Development of hydrogen-compressed natural gas blend engine for heavy duty vehicles

Natural gas fuel, as an alternative energy source of transportation, has been used widely since it has an advantage of low emission levels. However, new technologies are required in order to meet the reinforced emission regulations. For this purpose, research into the development of hydrogen-compressed natural gas (HCNG) blend engine was carried out to evaluate its feasibility and emission characteristics. The Engine Research Department at the Korea Institute of Machinery and Materials carried out a large number of tests based on various parameter changes that could affect the performance and emission of HCNG engine in different operating conditions. An earlier stage of the research project focused on the lean combustion of a HCNG engine for heavy duty vehicles to meet the EURO-VI standards. An 11-L/6-cylinder CNG engine was used for the test. The effects of the excess air ratio change were assessed based on various content ratios of hydrogen in the natural gas fuel. In the later part of the HCNG research, a stoichiometric mixture operation was suggested to meet reinforced emission regulation without requiring a De-NOx system. Additionally, an exhaust gas recirculation (EGR) system was introduced for the purpose of improving thermal efficiency and durability. The optimal operating conditions were selected to achieve the best thermal efficiency to meet the required emission levels. In this paper, we demonstrate that a HCNG engine can achieve a significant decrease in NOx emissions, as compared to that of a CNG engine, while meeting the requirements of the EURO-VI standards during a transient mode cycle test. EGR can suppress the weakness of stoichiometric mixture combustion strategy, such as the deterioration of the durability and thermal efficiency, while the emission level can be lowered with the use of a three-way catalyst. The possibility of further reduction of emissions and CO2 with EGR was evaluated to access practical application of a HCNG engine in the field. From that evaluation, the HCNG engine with stoichiometric mixture operation for heavy duty vehicles was developed. The emission levels of HCNG engine were 50 % lower when compared to the EURO-VI standards with a greater than 10 % decrease in CO₂ compared to that of a natural gas engine.     

The impact of route guidance,departure time advice and alternative routes on door-to-door travel time reliability: Two data-driven assessment methods

ABSTRACT

Conventional travel time reliability assessment has evolved from road segments to the route level. However, a connection between origin and destination usually consists of multiple routes, thereby providing the option to choose. Having alternatives can compensate for the deterioration of a single route; therefore, this study assesses the reliability and quality of the aggregate of the route set of an origin-destination (OD) pair. This paper proposes two aggregation methods for analyzing the reliability of travel times on the OD level: 1) an adapted Logsum method and 2) a route choice model. The first method analyzes reliability from a network perspective and the second method is based on the reliability as perceived by a traveler choosing his route from the available alternatives. A case study using detailed data on actual travel times illustrates both methods and shows the impact of having variable departure times and the impact of information strategies on travel time reliability.     

集装箱船船首外飘砰击及其对运营可靠性的影响

关于船首区域“砰击”的见解，似乎普遍认为是船长使船在波浪中减速的正当理由，而很少认为船长如何正确判断某一给定情况下的严重性。对船壳板和船首楼的结构损伤，与集装箱、集装箱中装载货物有关绑扎问题对安全的威胁，以及船员对船舶瞬变特征感到不舒适等，对于一艘集装箱船而言都是相关连的问题。     

Theoretical and experimental analysis of a CNG cylinder rack connection to a bus roof

From our perspective, a global technology development should be focused on resolving the issues of environmental impact and conservation of available natural energy resources. New technological solutions and alternative fuels, such as Compressed Natural Gas (CNG), have increasingly more application for modern engines and vehicles. If we take into account the situation in city transport, where primarily vehicles with diesel engines are used, a strategic proposal is to begin by retrofitting these into bi-fuel or dedicated Natural Gas Vehicles (NGVs). This paper analyzes the retrofit of a diesel bus into dedicated NGV. To confirm the safety of the vehicle in city transport, we addressed the problem of mounting a gas rack with CNG cylinders on the roof of a retrofitted city bus, according to UN ECE Regulation No. 110. This assembly is the most critical part of the retrofitted bus because of the concentration of stress due to increased mass and the application of a specific installation for supply of CNG from the cylinders to the engine. These regulations must be met in all parts of the vehicle, but we only focused on those areas affected by the retrofit to NGV.     

Long-term behavior of particulate matters at urban roadside and background locations in Seoul,Korea

The concentrations of particulate matter, PM_2.5, PM₁₀, and TSP at an urban roadside and an urban background station are analyzed. Data collected over a 10 year period are analyzed. The concentrations of the particulates measured at the urban site are systematically larger than at the background station. The mean PM values at the former also exhibit a slight fall over the decade unlike those at the background station. Overall, the particulate matters at both locations are in an intermediate range of global level, e.g., approximately two times lower than those in other Asian regions but higher than in Europe.     

Statistical characterization of surfaces of corroded steel plates

The statistical characteristics of corroded steel plate surfaces exposed to marine environments are of interest for assessing longer term structural safety and integrity using probabilistic methods. This requires information about the variability of corrosion loss and pitting over surfaces. The present paper reports on the observed statistical character of the surfaces of 10 large (1.2 m × 0.8 m × 3 mm thick) steel plates exposed in temperate climate marine immersion, tidal and splash zones for 2.5 years. For the analysis the plates were cut into smaller segments that were mechanically scanned to obtain digitised surface topographies. These were then analysed to estimate the correlation structure and the standard deviation of the surface topography. Considerable differences were found for these and for the mean corrosion loss between different exposure zones. For any one segment the surface topography was found to be highly statistically dependent, implying that smaller coupon sizes can provide adequate estimates of corrosion loss. From this it may be inferred that the deepest pits are not statistically independent as commonly assumed in extreme value statistical representations.     

Historic Monuments Threatened by Coastal Hazards at Boca do Rio,Algarve, Portugal

The coastal stretch of Boca do Rio, western Algarve, Portugal, is experiencing shoreline retreat. Roman ruins are located along the beach section of the coast, and a 17th-century fort is positioned over the cliff section. Both historic monuments are being destroyed by erosion but need to be protected due to their heritage status. Aerial photograph analysis was used to define the evolution of the coast for the period 1945–2001. Shoreline retreat of 0.3 m/year was measured for the sandy coast and 14 mass movements in the cliff face were identified. Considering the rate and style of shoreline evolution, several types of management scenario were evaluated, with the favored measures being the removal of the Roman ruins to a museum and the relocation of the fort inland.     

A review of Australian traffic system design models

The demands for traffic infrastructure are increasing. Yet over the last decade investment in new infrastructure has decreased at all levels. Traffic systems designers are, therefore, being asked to be more accurate in their prediction of the impacts of changes, to analyse ever more complex situations and to extract more from the existing traffic system. This paper reviews developments in techniques for analysing the impacts of changes in the traffic system. It looks at intersection, route, network, parking lot and public transport design models that have been developed in Australia. Particular emphasis is given to the considerable developments in microcomputers and graphics and the impact these are having on the models. Future developments are also discussed.     

半无限惯性表面产生的波浪散射问题研究的另一种方法(英文)

A new method to solve the boundary value problem arising in the study of scattering of two-dimensional surface water waves by a discontinuity in the surface boundary conditions is presented in this paper. The discontinuity arises due to the floating of two semi-infinite inertial surfaces of different surface densities. Applying Green’s second identity to the potential functions and appropriate Green’s functions, this problem is reduced to solving two coupled Fredholm integral equations with regular kernels. The solutions to these integral equations are used to determine the reflection and the transmission coefficients. The results for the reflection coefficient are presented graphically and are compared to those obtained earlier using other research methods. It is observed from the graphs that the results computed from the present analysis match exactly with the previous results.