柴油超临界喷雾大涡数值模拟研究

随着现代内燃机燃烧室内温度和压力的不断提升,液体燃料往往处于超临界状态,与亚临界状态相比,其喷雾射流行为特征发生了很大的变化.本研究采用大涡数值模拟方法对超临界环境下的单组分和多组分柴油表征燃料喷雾射流进行数值计算,对比了不同气体状态方程预测柴油表征燃料超临界射流行为的差异性,发现PR气体状态方程对正庚烷质量分数分布的...     

GPS一机多天线技术在公路边坡灾害监测中的应用研究

文章主要介绍了GPS一机多天线监测系统及其在公路边坡变形监测中的实际应用情况,通过实践可以证明:GPS一机多天线监测系统的定位精度可以达到3～5mm,与常规的GPS静态相对定位的精度相当,同时能够大大降低GPS监测系统的成本,使得公路边坡灾害监测能够实现高精度、自动化和全天候等目标。     

Suspension system state estimation using adaptive Kalman filtering based on road classification

This paper provides a new method to solve the problem of suspension system state estimation using a Kalman Filter (KF) under various road conditions. Due to the fact that practical road conditions are complex and uncertain, the influence of the system process noise variance and measurement noise covariance on the estimation accuracy of the KF is first analysed. To accurately estimate the road condition, a new road classification method through the vertical acceleration of sprung mass is proposed, and different road process variances are obtained to tune the system’s variance for the application of the KF. Then, road classification and KF are combined to form an Adaptive Kalman Filter (AKF) that takes into account the relationship of different road process noise variances and measurement noise covariances under various road conditions. Simulation results show that the proposed AKF algorithm can obtain a high accuracy of state estimation for a suspension system under varying International Standards Organisation road excitation levels.     

基于车辆平顺性分析的橡胶衬套动态特性建模

橡胶衬套的动态特性与载荷的激振频率、幅值等因素相关,其模型的准确性影响车辆平顺性的仿真精度。建立了包含材料弹性、粘弹性与弹塑性的橡胶衬套动态模型,分别采用多项式、分数导数与Bouc-wen模型描述橡胶衬套的弹性、频率相关性及振幅相关性。通过参数辨识确定衬套模型参数并进行仿真,验证了所建模型的准确性。     

货车后下部防护装置强度的试验方法研究

分析我国货车后下部防护装置标准的强度试验方法与国外法规的差异,并通过仿真分析对比货车后下部防护装置在静态加载、壁障碰撞和车辆追尾下的变形特性、吸能效果及其差异性,提出国标中存在的一些问题及修改建议。     

旧水泥混凝土路面再生利用的试验研究

结合实际工程要求,将旧水泥混凝土路面破碎成5~40mm的再生集料,选用2种外加剂进行了C35再生混凝土的配制试验.研究结果表明,在所设计的配合比下,再生混凝土的流动性和体积密度相对较小,凝结时间和含气量均在可控范围之内.再生混凝土具有较好的力学性能和抗渗性能,但抗冻性能尚需进一步研究和提高.     

不等时距GM(1,1)模型预测地基沉降研究

分别采用直线插值、三次样条插值、BP神经网络3种方法,用M ATLAB语言编制程序将不等时距序列转化为等时距序列,采用灰色理论预测沉降.由于BP神经网络强大的非线性映射功能,可以避免常规插值法所造成的一系列误差.实际工程应用结果表明,利用直线插值、三次样条插值和BP神经网络与灰色理论联合建模所得的预测值与实测值的最大相对误差分别为17.2%,5.9%和4.6%.由此可见BP神经网络和灰色理论联合建立的GM(1,1)模型用于预测路基沉降最为精确.     

DESIGN OF A DIGITAL SIGNATURE SCHEME BASED ON FACTORING AND DISCRETE LOGARITHMS

Objective Focusing on the security problem of authentication and confidentiality in the context of computer networks, a digital signature scheme was proposed based on the public key cryptosystem. Methods Firstly,the course of digital signature based on the public key cryptosystem was given. Then, RSA and ELGamal schemes were described respectively. They were the basis of the proposed scheme. Generalized ELGamal type signature schemes were listed. After comparing with each other, one scheme, whose Signature equation was (m r)x=j s modФ(p) , was adopted in the designing. Results Based on two well-known cryptographic assumptions, the factorization and the discrete logarithms, a digital signature scheme was presented. It must be required that s“ was not equal to p‘q“ in the signing procedure, because attackers could forge the signatures with high probabilities if the discrete logarithms modulo a large prime were solvable. The variable public key “e“ is used instead of the invariable parameter “3“ in Ham‘s signature scheme to enhance the security. One generalized ELGamal type scheme made the proposed scheme escape one multiplicative inverse operation in the signing procedure and one modular exponentiation in the verification procedure.Conclusion The presented scheme obtains the security that Harn‘s scheme was originally claimed. It is secure if the factorization and the discrete logarithms are simultaneously unsolvable.     

基于Moldflow的仪表面罩熔接线验证与结构优化

建立了分析模型,应用Moldflow软件对仪表面罩进行了注塑仿真分析。分析结果表明了熔接线位置,将其与实际零件熔接线缺陷进行了对比验证;同时从仪表面罩结构设计角度提出了可行性解决方案,并总结了在零件结构设计过程中导致熔接线缺陷的关键要素。对比验证结果表明:模流分析能有效指导优化仪表面罩结构,从而减少零件试模次数,提升零件质量,降低制造成本,缩短设计周期。     

地铁客车重要零部件转向架轴端吊耳螺栓脱落故障分析及解决措施

地铁客车运营时转向架轴箱体端部与吊耳的连接螺栓脱落严重威胁着地铁的安全行车.通过对脱落螺栓的形貌分析、材质检验及断口金相检测,基本排除了螺栓质量问题,但发现吊耳与其连接件间存在相对滑动的可能性;在EN13749标准规定的轴箱振动加速度以及线路实测振动加速度载荷的分别作用下,基于VDI 2230-2003标准对吊耳的连接螺栓进行强度分析,结果表明:两种载荷作用下螺栓强度均满足要求,但在线路实测载荷下连接螺栓的被连接件间的防滑移安全系数仅为0.997,同时疲劳工况下的安全系数也相对较低;接着,考虑到吊耳结构重量直接决定着连接螺栓的承载大小,提出新型吊耳结构,其重量仅为原结构重量的35％,一阶固有频率为原结构的1.3倍.同时,建议采用10.9级的法兰面螺栓M12mm×100mm作为吊耳连接螺栓,并配合使用宽边NordLock防松垫圈.