Correlation between automotive CO, HC, NO, and PM emission factors from on-road remote sensing: implications for inspection and maintenance programs

Carbon monoxide (CO), hydrocarbon (HC), and nitrogen oxide (NO) emission factors (EFs) are measured with a commercial vehicle emissions remote sensing system (VERSS) during a large-scale vehicle exhaust emissions study in Las Vegas. Particulate matter (PM) EFs are simultaneously measured for individual vehicles with a newly developed PM-VERSS based on ultraviolet backscatter light detection and ranging (Lidar). The effectiveness of CO and HC EFs as proxy for NO and PM EFs for spark-ignition vehicles is evaluated. Poor correlations were found between EFs for pollutants on an individual vehicle basis indicating that high EFs for one or more pollutants cannot be used as a predictor of high EFs for other pollutants. Stronger functional relationships became evident after averaging the EF data in bins based on rank-order of a single pollutant EF. Low overlap between the highest 10% emitters for CO, HC, NO, and PM was found. These results imply that for an effective reduction of the four pollutants, inspection and maintenance (I/M) programs, including clean screening, should measure all four pollutants individually. Fleet average CO and HC concentrations determined by gaseous VERSS were compared with fleet average CO and HC concentrations measured at low-idle and at high-idle during local I/M tests for spark-ignition vehicles. The fleet average CO concentrations measured by I/M tests at either idle were about half of those measured by remote sensing. The fleet average high-idle HC concentration measured by I/M tests was about half of that measured by VERSS while low-idle I/M and VERSS HC average concentrations were in better agreement. For a typical vehicle trip, most of the fuel is burned during non-idle conditions. I/M measurements collected during idling conditions may not be a good indicator of a vehicle’s potential to be a high emitter. VERSS measurements, when the vehicle is under a load, should more effectively identify high emitting vehicles that have a large contribution to the mobile emissions inventory.     

Non-commuters: the people who walk to work or work at home

The paper focuses on the socioeconomic characteristics of workers at home and those who walk to work and these are compared with commuters (those who travel to work by motorized transportation). Understanding of such characteristics of these people is useful for purposes of designing policies that encourage these forms of "travel" to work, if it is believed desirable for planning or environmental purposes. For example, subsidizing public transportation may also have an impact on the proclivity to work at home or walk to work. Using a large census data set for Israel, separate subsamples are analyzed for heads of household and for their spouses. Metropolitan areas as well as peripheral urbanized areas are analyzed separately. Logit analysis is used to identify those variables that affect the likelihood of different groups of people to walk to work or to work at home.It is shown that walkers to work tend to be lower-income, less-educated people with lower asset ownership rates. Females are overrepresented amongst them, while "high-status" professionals are underrepresented. Workers at home appear to be a more complex group. They tend to have higher levels of education and wealth than commuters, but earn less on average. They include proportionately more females. The likelihood of working at home increases with home size and with ownership of some durable goods. The workers at home may in fact be comprised of two or more differing groups with contrasting characteristics, one higher-income and higher-educated, the other with lower socio-economic indicators. Because they may be a heterogeneous group, development of planning policies to encourage non-vehicle commuting may require different policy tools for the different subgroups.     

Sample size requirements for stated choice experiments

Stated choice (SC) experiments represent the dominant data paradigm in the study of behavioral responses of individuals, households as well as other organizations, yet in the past little has been known about the sample size requirements for models estimated from such data. Traditional orthogonal designs and existing sampling theories does not adequately address the issue and hence researchers have had to resort to simple rules of thumb or ignore the issue and collect samples of arbitrary size, hoping that the sample is sufficiently large enough to produce reliable parameter estimates, or are forced to make assumptions about the data that are unlikely to hold in practice. In this paper, we demonstrate how a recently proposed sample size computation can be used to generate so-called S-efficient designs using prior parameter values to estimate panel mixed multinomial logit models. Sample size requirements for such designs in SC studies are investigated. In a numerical case study is shown that a D-efficient and even more an S-efficient design require a (much) smaller sample size than a random orthogonal design in order to estimate all parameters at the level of statistical significance. Furthermore, it is shown that wide level range has a significant positive influence on the efficiency of the design and therefore on the reliability of the parameter estimates.     

Home-to-work commuting,urban form and potential energy savings: A local scale approach to regional statistics

The link between transport energy consumption and land use patterns has been the focus of a considerable amount of academic works over the past decades. While many empirical researches are backed up with solid statistical techniques, most of them do not fully consider the influence of scale underlying empirical quantitative investigations. Using fine-scale home-to-work commuting data for Wallonia (Belgium), this paper re-evaluates Breheny’s (1995) assertion that urban structure should hold the characteristics of major cities if substantial energy savings are to be achieved. A local scale approach highlights efficient settlements in terms of transport energy consumption not only within major towns, but also within remote rural areas. Furthermore, results suggest that influencing the urban form following local energy efficient examples rather than regional ones could also yield significant gains, without an extreme policy stance of re-urbanisation in major cities.     

Redefining activity types: Who participates in which leisure activity?

This paper analyzes the activity choices of individuals and the links between socio-demographics, daily schedules and activity attributes using a new activity choice framework. Activities are first clustered into groups based on their salient attributes, such as duration, frequency, flexibility, planning times, and number of involved persons, rather than their functional types (work, leisure and household obligations), using a K-means cluster technique. This led to the creation of several new activity groups such as “long, temporally fixed, personally flexible activities”, “short and flexible activities”. These activity groups form the choice set for the mixed logit activity choice modeling structure developed for the leisure activities in the second part of the paper. The model results reveal the significant relationships between socio-demographics, temporal characteristics, and characteristics of the schedules on leisure activity choice. The results demonstrate how changing demographics and other activities in individuals’ schedules may affect the nature of the leisure activities and present the substitution and complimentary effects that these new activity groups have on one another.     

Formal scientific research of traffic collision data utilizing GIS

This paper explores the tenuous link between speeding behavior and accident causation, one that has not been well established in the international literature to date. Taking advantage of established engineering conventions and formulae, we were able to set up an a priori hypothesis suitable for testing. Utilizing this formal scientific method (which GIS researchers have been criticised for not using) we establish a statistical link for this relationship. Our methodology can be used to support all police intervention strategies, including the controversial photo radar systems. The results from our research have been entered into a GIS in order to create a map for spatial display. This map illustrates the relative probability or risk of collision occurrence resulting from speeding at all intersections and interchanges within the scope of the study. It is suggested that this methodology could easily be maintained with periodic updates of data, thus creating a dynamic model from which to monitor traffic safety within the city. Furthermore, this model can be utilized to study specific strategies, allowing for the scrutiny of before, during and after effects. The study area is the entire city of Calgary, Alberta, Canada, and includes all traffic collisions occurring during the year of 1994.     

Intermittent automatic train protection using an infrared system

Automatic train protection (ATP) is a vital part of the signalling system that prevents collisions between trains, especially on densely trafficked lines. Conventionally, ATP uses a transponder to communicate between an onboard train device and a trackside device. In Indonesia, ATP is not yet implemented and all trains are currently operated by drivers. It has now become a necessity to install ATP in Indonesia in order to protect train operations. However, as in many tropical and developing countries there are some environmental problems, especially heavy rain, as well as the theft of trackside equipment that influences performance. Installed trackside devices must therefore meet certain criteria such as low-cost configuration, minimalized devices on the track, ease of maintenance, etc. To address the necessity of ATP and to meet these criteria for trackside devices, we develop ATP using an infrared system. This type of ATP – the intermittent ATP system – consists of onboard devices and infrared sensors as trackside equipment. This approach to ATP offers a cost-effective solution and ensures the safety of train movements.     

An activity-based approach of investigating travel behaviour of older people

The paper presents the results of an investigation on daily activity-travel scheduling behaviour of older people by using an advanced econometric model and a household travel survey, collected in the National Capital Region (NCR) of Canada in 2011. The activity-travel scheduling model considers a dynamic time–space constrained scheduling process. The key contribution of the paper is to reveal daily activity-travel scheduling behaviour through a comprehensive econometric framework. The resulting empirical model reveals many behavioural details. These include the role that income plays in moderating out-of-home time expenditure choices of older people. Older people in the highest and lowest income categories tend to have lower variations in time expenditure choices than those in middle-income categories. Overall, the time expenditure choices become more stable with increasing age, indicating that longer activity durations and lower activity frequency become more prevalent with increasing age. Daily activity type and location choices reveal a clear random utility-maximizing rational behaviour of older people. It is clear that increasing spatial accessibility to various activity locations is a crucial factor in defining daily out-of-home activity participation of older people. It is also clear that the diversity of out-of-home activity type choices reduces with increasing age and older people are more sensitive to auto travel time than to transit or non-motorized travel time.     

Isolating high-priority metro and feeder bus transfers using smart card data

Fixed-rail metro (or ‘subway’) infrastructure is generally unable to provide access to all parts of the city grid. Consequently, feeder bus lines are an integral component of urban mass transit systems. While passengers prefer a seamless transfer between these two distinct transportation services, each service’s operations are subject to a different set of factors that contribute to metro-bus transfer delay. Previous attempts to understand transfer delay were limited by the availability of tools to measure the time and cost associated with passengers’ transfer experience. This paper uses data from smart card systems, an emerging technology that automatically collects passenger trip data, to understand transfer delay. The primary objective of this study is to use smart card data to derive a reproducible methodology that isolates high priority transfer points between the metro system and its feeder-bus systems. The paper outlines a methodology to identify transfer transactions in the smart card dataset, estimate bus headways without the aid of geographic location information, estimate three components of the total transfer time (walking time, waiting time, and delay time), and isolate high-priority transfer pairs. The paper uses smart card data from Nanjing, China as a case study. The results isolate eight high priority metro-bus transfer pairs in the Nanjing metro system and finally, offers several targeted measures to improve transfer efficiency.     

Extending stated choice analysis to recognise agent-specific attribute endogeneity in bilateral group negotiation and choice: a think piece

This paper is a think piece on variations in the structure of stated preference studies when modelling the joint preferences of interacting agents who have the power to influence the attribute levels on offer. The approach proposed is an extension of standard stated choice methods, known as ‘stated endogenous attribute level’ (SEAL) analysis. It allows for interactive agents to adjust attribute levels off a base stated choice specification that are within their control, in an effort to reach agreement in an experimental setting. This accomplishes three goals: (1) the ability to place respondents in an environment that more closely matches interactive settings in which some attribute levels are endogenous to a specific agent, should the modeller wish to capture such behaviour; (2) the improved ability of the modeller to capture the behaviour in such settings, including a greater wealth of information on the related interaction processes, rather than simply outcomes; and (3) the expansion of the set of situations that the modeller can investigate using experimental data.