The adaptation of the Polish shipping companies to market conditions

At the end of the eighties, fundamental changes took place in Polish shipping. Implementation of the market economy system was at first demonstrated in the introduction of the principles of self-dependence, self-government and self-financing of the shipping companies. Privatization performed a key role in the program of transformation of the centrally planned system into market oriented financially independent shipping organizations. The previous principle of the necessary participation of the home fleet in transporting domestic sea-borne trade has been mostly replaced by cross-trade. Many shipping services have left its basic ports in the country for a West European basis, securing alimentation of home and transit cargoes by feeder–service systems. Joint stock companies in shipping with substantial shares of foreign capital are welcomed, and the previously obligatory system of administrative methods of the state monopoly has been abolished. The principles of shipping policy represented in the past by Poland and also by UNCTAD in the 1960s have lost their impact and must be change and adapted to the new demands of the shipping markets.     

Air pollution impact of maritime shipping operations in the port of Houston

Abstract

Major air pollutants from maritime shipping operations are sulfur oxides, nitrogen oxides, and particulate matter emissions from combustion of fuel oil during cruise, berth, and start‐up modes. Sulfur oxides emissions are substantial from steamships burning high‐sulfur residual fuel oil, where shipping contributes 66 percent of the total sulfur dioxide emissions from transportation sources, and almost 3 percent of the total for Harris county, Texas. Nitrogen oxides emissions are significant during cruise conditions for both steamships and motor ships, while particulate emissions are substantial during start‐up and tube cleaning.

Significant marine air pollutant emission sources are found in busy harbor areas such as the Houston Ship Channel. Offshore terminals for unloading large tankers may result in emissions of 10 to 20 tons of sulfur oxides daily per ship, and 3 to 5 tons of nitrogen oxides daily per ship during pumping operations. Trace‐metal constituents present in the oil may catalyze sulfur dioxide and nitrogen dioxide oxidation to their respective sulfate and nitrate aerosols in the humid Texas Gulf Coast atmospheres to aggravate photochemical air pollution problems once the air masses reach industrial and populated urban areas on land. Onshore sulfur dioxide and particulate‐matter emission controls may be necessary for some large ships in port to minimize potential impact on coastal zone air quality.     

Competitive strategies and organizational performance in ship management

Ship management has been characterized by strong competition that resulted in structural changes in the industry, with the bigger companies merging or acquiring smaller ones in an effort to remain competitive. Competitiveness, however, may also be attained through the formulation and implementation of competitive business strategies that will improve performance. The aim of this paper has been to empirically examine the competitive strategy-performance relationship in the context of ship management companies. The findings suggest that there is a positive relationship between pursuing competitive strategies and company performance in ship management. Companies that apply competitive strategies are more likely to be high performers. The strongest influences on performance seem to be achieving economies of scale, differentiation (in particular through a wider range of services offered) and market-focus and competitor-analysis. It is suggested that high performers are more likely to pursue a combination of the generic strategies rather than pursuing one of the generic strategies in isolation.     

12毫米厚铝合金板的搅拌摩擦焊研究(英文)

Most of the investigations regarding friction stir welding(FSW)of aluminum alloy plates have been limited to about 5 to 6mm thick plates.In prior work conducted the various aspects concerning the process parameters and the FSW tool geometry were studied utilizing friction stir welding of 12 mm thick commercial grade aluminum alloy.Two different simple-tomanufacture tool geometries were used.The effect of varying welding parameters and dwell time of FSW tool on mechanical properties and weld quality was examined.It was observed that in order to achieve a defect free welding on such thick aluminum alloy plates,tool having trapezoidal pin geometry was suitable.Adequate tensile strength and ductility can be achieved utilizing a combination of high tool rotational speed of about 2000 r/min and low speed of welding around 28 mm/min.At very low and high dwell time the ductility of welded joints are reduced significantly.     

Study on rail corrugation of a metro tangential track with Cologne-egg type fasteners

In Chinese metro lines, rail corrugation on both tangential and tight curved tracks with Cologne-egg type fasteners is very severe. Based on the viewpoint of friction-induced vibration causing rail corrugation, the rail corrugation on a tangential track with Cologne-egg type fasteners is studied in this paper. A vibration model of an elastic multiple-wheelset-track system with Cologne-egg type fasteners is established. Both the complex eigenvalue analysis and the transient dynamic analysis are performed to study the stability and the dynamic performance of the wheelset-track system. The simulation results show that a low rail support stiffness value is responsible for rail corrugation on the tangential track. When the Cologne-egg fasteners characterised by a lower stiffness value are replaced with the DTVI2 fasteners characterised by a higher stiffness value, rail corrugation disappears. However, rail corrugation on tight curved tracks cannot be suppressed using the same replacement. The above conclusions are consistent with the corrugation occurrences in actual metro tracks.     

Vehicle distance estimation using a mono-camera for FCW/AEB systems

For robust vision-based forward collision warning (FCW) and autonomous emergency braking (AEB) systems, not only reliable detection performance including high detection rate and low false positives but also accurate measurement output of a target vehicle is required. Especially, in order to reduce false alarm or activation of FCW/AEB systems, the systems require the precise measurement output of a target object, such as position, velocity, acceleration, and time-to-collision (TTC). In this study, we developed a measurement estimation algorithm of a target vehicle using a monocular camera. This method estimates two cases of vehicle widths for a target vehicle by using the detected lane information and a pin-hole camera model. After that, the position, velocity, acceleration, and TTC of a target vehicle are estimated by using a Kalman filter for the each estimated vehicle width. To improve robustness, the both estimation results using the detected lane information and the pinhole camera model are fused. This estimation algorithm was evaluated and compared with the state-of-the-art technology. As a result, the proposed measurement output estimation method can improve the performance of the FCW/AEB systems.     

Spatial differentiation,transport demands and transport model design in Kuwait

Foreign consultants still provide much of the analytical expertise for transport planning studies conducted in the Gulf States and other rapidly developing countries. Most of the systems analysis techniques used are adaptations of those developed for western urban areas. The populations of the Gulf States are unique in that they contain very large populations of foreign workers who have very different social and economic characteristics from the national populations. This paper describes these differences and shows how they have influenced the spatial evolution of the Kuwait metropolitan area and the associated transport demands. The paper also describes the analytical tools that are most appropriate for capturing the transport behaviour of residents of the Kuwait metropolitan area.     

Developing a comprehensive programme for improving shipboard energy efficiency

This article identifies a set of fuel saving strategies designed to meet the needs of vessel owners and operators, and describes how the strategies can be combined into a comprehensive programme. The strategies are developed from over sixty potential fuel saving measures grouped on the basis of commonness of purpose and interdependency. These criteria reflect the finding that implementing certain strategies is a prerequisite to the success of other strategies, and the success of some strategies generates a need to implement other strategies. Operational strategies identified include: developing crew motivation for active participation in energy efficiency improvement programmes; altering ship speeds; reducing auxiliary load on main propulsion plant; improved matching of ship capacities and cargo volume; reducing miles traveled; and maximizing use of electronic navigation and communications aids. Physical plant modification strategies identified include: optimizing for reduced ship speeds; fuel switching, blending and modifying; hydrodynamic improvements to the hull and propeller; and improving thrust.     

Access of landocked and geographically-disadvantaged states to the fisheries resources of the economic exclusion zone (EEZ) under the New Convention on the law of the Sea

Petroleum and related goods account for an enormous share of international maritime trade. For the United States, the world's largest energy consumer, imports of petroleum and related products are a vital connection to foreign suppliers. This paper illustrates cartographically the geographic structure of imports of three major petroleum-related commodities—crude petroleum, refined petroleum products, and natural gas—and their changes in the 1980s. Lorenz curve and Gini coefficient analyses reveal a modest deconcentration of crude petroleum within the US port system, an increasing concentration of petroleum products, and a relatively volatile geography of natural gas imports.     

Exposure of Fauna to Off-Road Vehicle (ORV) Traffic on Sandy Beaches

Driving of off-road vehicles (ORVs) on sandy beaches is common and widespread, but is not universally embraced due to putative environmental impacts on beach biota. For ORVs to impact the beach fauna, traffic areas must overlap with faunal habitat: a fundamental pre-requisite for impact assessments but as yet un-quantified for sandy beaches. Thus, this study quantified the spatial and temporal patterns of ORV traffic on five Australian beaches, and measured the degree to which the distribution of intertidal macro-invertebrates overlaps with traffic zones. Traffic volumes on beaches can be considerable (up to 500 vehicles per day). The position of beach traffic across the beach-face is principally governed by tides and driver behavior. Despite driver education campaigns to the contrary, a considerable fraction of vehicles (16–67%) traverses the soft, upper shore near the foredunes. The majority (65%) of burrowing invertebrate species of the intertidal zone is directly exposed to traffic, save for species inhabiting the swash zone. Because beach traffic presents a formidable management challenge, a fundamental first step in identifying whether ecological impacts are indeed likely, is to assess the potential for spatial and temporal conflict between human pressures (e.g., ORVs) and biological resources (e.g., beach fauna). Although this potential is certainly substantial for sandy shores used by ORVs, the actual ecological impacts on the intertidal fauna can only be predicted in situations where the responses (e.g., direct mortality, behavioral changes) of individual species to beach traffic are known.