Application of digital image correlation method to in-situ dynamic strain measurement

Application of digital image correlation (DIC) method to determination of in-situ dynamic strain is presented in this study. Firstly, an integrative software is programmed based on the DIC algorithms and point-wise least-squares fitting technique. Then, simulated speckle images are generated to study the computational accuracy of this software. The experimental setup and procedures for measuring in-situ dynamic strain through both DIC and strain gauge are proposed. The DIC results are close to those measured by strain gauge. This fact reveals that DIC is a practical and effective tool for in-situ dynamic strain measurement. Finally, the full-field in-situ dynamic strain of another specimen is measured by DIC, and the overall distribution of the strain in the measurement area is clearly shown.     

Uncertainty analysis of value for money assessment for public-private partnership projects

In recent years, private sectors are encouraged to take an active part in franchising of urban infrastructure investments and operations, which promotes the rapid development of public-private partnership (PPP) in infrastructure and public service supply. Value for money (VFM) assessment has been officially proposed to provide a reference for selection of projects planning to adopt PPP. Based on the bottlenecks of VFM application in China and the uncertainties for urban infrastructure PPP projects, a discounted cash flow (DCF) model is established for VFM of infrastructure PPP projects. Then, a Monte Carlo simulation model is established on the basis of uncertainty factors for VFM. Through the analysis of Huai’an trams PPP project, coping strategies of uncertainties for VFM are put forward. Findings of the research may propel the establishment of a complete VFM evaluation system for PPP projects. Key instructional functions of VFM during the process of decision-making can be brought into full play and PPP may develop orderly.     

CT reconstruction with priori MRI images through multi-group datasets expansion

Computed tomography (CT) reconstruction with a well-registered priori magnetic resonance imaging (MRI) image can improve reconstruction results with low-dose CT, because well-registered CT and MRI images have similar structures. However, in clinical settings, the CT image of patients does not always match the priori MRI image because of breathing and movement of patients during CT scanning. To improve the image quality in this case, multi-group datasets expansion is proposed in this paper. In our method, multi-group CT-MRI datasets are formed by expanding CT-MRI datasets. These expanded datasets can also be used by most existing CT-MRI algorithms and improve the reconstructed image quality when the CT image of a patient is not registered with the priori MRI image. In the experiments, we evaluate the performance of the algorithm by using multi-group CT-MRI datasets in several unregistered situations. Experiments show that when the CT and priori MRI images are not registered, the reconstruction results of using multi-group dataset expansion are better than those obtained without using the expansion.     

Fine Mapping of a Deafness Mutation hml on Mouse Chromosome 10

Objective To map a mouse deafness gene.identify the underlying mutation and develop a mouse model for human deafncss.Methods Genetic lindage cross and genome scan wer used to map a novel mutation named hypoplasia of the membranous labyrinth (hml),which causes hearing loss in mutant mice.Results ① hml was mapped on mouse Chr 10 (～43 cM from the centromere) suggests that the homologous human gene is on 12q22--q24, which was defined on the basis of known mouse-human homologies (OMIM,2004). ② This study has generated 25 polymorphic microsateUite markers, placed 3 known human genes in the correct order in a high-resolution mouse map and narrowed the hml candidate gene region to a 500 kb area.     

Shared pilot passage plan and navigational safety during pilotage

Navigating in confined waters with a pilot aboard requires that the pilot’s intention and plan is understood by all present on the bridge. The present study investigates the effect of having a detailed route plan and monitoring it in the context of pilotage. The aim was to see how the presence of a shared pilot passage plan in the Electronic Chart Display and Information System (ECDIS) affects the identification and recovery from navigational errors made by a pilot. Twenty participants, 10 with a shared route plan and 10 without, participated as navigators in a simulator scenario involving pilotage in the Oslofjord. Participants were bachelor students in nautical science. The navigation scenarios involved the intentional error by the pilot just before a predefined way point. Three measurements of relevance to navigational safety were recorded: (1) the time it took the participant to express concern, (2) the time it took the participant to correct the error (‘time to recovery’), and (3) the number of groundings. The study revealed that time to express concern and time to recovery were significantly much shorter for the group with a shared pilot passage plan presented in ECDIS than for the group without such a plan. Providing a bridge team with a shared pilot passage plan in ECDIS during pilotage might improve the ability to identify and correct navigational errors.     

On the observability of the fortnightly cycle of the Tagus estuary turbid plume using MODIS ocean colour images

Using three years (2003 to 2005) of MODIS-Aqua normalized water-leaving radiance at 551 nm this paper shows a fortnightly cycle in the Tagus estuary turbid plume. The Tagus estuary is one of the largest estuaries of the west coast of Europe and is located in the most populated area of Portugal, including the capital Lisbon. The turbid plume has been detected by the backscattering characteristics of the surface waters in the vicinity of the estuary mouth. In fortnightly scales, the turbid plume has smaller dimensions during and after neap tides and higher dimensions during and after spring tides. This is most probably associated with the fortnightly spring–neap tidal cycle and the consequent increase in turbidity inside the estuary during spring tides. During the summer weak spring tides (tidal amplitude approximately 2.5 m) no turbid plume is observed for an entire fortnightly cycle. Outside the summer months, precipitation, river discharge and winds, were found to increase the turbid area, but the fortnightly cycle appears to be superimposed on the large time-scale variability, and present throughout the year.     

A line impedance stabilization network for pulse current injection北大核心CSCD

［Objective］Aiming at the deficiency of the existing line impedance stability network (LISN) in the electromagnetic pulse protection capability, a LISN suitable for the pulse current injection (PCI) test of electrical and electronic equipment is proposed. ［Methods］Aiming at the characteristics of high peak value and fast rise of the pulse current in PCI testing, the circuit structure and physical structure of the LISN are improved on the existing basis through PSpice time-domain and frequency-domain simulation combined with engineering design requirements, thereby giving it good nanosecond pulse protection performance and impedance stability at the same time. Pulse current protection performance test and impedance curve test experiments are then designed and carried out.［Results］The experimental results show that the improved LISN can attenuate the injected pulse current by 60 times, while the error of its impedance curve is less than 5% compared with the Type 5 µH LISN in GJB 151B-2013. ［Conclusions］The proposed LISN has good impedance stability and decoupling ability, and can be used in the PCI testing of electrical and electronic equipment in order to protect the power supply and improve the repeatability of testing. © 2023 Chinese Journal of Ship Research. All rights reserved.     

Trapped Modes in a Three-Layer Fluid

In this work, trapped mode frequencies are computed for a submerged horizontal circular cylinder with the hydrodynamic set-up involving an infinite depth three-layer incompressible fluid with layer-wise different densities. The impermeable cylinder is fully immersed in either the bottom layer or the upper layer. The effect of surface tension at the surface of separation is neglected. In this set-up, there exist three wave numbers: the lowest one on the free surface and the other two on the internal interfaces. For each wave number, there exist two modes for which trapped waves exist. The existence of these trapped modes is shown by numerical evidence. We investigate the variation of these trapped modes subject to change in the depth of the middle layer as well as the submergence depth. We show numerically that two-layer and single-layer results cannot be recovered in the double and single limiting cases of the density ratios tending to unity. The existence of trapped modes shows that in general, a radiation condition for the waves at infinity is insufficient for the uniqueness of the solution of the scattering problem.     

Spectral Wave Modeling in Very Shallow Water at Southern Coast of Caspian Sea

This study evaluates the capability of the Simulating WAves Nearshore (SWAN) wave model (version 41.01) in predicting significant wave height and spectral peak energy content for swell waves in very shallow water of surf zone during depth-induced wave breaking and dissipation. The model results were compared with field measurements at five nearshore stations. The results demonstrated that some breaker index formulations were successful for significant wave height prediction in surf zones. However, an incorrect shape of the energy spectrum and overestimated near spectral peak energy content at shallow water stations were obtained using all of the embedded depth-induced wave breaking formulations in SWAN. The dependent breaker index on relative depth (K_pd) formulation, which was successful in predicting near spectral peak energy content, resulted in an average error of 30%. Finally, this formulation was modified to enhance the model performance in reproducing the spectral peak energy content.     

Improving the coexistence of offshore wind farms and shipping: an international comparison of navigational risk assessment processes

The continued growth and evolution of the offshore wind industry, and the emergence of other novel marine uses such as wave and tidal generators, have upped the ante for spatial planners, as well as consenting and approval authorities in various coastal states. These stakeholders rely on processes such as navigational risk assessments (NRAs) to balance safety and efficiency requirements and to make optimal decisions over use of space. Given the increasingly complex and crowded seascape, however, there are some apprehensions about potential shortcomings in these NRA processes. There is also some concern that these inadequacies may lead to unsafe or inefficient marine spatial use. To understand how NRA processes can be improved further, a literature review is conducted, followed by a survey of respondents who are involved in the planning, consenting and/or approval of offshore wind farms across seven different countries. A summary of the NRA processes in these seven countries is presented, and several shortcomings are identified. Based on the findings of the survey, a list of recommendations is presented to enhance existing NRA processes—and to improve the coexistence of shipping and offshore wind farms (OWFs).