Tradeoffs among free-flow speed, capacity, cost, and environmental footprint in highway design

This paper investigates differentiated design standards as a source of capacity additions that are more affordable and have smaller aesthetic and environmental impacts than modern expressways. We consider several tradeoffs, including narrow versus wide lanes and shoulders on an expressway of a given total width, and high-speed expressway versus lower-speed arterial. We quantify the situations in which off-peak traffic is sufficiently great to make it worthwhile to spend more on construction, or to give up some capacity, in order to provide very high off-peak speeds even if peak speeds are limited by congestion. We also consider the implications of differing accident rates. The results support expanding the range of highway designs that are considered when adding capacity to ameliorate urban road congestion.     

Modelling travellers’ risky choice in a revealed preference context: a comparison of EUT and non-EUT approaches

Recent work on risky choice modelling has sought to address the shortcomings of expected utility theory (EUT) by using non-expected utility theoretic (non-EUT) approaches. However, to date these approaches have been merely tested on stated choice data which is flexible and cheap. In this study, we empirically investigate the feasibility and validity of non-EUT approaches in a revealed preference (RP) context in which travel time distribution is extracted from observed historical travel time data, and subsequently present systematic comparisons between EUT, weighted utility theory, rank-dependent expected utility theory, and prospect theory (PT). The empirical evidence indicates that each non-EUT model has important behavioural insights to offer, moreover, EUT as well as non-EUT models can be applied to the RP context. However, the EUT and non-EUT model fits are generally similar with only PT providing a marginally improved model fit over EUT. The key findings presented in this study reinforce the importance of exploring non-EUT models within a revealed preference context before they can be applied reliably to modelling risky choices in the real world.     

CFD Analysis of Ship-to-Ship Hydrodynamic Interaction

A numerical study of ship-to-ship interaction forces is performed using a commercial CFD code, and the results are compared with experimental data and with the results of a panel method analysis. Two ship models have been used in the interaction forces analysis: a tug and a tanker, advancing parallel to each other with different lateral distances and two different values of the fluid depth. Computations are carried out with four different flow models: inviscid and viscous flow with the free surface modeled as a rigid wall and inviscid and viscous flow with the deformable free surface. A fair agreement was obtained with available experimental data and results obtained by panel method. The influence of viscosity in the computations is found to be comparatively weak, while the wavemaking effects may be important, at small magnitude of the horizontal clearance.     

Development of railway station choice models to improve the representation of station catchments in rail demand models

ABSTRACT

This paper describes the development of railway station choice models suitable for defining probabilistic station catchments. These catchments can then be incorporated into the aggregate demand models typically used to forecast demand for new rail stations. Revealed preference passenger survey data obtained from the Welsh and Scottish Governments was used for model calibration. Techniques were developed to identify trip origins and destinations from incomplete address information and to automatically validate reported trips. A bespoke trip planner was used to derive mode-specific station access variables and train leg measures. The results from a number of multinomial logit and random parameter (mixed) logit models are presented and their predictive performance assessed. The models were found to have substantially superior predictive accuracy compared to the base model (which assumes the nearest station has a probability of one), indicating that their incorporation into passenger demand forecasting methods has the potential to significantly improve model predictive performance.     

Aggregating mobile object trajectories: cumulative time geographic density estimation for GPS data

We present new approaches that expand upon the time geographic density estimation (TGDE) framework previously employed to estimate potential path trees. In the past, TGDE metrics have identified possible locations an individual moving object may have passed between, given known origin and destination points. This paper utilizes a new form of TGDE to investigate taxicab GPS traces over a specified time horizon with position ‘gaps’. To this end, we propose a new extension to the TGDE framework, TGDE-C, which is used to determine the cumulative TGDE values for a group of GPS traces, at a given location. These metrics are applied to multiple taxis and allow for time of day analysis. Additionally, we combine these new extensions with existing TGDE metrics that allow us to determine how accessible individual or groups of vehicles are to urban opportunities.     

Model Test on Grouting Law in Dynamic Water-Rich Sand Layers by the Electric Resistance Method北大核心CSCD

In order to study the diffusion law of grouting slurry in the water-rich sand layer under flowing water conditions, a grouting test model consisting of a main test system, a grouting system, and a measurement system was developed. And for detecting the diffusion scope of the grouts, a new resistivity method was proposed. It is found that the relationship between grouting pressure and grouting rate during the test is strong. Under hydrodynamic conditions, the grouting slurry diffuses elliptically. Due to gravity and the effect of the upper water flow, the center of gravity of the ellipsoid is below the grouting outlet, and the grouting effectively improves the physical and mechanical properties of water-rich sand bodies. At the same time, the resistivity method has a good application effect on the detection of grouting diffusion range. The range of slurry diffusion obtained by the resistivity method is basically consistent with the boundary of the stone body after excavation, indicating that the resistivity method is reliable for detection of grouting range in dynamic water-rich sand layer. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Coastal Tourist Interest in Value-Added,Aquaculture-Based,Culinary Tourism Opportunities

Despite increasing focus on sustainable aquaculture investment in the U.S. coastal zones, the aquaculture industry continues to face skepticism among consumers due to perceived negative environmental impacts, and health and food safety concerns. Partnering with culinary tourism and local food promotion efforts has potential for improving public outreach about the benefits of aquaculture, especially in coastal destinations where sustainable marine aquaculture and tourism are both occurring. Culinary tourism implies that local foods reflect the local livelihood and culture, and may be important to the tourist's experience. Aquaculture is becoming increasingly valuable to coastal destinations for assuring the steady availability of local seafood to meet demand and retaining commercial fisheries as a means to differentiate themselves to tourists. This study examined the role of subjective knowledge and attitude about aquaculture, and their effect on intention to participate in value-added culinary aquaculture tourism experiences. The study found that tourists' subjective knowledge and attitude about aquaculture influenced intentions to participate in culinary aquaculture tourism. In order for farmers or tour operators to be successful in diversifying with value-added culinary aquaculture, attention needs to be paid to educating consumers, which may be possible through strategic partnerships with tourism organizations, chefs, and restaurants.     

The Dependency of People on the Great Barrier Reef,Australia

Understanding how people are dependent on Large Scale Marine Protected Areas (LSMPAs) is important for understanding how people might be sensitive to changes that affect these seascapes. We review how resource dependency is conceptualized and propose that it be broadened to include cultural values such as pride in resource status, scientific heritage, appreciation of aesthetics, biodiversity, and lifestyle opportunities. We provide an overview of how local residents (n = 3,181 face-to-face surveys), commercial fishers (n = 210, telephone surveys), and tourism operators (n = 119 telephone surveys) are potentially dependent on the Great Barrier Reef (GBR), a region currently experiencing significant environmental, social, and economic change. We found that commercial fishers and tourism operators were dependent not only financially on the GBR, but also because of their age, years in the industry and region, lack of education, and the number of dependents. These stakeholders lacked flexibility to secure alternative employment. All stakeholder groups, regardless of economic imperatives, were dependent on the GBR because of their cultural connections. We propose that resource dependency also provides an umbrella concept to describe the cultural services provided by an ecosystem, which can be described through place-based dependence and place-identity.     

Situation analysis forecasting: the case of European maritime clusters

Within the literature concerned with aspects of competitiveness, innovation and strategic management of industrial clusters, the body regarding forecasting of strategic management is still nascent. This work aspires to render a contribution within the domain of strategic management forecasting, through the indicative case of European maritime clusters. For this end, a two-tier model is formulated. A quantitative strengths, weaknesses, opportunities, and threats (SWOT) methodology that derives from the fusion of a quondam situation analysis and crosstabs’ theory is generated. This leads to the utilization of the crosstab’s conditional probabilities as transition probabilities; the latter are called to compile the transition matrix of a Markov chain. Through this methodology, and the successive Markov chain’s transition matrices, strategic forecasts are extracted for a devised European maritime cluster case. This work relinquishes a novel application with respect to strategic management forecasting, that provides a dichotomy of practical interpretations and scenarios for quantitative situation analysis. Thus, it may enable effective real-time decision-making for strategic management and/or policy drafting. The situation analysis forecasting model may find applicability in a plethora of practical and theoretical cases, wherein forecasting may be desirable. It may as well pertain to an intrinsic methodology for situation analysis forecasting of maritime clusters.     

Methodology for ro-ro ship and fleet sizing with application to short sea shipping

A novel methodology is developed for determining the characteristics of a cargo roll-on/roll-off (ro-ro) ship and the fleet size required for a given short sea shipping route. The ship and required fleet size to satisfy the transportation demand (for each pair of speed and freight rate) are determined using a database of existing cargo ro-ro ships to obtain the main technical characteristics of the most suitable ship. The time charter, voyage costs and revenue are then calculated considering the technical characteristics of each ship. Fuel costs are corrected for the actual ship speed and loading condition. A number of restrictions in the transportation problem are considered leading to the exclusion of unfeasible solutions. The maximum profit over the period of a year is identified among the feasible pairs of speed and freight rate. This general methodology is applied in a case study that considers the route between Leixões (Portugal) and Rotterdam (Netherlands). The study allows the identification of the most suitable ship and fleet sizes for different market penetration levels and quantifies the impact on shipping company profit of changes in parameters such as fuel costs, time charter costs, emission control area, installed propulsion power and stacking factor.