣混凝土抗压强度的影响

将普通混凝土和钢渣质量分数为10％、30％和50％的混凝土试件分别放入40℃、50℃和60℃的热水中,测试了不同龄期试件的抗压强度和超声波脉冲速度,分析了炎热天气对钢渣混凝土抗压强度的影响.分析结果表明:在测试龄期内,各混凝土试件的抗压强度并不随着炎热天气的影响而发生削减;钢渣混凝土试件在第90 d达到最高抗压强度61...     

Use of GIS-Based Models for Integrating and Developing Marine Fish Cages within the Tourism Industry in Tenerife (Canary Islands)

Site selection is a key factor in any aquaculture operation, affecting both success and sustainability. Moreover, it can solve conflicts between different coastal activities, making a rational use of the coastal space. Geographical information systems (GIS) have become of increased significance for environmental planning and assessment mainly because of the need to compare a great number of spatially related data, and because it can be used to couple these spatial data with their attributes and overlay them. This study used GIS and related technology to build a spatial database using those criteria which were considered to have any influence in integrating marine fish-cage culture within the tourism industry in Tenerife. Criteria were grouped in three submodels (distance to beaches, nautical sports, and viewshed), which were combined to generate a final output showing the most suitable areas for cage culture development in coexistence with tourism. Most areas of the coastline of Tenerife were identified as being suitable (56%) or very suitable (46%), suggesting that marine cage aquaculture could be developed on the island in coexistence with the well-established tourism industry.     

The commercialization of East European liner shipping: the experience of Poland

This paper will examine the impact of continuous and increasing change in the shipping sector of Eastern Europe with particular reference to the liner sector in Poland one of the more dynamic markets that has emerged since the political, economic and social changes of the late 1980s. Polish Ocean Lines, and in particular POL Levant, a relatively new, commercialized subsidiary operating in the private sector, are taken as case studies to assess the new structures that are emerging in the marketplace.     

Estimates of vertical mixing during a Lagrangian experiment off the Galician coast

An adjoint 1-D model was used to determine vertical diffusivity coefficients from temperature profiles collected within a filament escaping from the Galician coast following an upwelling event. The optimisation scheme ended with relatively high diffusivity values within the thermocline (9×10⁻⁵ m² s⁻¹). Such high values are relevant for biogeochemical exchanges between surface and deep waters in stratified areas.The optimised values were several orders of magnitude higher than the bulk of diffusivity measurements recorded with a free-falling device; however, the optimisation solution was consistent with the arithmetic mean of the measurements in the thermocline (7.7×10⁻⁵ m² s⁻¹), giving more weight to the few largest values. Below the thermocline, the data assimilation method failed because of the three-dimensional nature of the advective field of the upwelling system. Ignoring this advective forcing in the model led to estimates that were two orders of magnitude too high.The results suggest that turbulent mixing is a random process where a few intense events determine the average mixing that drives the long-term evolution of the water column structure. This statistical property is very important when one wants to use instantaneous diffusivity measurements for modelling purposes.     

Characteristics and calculation method of sound radiation of cylindrical shell with porous sound-absorbing material under acoustic excitation北大核心CSCD

［Objective］This paper aims to study the characteristics and calculation method of the vibration and sound radiation of single ring-stiffened cylindrical shells with porous fiber composite materials installed in the inner wall under acoustic excitation. ［Method ］ Based on the equivalent fluid theory model of Johnson–Champoux–Allard (JCA) and the transfer matrix of the multilayer medium, a theoretical formula of the sound absorption coefficient of multilayer sound absorption structures is derived. The three methods for calculating the vibration and sound radiation of a single ring-stiffened cylindrical shell with porous fiber materials under acoustic excitation, namely acoustic solid modeling of porous media, finite element model combined with theoretical formula and imposition of impedance boundary on sound absorption coefficient, are then verified and compared. Finally, the influences of sound-absorbing material's thickness, backed-air gap, static flow resistance, and material arrangement order on the acoustic absorption performance of the cylindrical shell are investigated. ［Results］The results show that laying porous fiber composite materials on the cylindrical shell internally can reduce the vibration and acoustic radiation of cylindrical shell structure. The sound absorption coefficient curve can quickly and effectively predict the resulting trend of the vibration and sound radiation of the cylindrical shell. ［Conclusion］The acoustic absorption performance of sound absorption structures can be effectively improved through the rational design of their properties and arrangement order of the sound-absorbing materials in order to achieve the purpose of vibration and noise reduction. © 2023 Chinese Journal of Ship Research. All rights reserved.     

Experimental study of drillship resistance performance in open and closed state of moonpool北大核心CSCD

[Objective] This paper carries out an experimental study of a multi-function dirllship model with moonpool structure in towing tank, aiming at analyzing the effects of the moonpool structure on the ship resistance in open and closure condition.[Methods]Taking a dirllship as the research object, the ship motion response in regular and irregular waves is investigated. The resistance of the ship in hydrostatic water and waves is measured with tension sensors, and the acceleration characteristics of the bow, midship and stern are analyzed by acceleration sensors.[Results]The results indicate that hull resistance under light load conditions is greater when open moonpool, while hydrostatic water resistance with closed moonpool is greater under design load conditions. The closed moonpool in regular waves reduces stern acceleration by 58.2%, bow resistance by 46.7% and heave response by 41.8%. The peak of resistance at the bow in irregular waves is about ten times higher than that at the stern, and the peak of resistance occurs more often when the moonpool is open at the same time.[Conclusions]The experimental study shows that the difference in load conditions changes the waterplane area and affects the hull resistance in hyrostatic water. In contrast, the closure of the moonpool not only reduces acceleration and resistance, but also improves surge and heave. As such, this paper can provide references for the structural design of drillships with moonpools. © 2023 Journal of Nanjing Agricultural University. All rights reserved.