Egg production and associated losses of carbon, nitrogen and fatty acids from maternal biomass in Calanus finmarchicus before the spring bloom

We present concurrent data on ingestion, egg production and the loss of maternal biomass in pre-spring bloom female Calanus finmarchicus incubated under conditions representative of those in situ in the North Atlantic. A balanced metabolic budget was constructed and used to examine the relative importance of ingestion and biomass for fuelling egg production during the incubations. Ingested carbon was not sufficient to meet the observed demands for egg production. More than 80% of the carbon utilised by the females was instead derived from their biomass. Fatty acid analysis demonstrated that the storage reserves, 20:1 (n−9) and 22:1 (n−11), were virtually absent before experimentation began, and therefore could not have been used to supply the carbon required for egg production during the incubations. The C:N mass-specific ratio of the biomass utilised was 4.1, suggesting that the females had instead catabolised protein in order to meet their metabolic demands. These results suggest that C. finmarchicus adopts a sacrificial reproductive strategy when food availability is low.     

New method for predicting full-scale power performance of pumpjet propulsion system based on statistical learning北大核心CSCD

[目的]针对“适配于螺旋桨的船尾线型+泵喷推进器”构成的船舶泵喷推进系统,提出一种基于统计学习的实船快速性预报新方法。[方法]以某大型水面船舶泵喷推进系统为对象,通过神经网络学习典型推进泵的推力系数图谱曲线,综合运用船-桨配合时的K_(T)-J曲线和船体-喷泵配合时的推力特性曲线,建立“仅需船舶阻力曲线就能实现船舶泵喷推进系统实船快速性预报”的新方法,并基于船模阻力试验、泵喷模型敞水试验及船体-泵喷自航试验的测量换算结果对实船推进性能的预报结果开展精度校验。[结果]校验结果表明:在航速18~30 kn范围内,船舶泵喷推进系统的自航转速、推力和功率的预报误差可控制在5.4%以内,其中设计航速附近的误差甚至小于2%;船体-泵喷的相互作用程度介于船-桨与船体-喷泵之间且幅值相对较小,推力减额系数为趋向于0的极小值,故船舶泵喷推进系统是介于桨轴推进系统和喷水推进系统之间的产物。[结论]该预报方法有利于提升船舶泵喷推进系统实船快速性预报的能力,可为新型舰艇泵类推进系统总体设计/研究提供参考。     

单向复合材料高应变率下材料特性的研究

在船舶领域,复合材料及夹芯复合材料板梁结构已大量应用在舰船结构中,尤其游艇及复合材料高速艇上.在运行过程中,这些结构有时很可能会受到如砰击、碰撞等动态载荷或高速冲击载荷.然而到目前为止,大多数的结构设计所用到的材料特性仍基于低应变率情况下的准静态测试结果.该文研究了高速艇等结构中的纤维增强复合材料高应变率情况下的材料特性,通过引入一种粘弹性模型来模拟并分析研究对象.并在世界先进的INSTRON高应变率材料试验机上设计并完成了相关试验,验证了该枯弹性模型、确定了模型中的材料参数.该粘弹性模型然后被用来研究分析应变率对单向复合材料机械特性的影响.     

Second-order perturbation added mass fluctuation on vertical vibration of tension leg platforms

Total motion in waves can be considered as a superposition of the motion of the body in still water and the forces on the restrained body. In this study the effect of added mass fluctuation on vertical vibration of tension leg platforms (TLP) in the case of vibration in still water for both free and forced vibration subjected to axial load at the top of the leg is presented. This effect is more important when the amplitude of vibration is large. Also this is important in fatigue life study of tethers. The structural model used here is very simple. Perturbation method is used to formulate and solve the problem. First- and second-order perturbations are used to solve the free and forced vibrations, respectively.     

Development of Green-Naghdi models with a wave-absorbing beach for nonlinear, irregular wave propagation

Two-dimensional and three-dimensional Green-Naghdi (GN) models equipped with a numerical wave-absorbing beach have been developed to simulate nonlinear, regular, and irregular wave propagation. The numerical beach is introduced near the downstream boundary to absorb outgoing waves. An appropriate amount of numerical damping and an appropriate length of numerical beach are investigated using numerical experiments. The results show that the GN models with a numerical beach work very well in simulating wave propagation in water in a small computational domain.     

激光堆焊工艺在修造领域的应用现状及发展趋势

本文详细阐述了激光堆焊工艺在工业修造领域的应用现状及发展趋势,介绍了激光束的能源、输送和聚焦系统、堆焊材料及激光设备。重点说明了其在修造领域的应用工艺。     

Damage detection in offshore structures using neural networks

This paper discusses the damage detection in offshore jacket platforms subjected to random loads using a combined method of random decrement signature and neural networks. The random decrement technique is used to extract the free decay of the structure from its online response while the structure is in service. The free decay and its time derivative are used as input for a neural network. The output of the neural network is used as an index for damage detection. It has been shown that function N is effective in damage detection in the members of an offshore structure. Experimental studies conducted on a reduced model for a real jacket structure with geometrical scale of 1:30 are used. The applied loads were random loads. Two different load spectra were used: White noise, and Pierson-Moskowitz.     

Roll-on/roll-off semi-trailer models: a comparison of results

A comparison is made of the various mathematical models that have been constructed, over the past 15 years, of a semi-trailer that can be carried on roll-on/roll-off ships, and some results from five of the models developed by the author are given. The purpose of this comparison is to show that even in the absence of reliable experimental evidence, there is such good agreement between the models that the results from each of them can be relied upon. Problems resulting from large lashing loads and deck loads are highlighted, and it is suggested that the present codes which govern the way semi-trailers are secured on board ship need further scrutiny. Received: January 28, 2000 / Accepted: December 6, 2000     

Transient design waves for green-water loading on bulk carriers

The wave surface profiles associated with extreme relative motion between a slender stationary vessel and the adjacent wave surface are investigated for long-crested head seas. The methodology is based upon an established statistical relationship for a Gaussian random process which indi-cates that in the vicinity of an extreme event the most probable shape of the time history approaches that of the autocorrelation function. Attention is given to the relative motion at a longitudinal position which is representative of the No. 1 hatch cover location on a bulk carrier. Second-order corrections to the wave surface profiles are used to provide estimates of nonlinear relative motions. It is shown that extreme relative motion at the hatch cover location is associated with the vessel encountering a steep-fronted wave with pronounced asymmetry in the horizontal and vertical directions. In order to evaluate the exceedence probabilities, it is hypothesized that the peaks of the nonlinear relative motions are closely correlated with the peaks of an underlying linear process. The overall methodology is applied to an investigation of relative motion exceedence probabilities for vessel lengths of 250 m and 300 m over a range of survival seastates. Received: July, 1999 / Accepted: November, 1999     

A user‐resource planning framework for offshore recreational artificial reefs

Abstract

Artificial reefs have been used extensively in coastal waters to attract and enhance recreational fishery resources. In the United States, they have been traditionally built from “materials of opportunity”; using limited budgets. This paper explores some past planning philosophies and presents a recent artificial reef deployment case that demonstrates a lack of sensitivity to local and regional recreational demand. A systems framework is developed to guide future planning efforts in artificial reef development. The framework is intended to integrate previously fragmented knowledge and to demonstrate the interdisciplinary nature of artificial reef planning. Emphasis is given to advance planning, user dimensions, and the integral issue of reef access.