Simulation of flow in diesel particulate filter system using metal fiber filter media

Metal fiber is introduced as a new filter media in wall-flow Diesel Particulate Filter (DPF) system. This technology has high temperature durability which is required for filter regeneration, and can maintain the mechanical strength even in the extreme exhaust-related vibrations of vehicles. However, the regeneration near the wall (outer layer) is more difficult because of the heat loss and reduced gas flow near the wall. In this study, a flow is simulated to determine the flow control method for the more uniform flow in all filter layer. By using Star CCM+ commercial software, we obtain local velocity, streamline, and pressure distributions in the filter, which are typically difficult to obtain from measurements. The major control factors are the filter porosity, size and location of the distribution plate, and the number of blades of the swirler. By placing the distribution plate in front of the filter, the flow velocity near the wall was increased. The optimum location and size of the flat plate were chosen. By attaching the blade on the plate the flow velocity near the wall was increased more. Therefore, the regeneration efficiency is increased by using the swirler-type metal fiber DPF system.     

热带海洋大气中的3004铝和∝铜的原电池反应(英文)

The galvanic corrosion behaviour of aluminium 3004-∝brass with different area ratios was studied in the tropical marine atmosphere at Tuticorin harbour over a period of 426 days. The area ratios, viz. A Aluminium:A∝ brass, studied were 0.125, 0.25, 0.5, 1, 2, 4 and 8. The galvanic corrosion behaviour of the metals was studied in terms of the relative increase in the corrosion rate of aluminium due to galvanic coupling with ∝ brass, the relative decrease in the corrosion rate of ∝ brass due to galvanic coupling with aluminium, and the susceptibility of aluminium to pitting owing to galvanic coupling with ∝ brass. The galvanic potential and galvanic current of the system were monitored. Pits of different dimensions ranging from mild etchings to perforations were experienced on the borders and the surfaces of the interface of aluminium in contact with ∝ brass. The corrosion products resulting from galvanic corrosion were analysed using XRD and the pitting on aluminium as a result of galvanic corrosion was highlighted in terms of pit depth, size and density of pit, using a high resolution microscope. The most favourable area ratio of aluminium-∝ brass in marine atmosphere in terms of gravimetric corrosion rate is 8:1 and the most unfavourable area ratio of aluminium-∝ brass is 1:4.     

Construction Risk Management for Deep Excavation Adjacent to In operation Bored Tunnels

营运中的盾构隧道在邻近施工时周围地盘的应力可能因扰动而重新分布,使得盾构隧道暴露在因变形或位移衍生的结构损坏或营运中断等高风险下。为降低相关风险发生的可能性或后果的严重性,高雄计划将高雄车站段地下化工程捷运-R11永久站施工纳入风险管理,通过风险辨识、分析、评估以及以监测、巡检及沟通为基础的风险追踪查核等手段执行风险管理。依本计划执行成果,位于基地两侧营运中的盾构隧道在永久站主体工程开挖施工期间,各项风险均受到妥善的追踪、管控及处置。     

TBM掘进数据标准化预处理方法研究北大核心CSCD

TBM信息化采集了海量数据,对TBM数据的标准化预处理是进行诸多研究的前提。基于此,提出了一种TBM掘进数据标准化处理方法,依托TBM现场施工掘进大数据,以破岩特征为依据选取基本掘进参数(刀盘转速、推进速度、刀盘推力及刀盘扭矩)分析掘进过程TBM数据特点,提出循环掘进过程空推段、上升段、稳定段及下降段起点的判别方法,对稳定段起点提出了标准差法判别方法、均值判别方法、直方图判别方法,满足实时和非实时的数据划分需求。最后对两个TBM工程的数据进行标准化预处理,实现施工大数据的标准化。结果表明,提出的标准化预处理方法可实现循环掘进过程数据的有效划分。研究成果可推广应用于众多TBM工程的数据标准化处理,有效实现机器学习数据库的建立。     

Analysis of a regenerative braking system for Hybrid Electric Vehicles using an Electro-Mechanical Brake

The regenerative braking system of the Hybrid Electric Vehicle (HEV) is a key technology that can improve fuel efficiency by 20∼50%, depending on motor size. In the regenerative braking system, the electronically controlled brake subsystem that directs the braking forces into four wheels independently is indispensable. This technology is currently found in the Electronic Stability Program (ESP) and in Vehicle Dynamic Control (VDC). As braking technologies progress toward brake-by-wire systems, the development of Electro-Mechanical Brake (EMB) systems will be very important in the improvement of both fuel consumption and vehicle safety. This paper investigates the modeling and simulation of EMB systems for HEVs. The HEV powertrain was modeled to include the internal combustion engine, electric motor, battery and transmission. The performance simulation for the regenerative braking system of the HEV was performed using MATLAB/Simulink. The control performance of the EMB system was evaluated via the simulation of the regenerative braking of the HEV during various driving conditions.     

Grain refinement in bearing steels using a double-quenching heat-treatment process

A double-quenching (D/Q) process is proposed for heat-treating high carbon-chromium bearing steels to improve the fatigue properties through refinement of the microstructure. The new heat treatment method has two steps: The first step is a nitrocarburizing process that results in high surface hardness and lowers the transformation temperature. The second step is the same as in the conventional quenching process but can be conducted at a considerably lower temperature than in conventional quenching. The microstructure in the material that is caused by the D/Q heat treatment is much finer than in the conventional Q/T (quenching and tempering) process. In order to quantify the performance of the proposed heat-treatment process, various mechanical property tests are carried out. The rolling contact fatigue life of double-quenched bearing steels was eight times higher than in bearing steels that were treated by conventional Q/T.     

Model-based analysis of the mechanical subsystem of an air brake system

Most commercial vehicles such as buses and trucks use an air brake system, often equipped with an S-cam drum brake, to reduce their speed and/or to stop. With a drum brake system, the clearance between the brake shoe/pad and the brake drum may increase because of various reasons such as wearing of the brake shoe and/or brake drum and drum expansion caused by high heat generation during the braking process. Hence, to ensure proper functioning of the brake system, it is essential that the clearance between the brake shoe and the brake drum is monitored. In this paper, we present a mathematical model for the mechanical subsystem of the air brake system that can be used to monitor this clearance. This mathematical model correlates the push rod stroke transients and the brake chamber pressure transients. A kinematic analysis and a dynamic analysis of the mechanical subsystem of the air brake system were performed, and the results are corroborated with experimental data.     

LEISHMANIA PROMASTIGOTES EVADE INTERLEUKIN 12 INDUCTION BY MACROPHAGES AND STIMULATE A BROAD RANGE OF CYTOKINES FROM CD_（4）~（＋

ＬＥＩＳＨＭＡＮＩＡＰＲＯＭＡＳＴＩＧＯＴＥＳＥＶＡＤＥＩＮＴＥＲＬＥＵＫＩＮ１２ＩＮＤＵＣＴＩＯＮＢＹＭＡＣＲＯＰＨＡＧＥＳＡＮＤＳＴＩＭＵＬＡＴＥＡＢＲＯＡＤ　ＲＡＮＧＥＯＦＣＹＴＯＫＩＮＥＳＦＲＯＭ　ＣＤ_（４）~（＋）ＴＣＥＬＬＳＤＵＲＩＮＧＩ...     

Development and Evaluation of Vehicle Simulation Models for a 4WS Application

In the scope of the European Prometheus project a passenger car with active rear wheel steering was developed by TNO in cooperation with PSA. During development and engineering of the rear wheel steering system simulation tools have been used to reduce development costs. This paper describes the evaluation of different simulation models, from simple to complex, with results of full vehicle driving tests. The optimal balance for model complexity and accuracy was achieved with a 2-dimensional model with an added roll degree of freedom. The results show that validation using time responses can give ambiguous and inaccurate results, and that frequency response functions are much more usable in validation.     

Numerical Simulation of Vehicle Behavior during Straight Line Keeping on Undulating Road Surfaces

Numerical design of vehicles having optimal straight line stability on undulating road surfaces requires an accurate vehicle model based on knowledge of the relevant phenomena. Therefore, vehicle behavior on undulating straight roads has been analyzed and modeled. Measurements on a flat road surface have shown that the dedicated vehicle model yields accurate simulation results of the steering response to medium steering wheel angle inputs. In addition, the model has been validated by measuring two vehicle responses during normal driving on an undulating straight road: viz. the responses to the small steering wheel angle input and to the input by the global inclination of the road surface.