降低感应电机直接转矩控制的转矩脉动的控制器

基于磁滞比较器和选择表的感应电机直接转矩控制(DTC),其开关频率可变,且转矩脉动大,特别在低速时.这是因为转矩和磁通的变化率以及转矩和磁通达到其上带和下带所花的时间随运行工况变化.文中提出了一种新型的开关频率固定的转矩控制器.新型控制器结构非常简单,其输出类似于传统的三点式磁滞比较器.就提出的控制器介绍了近似频域分析法,作为控制器参数选择的指南.介绍了感应电机直接转矩控制采用该转矩控制器进行的仿真和实验结果.结果表明提出的控制器可以保持开关频率恒定,并降低了转矩脉动,尤其在低速时.     

Construction of a stochastic model of track geometry irregularities and validation through experimental measurements of dynamic loading

This paper describes the construction of a stochastic model of urban railway track geometry irregularities, based on experimental data. The considered irregularities are track gauge, superelevation, horizontal and vertical curvatures. They are modelled as random fields whose statistical properties are extracted from a large set of on-track measurements of the geometry of an urban railway network. About 300–1000 terms are used in the Karhunen–Loève/Polynomial Chaos expansions to represent the random fields with appropriate accuracy. The construction of the random fields is then validated by comparing on-track measurements of the contact forces and numerical dynamics simulations for different operational conditions (train velocity and car load) and horizontal layouts (alignment, curve). The dynamics simulations are performed both with and without randomly generated geometrical irregularities for the track. The power spectrum densities obtained from the dynamics simulations with the model of geometrical irregularities compare extremely well with those obtained from the experimental contact forces. Without irregularities, the spectrum is 10–50?dB too low.     

Customer loads of two-wheeled vehicles

Customer usage profiles are the most unknown influences in vehicle design targets and they play an important role in durability analysis. This publication presents a customer load acquisition system for two-wheeled vehicles that utilises the vehicle's onboard signals. A road slope estimator was developed to reveal the unknown slope resistance force with the help of a linear Kalman filter. Furthermore, an automated mass estimator was developed to consider the correct vehicle loading. The mass estimation is performed by an extended Kalman filter. Finally, a model-based wheel force calculation was derived, which is based on the superposition of forces calculated from measured onboard signals. The calculated wheel forces were validated by measurements with wheel–load transducers through the comparison of rainflow matrices. The calculated wheel forces correspond with the measured wheel forces in terms of both quality and quantity. The proposed methods can be used to gather field data for improved vehicle design loads.     

Combined effect of boost pressure and injection timing on the performance and combustion of CNG in a DI spark ignition engine

There is an increasing interest in supercharging spark ignition engines operating on CNG (compressed natural gas) mainly due to its superior knock resisting properties. However, there is a penalty in volumetric efficiency when directly injecting the gaseous fuel at early and partial injection timings. The present work reports the combined effects of a small boost pressure and injection timing on performance and combustion of CNG fueled DI (direct injection) engine. The experimental tests were carried out on a 4-stroke DI spark ignition engine with a compression ratio of 14. Early injection timing, when inlet valves are still open (at 300°BTDC), and partial injection timing, in which part of the injection occurs after the inlet valves are closed (at 180°BTDC), were varied at each operating speed with variation of the boost pressure from 2.5 to 10 kPa. A narrow angle injector (NAI) was used to increase the mixing rate at engine speeds between 2000 and 5000 rpm. Similar experiments were conducted on a naturally aspirated engine and the results were then compared with that of the boosting system to examine the combined effects of boost pressure and injection timing. It was observed that boost pressure above 7.5 kPa resulted in an improvement of performance and combustion of CNG DI engine at all operating speeds. This was manifested in the faster heat release rates and mass fraction burned that in turn improved combustion efficiency of the boosting system. An increased in cylinder pressure and temperature was also observed with boost pressure compared to naturally aspirated engine. Moreover, the combustion duration was reduced due to concentration of the heat release near to the top dead center as the result of the boost pressure. Supercharging was also found to reduce the penalty of volumetric efficiency at both the simulated port and partial injection timings.     

Donor states and donee states: investigating geographic redistribution of the US federal-aid highway program 1974–2008

In 2009, the US government spent more than $42 billion on the federal-aid highway program. Most of this money was raised from motor vehicle taxes, whose proceeds are deposited in the highway trust fund. Federal motor vehicle user taxes flow into the fund and aid expenditures flow out from it to build and maintain highways and other transportation infrastructure. With so much money at stake it should be no surprise that expenditure decisions are the subject of intense political debate. Chief among these debates is the conflict between donor states, whose residents pay more in highway user taxes than the state receives in federal highway aid and donee states, whose residents pay less in highway user taxes than the state receives in highway aid. While this geographic redistribution has been masked recently by infusions of general fund revenue into the trust fund, the debate nevertheless continues. This paper attempts to understand why some states are donors and others are donees by simultaneously testing four hypotheses about the geographic redistribution of federal highway dollars that relate to a state’s highway need, economic condition, level of urbanization, and representation on the key Congressional oversight committees. The analyses show that redistribution does not favor states with larger highway systems, more highway use, or lower median incomes, all of which are different indicators of need. Instead, states that are less urban and better represented on the four key Congressional committees generally benefit from redistribution. These findings indicate that the user tax revenues are not used in places where they are most needed. Thus they provide little empirical support for any compelling policy argument for continued geographic redistribution of federal highway user tax dollars.     

Assessing economic activity in coastal areas: A shift‐share approach

Abstract

An essential aspect of economic analysis associated with planning efforts is identifying the composition of existing economic activity and understanding historical trends in economic change. The shift‐share model is a useful and inexpensive tool for this purpose. Shift‐share analysis evaluates changes in local economic activities relative to changes in a reference area (usually the state or nation). Economic change is separated into a reference area component, an industry mix component, and a local share component. These measure, respectively, the effect on the local economy due to changes in the reference area, factors specific to the local mix of industries, and the changing competitive position of the local area relative to the reference area.

A shift‐share analysis of Florida's coastal counties reveals that all grew much faster over the 1965–1975 period than did the national economy. This rapid growth is primarily a result of a net shift of economic activity toward the study area relative to the nation. However, a few coastal counties did exhibit a mix of slow‐growing industries. Specific industry results for Florida counties at the eighty‐industry level reveal that many industries showed significant shifts toward Florida's coastal counties. The performance of individual industries in the coastal counties generally exceeded that of the same industries in noncoastal counties.     

Rural speed limit changes and safety

There is little information in the literature on the relation between rural speed and safety. The wide variation in rural speed limits that are applied in different countries tends to confirm that this relation is poorly understood. The changes in fatal, injury and all accidents that followed a change in the rural speed limit in seven countries were regressed against the change in vehicle mean speed. The results showed that speed significantly affects safety and that within certain limits the relation is linear. The regressions indicated that a 1 km/h reduction in speed will reduce all severities of accidents by between 4 and 5%. It is suggested that part of this reduction is due to a change in economic factors.     

A system for determining economic loss associated with estuary degradation

Abstract

This article suggests a method of estimating economic losses for estuary‐dependent faunal species under conditions whereby the impact of a given degrading development on a particular estuary has a significant degree of uncertainty associated with it. The approach draws on standard theories from a variety of disciplines to provide an operational procedure capable of joint application by biologists, economists, and other related disciplines with working responsibility in the subject area. Consideration is given to probability estimation of possible impacts, sensitivity to underlying assumptions, and decisional safety under conditions of uncertainty. Applied results are demonstrated in a simulation of a negative developmental impact on the estuary‐dependent salmon resources of the Fraser River in British Columbia.     

Considering “Coastal Carbon” in Existing U.S. Federal Statutes and Policies

Coastal ecosystems such as mangroves, salt marshes, and seagrasses provide important ecosystem services, including nursery habitat for fish, shoreline protection, and the recently recognized service of carbon sequestration and storage. When these wetland ecosystems are degraded or destroyed, the carbon can be released to the atmosphere, where it adds to the concentration of greenhouses gases (GHGs) that contribute to climate change. Many federal statutes and policies specifically require that impacts on ecosystem services be considered in policy implementation. Yet, no federal statute, regulation, or policy accounts directly for the carbon held in coastal habitats. There are a number of federal statutes and policies for which coastal carbon ecosystem services could reasonably be added to environmental and ecosystem considerations already implemented. We look at a subset of these statutes and policies to illustrate how coastal carbon ecosystem services and values might affect the implementation and outcomes of such statutes generally. We identify key steps for the inclusion of the ecosystem services of coastal habitats into the implementation of existing federal policies without statutory changes; doing so would increase the degree to which these policies consider the full economic and ecological impacts of policy actions.     

Open registry tanker operations: a comparative cost analysis

The pull of economic gravity on traditional tanker operators towards open registries has been caused primarily by the need to be cost‐competitive in a market which itself is competitive. By using transcendental logarithmic cost functions to model the cost structures of open and traditional tanker operations, this study highlights the general structure of the production technology of tanker services, the cost differentials between the two flag groupings and provides insights into the comparative statics effects of their production functions in the form of elasticities of factor substitution and demand, and scale economies.