Chaotic movement of vortices in superconductors of high-Tc superconducting maglev system at a high speed

Vortex motion in superconductors of higb-Tc superconducting maglev system is studied by a computational simulation.The vortex system is treated in a similar fashion,as a system where defects arc arrang...     

Multiaxial stress creep rupture mechanisms of AZ31 magnesium alloy

The maximum principal stresses, von Mises effective stresses and principal facet stresses at the time of creep rupture were compared in uniaxial, biaxial, and triaxial stress states for AZ31 magnesium alloy. The creep rupture of this alloy was experimentally controlled by cavitation, which was the result of a low damage tolerance, λ. Creep deformation could be correlated with the von Mises effective stress parameter. The failure-mechanism control parameter governing the stress state coincided with the experimental results of the rupture of the materials under multiaxial stress states. Finally, the theoretical prediction based on constrained cavity growth and continuous nucleation agreed with the experimental rupture data to within a factor of three.     

Implementation of discharging/charging current sensorless state-of-charge estimator reflecting cell-to-cell variations in lithium-ion series battery packs

This paper offers novel insights to the design and implementation of an innovative state-of-charge (SOC) estimator for the lithium-ion (Li-Ion) series battery pack. The most interesting feature of this approach is that it can utilize information from each filtered terminal voltage of the Li-Ion cells connected in series for SOC estimation of the battery pack. Without actual sensing each discharging/charging current (DCC) applied to the Li-Ion cells, it is possible to extract each DCC estimation from the corresponding filtered terminal voltages with an equivalent electrical circuit model (EECM) identification of all Li-Ion cells in the battery pack. There are two advantages to SOC estimation of the battery pack with this approach. First, the proposal can be implemented simply and effectively, reducing the computational steps required for SOC estimation. By reducing computational steps, the proposal is expected to be more cost-effective. Second, the approach guarantees an improved SOC performance, even if the battery pack results in inevitable cell-to-cell variation among Li-Ion cells. Accordingly, there are fewer differences to previously estimated DCCs among Li-Ion cells. Specifically, all values from the estimated DCCs are properly compensated for by simultaneous parameter modification according to each cell’s electrochemical characteristics. Experimental results clearly demonstrate that our DCC sensorless SOC estimator provides robust SOC performance for the battery pack. This approach considered an experimental battery pack (12S1P) connected in series using 2.6 Ah LiCoO2 cells produced by Samsung SDI.     

Challenges and Prospects of Fisheries Co-Management under a Marine Extractive Reserve Framework in Northeastern Brazil

In Brazil, Marine Extractive Reserves—MERs (Reservas Extrativistas Marinhas) represent the most significant government-supported effort to protect the common property resources upon which traditional small-scale fishers depend. From an initial small-scale experience in 1992, MERs have expanded countrywide, now encompassing 30 units (9,700 km²) and nearly 60,000 fishers. Despite such escalating interest in the model, there is little research on the effectiveness of MERs. In this article, we discuss relevant parts of the history and examine the current situation of the fisheries co-management initiative in the Marine Extractive Reserve of Corumbau, which was created in 2000 as the first MER to encompass coral reefs and reef fisheries. We describe the Extractive Reserve co-management arrangement and its main policy and legislative challenges. Finally, we discuss the prospects for the use of MERs as management frameworks for traditional small-scale fisheries in Brazil.     

Damage detection in offshore structures using neural networks

This paper discusses the damage detection in offshore jacket platforms subjected to random loads using a combined method of random decrement signature and neural networks. The random decrement technique is used to extract the free decay of the structure from its online response while the structure is in service. The free decay and its time derivative are used as input for a neural network. The output of the neural network is used as an index for damage detection. It has been shown that function N is effective in damage detection in the members of an offshore structure. Experimental studies conducted on a reduced model for a real jacket structure with geometrical scale of 1:30 are used. The applied loads were random loads. Two different load spectra were used: White noise, and Pierson-Moskowitz.     

Evaluating locational accessibility to the US air transportation system

Although there are hundreds of airports that support commercial air passenger traffic in the United States (US), not all areas are equivalently served by the commercial air transportation system. Locations in the US differ with respect to their level of access to the commercial air network and their overall accessibility within the system. Given the complexity of the domestic commercial air passenger network and supporting infrastructure, past research has only been able to provide a limited assessment of locational accessibility within the United States. To address these complexities, this paper proposes a new metric that incorporates measures of access to air transport as well as accessibility within air transportation networks. Using a comprehensive dataset on scheduled airline service, the developed approach is then applied to the US domestic commercial passenger air transportation network to explore geographic differentials in accessibility. Results suggest marked differences between core-based statistical areas throughout the US.     

Parking policies in large cities in Germany

This article deals with highly motorized large West German cities of about 200,000 inhabitants and more, which usually provide reasonable public transport systems. Illegal parking with shares of about 40 to 50% of the total parking is widespread in the parking problem areas of those cities, especially in the inner-city residential and mixed-use areas. Parking spaces are demanded by residents, employees, customers and visitors, and by delivery and service traffic. The different characteristics of parking demands by different user groups are discussed. The total parking supply consists of public and private spaces. The share of private spaces is about 40 to 50% of the total parking spaces in German cities. The amount of car traffic generated by a parking space depends on parking duration and parking turnover, as well as on search traffic. So the change of a space from long-duration use of an employee to short-duration of customers — as often discussed in parking concepts — generates at least five-fold car traffic. The measurements and effects of parking control of public spaces as well as the parking regulations in zoning ordinances, restrictions on the construction of new private parking spaces and park-and-ride are discussed. Finally, a parking concept methodology — using the example of Frankfurt am Main — is discussed.     

Longhaul feeder services in an era of changing technology: an Asia-Pacific perspective

Traditional liner carriers, operating in the highly competitive commercial environment of the last few years, have attempted to lower the marginal cost of each box carried. Technological improvements in both construction and propulsion systems have led to a steady growth in carrying capacity. Ships of 600+ TEUs are now in service and, as a result of this trend, have displaced 'smaller' ships from the major east-west trades. The more competitive environment of these trades has in turn led to a redeployment of ships in the 2500+ TEU range to the north-south trades. The result has been a rapid increase in north-south capacity, including feeder services and falling freight rates. Despite the current excess supply in shipping and historically low freight rates, significant developments in technology have created opportunities for new fast containerships. The paper analyses the key economic factors in the differentiation of the new fast ship technology from the traditionally designed containerships and demonstrates the potential financial viability to owners of these new 'greyhounds'.     

Measuring the potential for automobile fuel savings in the US: The impact of obesity

High rates of oil consumption and obesity in the US have become important socioeconomic concerns. While these concerns may seem unrelated at first, growing obesity rates in the US increase fuel consumption by adding passenger weight to vehicles. This paper estimates the additional amount of fuel (i.e., gasoline) consumed annually by noncommercial passenger highway vehicles in the US due to passenger overweight and obesity. The mathematical model presented in this paper estimates that as many as one billion additional gallons of gasoline are consumed each year due to overweight and obesity in the US, accounting for up to 0.8% of the fuel consumed by these vehicles annually. This additional fuel consumption causes carbon dioxide emissions of up to 20 billion pounds or more, accounting for up to 0.5% of the annual carbon dioxide emissions in the transportation sector.     

Optimal scheduling of the flexray static segment based on two-dimensional bin-packing algorithm

FlexRay is a reliable and hard real-time in-vehicle communication protocol that is strongly promoted by car manufacturers as the de facto standard in the automotive domain. The protocol offers both a time-triggered and an eventtriggered architecture. This paper focuses on the optimal scheduling of the time-triggered component of FlexRay known as the static (ST) segment using a two-dimensional bin-packing technique. To maximize the bandwidth utilization in the ST segment, a fast heuristic as well as an efficient integer linear programming approach are proposed. Our methods directly schedule signals into slots including frame packing, according to signal-based data scheduling and the slot/ cycle multiplexing mechanisms presented by the latest version of the FlexRay protocol. The benefits of our proposed methods are demonstrated by extensive experiments on synthetic and an automotive X-by-wire system case study. An additional test case is examined to emphasize the superior performance of the proposed approach relative to that of existing optimal scheduling approaches.