Measuring the potential for automobile fuel savings in the US: The impact of obesity

High rates of oil consumption and obesity in the US have become important socioeconomic concerns. While these concerns may seem unrelated at first, growing obesity rates in the US increase fuel consumption by adding passenger weight to vehicles. This paper estimates the additional amount of fuel (i.e., gasoline) consumed annually by noncommercial passenger highway vehicles in the US due to passenger overweight and obesity. The mathematical model presented in this paper estimates that as many as one billion additional gallons of gasoline are consumed each year due to overweight and obesity in the US, accounting for up to 0.8% of the fuel consumed by these vehicles annually. This additional fuel consumption causes carbon dioxide emissions of up to 20 billion pounds or more, accounting for up to 0.5% of the annual carbon dioxide emissions in the transportation sector.     

Topological analysis of powertrains for refuse-collecting vehicles based on real routes–Part I: Hybrid hydraulic powertrain

In this two-part paper, a topological analysis of powertrains for refuse-collecting vehicles (RCVs) based on the simulation of different architectures (internal combustion engine, hybrid electric, and hybrid hydraulic) on real routes is proposed. In this first part, a characterization of a standard route is performed, analyzing the average power consumption and the most frequent working points of an internal combustion engine (ICE) in real routes. This information is used to define alternative powertrain architectures. A hybrid hydraulic powertrain architecture is proposed and modelled. The proposed powertrain model is executed using two different control algorithms, with and without predictive strategies, with data obtained from real routes. A calculation engine (an algorithm which runs the vehicle models on real routes), is presented and used for simulations. This calculation engine has been specifically designed to analyze if the different alternative powertrain delivers the same performance of the original ICE. Finally, the overall performance of the different architectures and control strategies are summarized into a fuel and energy consumption table, which will be used in the second part of this paper to compare with the different architectures based on hybrid electric powertrain. The overall performance of the different architectures indicates that the use of a hybrid hydraulic powertrain with simple control laws can reduce the fuel consumption up to a 14 %.     

Optimal scheduling of the flexray static segment based on two-dimensional bin-packing algorithm

FlexRay is a reliable and hard real-time in-vehicle communication protocol that is strongly promoted by car manufacturers as the de facto standard in the automotive domain. The protocol offers both a time-triggered and an eventtriggered architecture. This paper focuses on the optimal scheduling of the time-triggered component of FlexRay known as the static (ST) segment using a two-dimensional bin-packing technique. To maximize the bandwidth utilization in the ST segment, a fast heuristic as well as an efficient integer linear programming approach are proposed. Our methods directly schedule signals into slots including frame packing, according to signal-based data scheduling and the slot/ cycle multiplexing mechanisms presented by the latest version of the FlexRay protocol. The benefits of our proposed methods are demonstrated by extensive experiments on synthetic and an automotive X-by-wire system case study. An additional test case is examined to emphasize the superior performance of the proposed approach relative to that of existing optimal scheduling approaches.     

The commercialization of East European liner shipping: the experience of Poland

This paper will examine the impact of continuous and increasing change in the shipping sector of Eastern Europe with particular reference to the liner sector in Poland one of the more dynamic markets that has emerged since the political, economic and social changes of the late 1980s. Polish Ocean Lines, and in particular POL Levant, a relatively new, commercialized subsidiary operating in the private sector, are taken as case studies to assess the new structures that are emerging in the marketplace.     

Role of filtering and biodeposition by Adamussium colbecki in circulation of organic matter in Terra Nova Bay (Ross Sea, Antarctica)

At Terra Nova Bay, the scallop Adamussium colbecki (Smith, 1902) characterises the soft and hard bottoms from 20 to 80 m depth, constituting large beds and reaching high values of density (50–60 individuals/m²) and biomass (120 g/m² DW soft tissues). To assess its role in the organic matter recycling in the coastal ecosystem, its filtering and biodeposition rates were evaluated in laboratory experiments during the austral summer 1993/94. Filtration rates, measured in a flow-through system, were calculated from the difference in particulate organic carbon (POC), nitrogen (PON) and chlorophyll-a (Chl-a) concentration in inflow and outflow water. Experiments were performed using natural sea water with POC, PON and Chl-a concentrations of about 450 μg/l, 90 μg/l and 2 μg/l, respectively. The biodeposition rate and the biochemical composition of the biodeposits were studied in order to detect how the organic matter is transformed through feeding activity of A. colbecki. At +1°C temperature, the average filtering rate was about 1 l h⁻¹ g⁻¹ (DW soft tissues) in specimens ranging in body mass from 2 to 3 g (DW soft tissues) and 6–7 cm long. The biodeposition rate in 3–8 cm long specimens, ranging from 0.4 to 5.7 g (DW soft tissues), was about 5.65 mg DW/g DW/day, leading to an estimate of Corg flux, through biodeposition by A. colbecki, of about 21 mg C m⁻² day⁻¹ at in situ conditions. Comparison between the biochemical composition of seston and biodeposits shows a decrease of the labile compounds, of the Chl-a/phaeopigments ratio in the biodeposits. The recorded C/N ratio decrease suggests a microbial colonisation in the biodeposits. This study suggests that Adamussium colbecki plays an important role in coupling the material fluxes from the water column to the sea bed, processing about 14% of total Carbon flux from the water column to the sediments, with an assimilation efficiency of 36%.     

A Comparison of Various Computer Simulation Models for Predicting the Directional Responses of Articulated Vehicles

This paper presents the results of a comparative study of the predictions, made using computer simulation models of different levels of complexity, of the directional responses of commercial articulated vehicles in steady-state and lane-change maneuvers. The differences in the predictions obtained using various models are examined and are compared with available experimental data. The objective of this study is to compare the capabilities and limitations of various simulation models for predicting the directional behavior of articulated vehicles.     

Management of coastal eutrophication: Integration of field data, ecosystem-scale simulations and screening models

A hybrid approach for eutrophication assessment in estuarine and coastal ecosystems is presented. The ASSETS screening model (http://www.eutro.org) classifies eutrophication status into five classes: High (better), Good, Moderate, Poor and Bad (worse). This model was applied to a dataset from a shallow coastal barrier island system in southwest Europe (Ria Formosa), with a resulting score of Good. A detailed dynamic model was developed for this ecosystem, and the outputs were used to drive the screening model. Four scenarios were run on the research model: pristine, standard (simulates present loading), half and double the current nutrient loading. The Ria Formosa has a short water residence time and eutrophication symptoms are not apparent in the water column. However, benthic symptoms are expressed as excessive macroalgal growth and strong dissolved oxygen fluctuations in the tide pools. The standard simulation results showed an ASSETS grade identical to the field data application. The application of the screening model to the other scenario outputs showed the responsiveness of ASSETS to changes in pressure, state and response, scoring a grade of High under pristine conditions, Good for half the standard scenario and Moderate for double the present loadings. The use of this hybrid approach allows managers to test the outcome of measures against a set of well-defined metrics for the evaluation of state. It additionally provides a way of testing and improving the pressure component of ASSETS. Sensitivity analysis revealed that sub-sampling the output of the research model at a monthly scale, typical for the acquisition of field data, may significantly affect the outcome of the screening model, by overlooking extreme events such as occasional night-time anoxia in tide pools.     

A game-theoretic analysis of competition among container port hubs: the case of Busan and Shanghai 1

Countries throughout the world, and especially within Asia, are investing heavily in container port infrastructure in the hopes of capturing a larger share of global shipping activity for their economies. Many existing ports are emphasizing developing the capacity to serve as a hub port, building deepwater berths with large terminals to facilitate transfer of containers from feeder ships to mother ships for intercontinental transport. We develop a game-theoretic best response framework for understanding how competitor ports will respond to development at a focus port, and whether the focus port will be able to capture or defend market share by building additional capacity. We apply this model to investment and competition currently occurring between the ports of Busan and Shanghai.     

Analysis of the capabilities of a two-stage turbocharging system to fulfil the US2007 anti-pollution directive for heavy duty diesel engines

This article presents a two-stage turbocharged heavy-duty diesel (HDD) engine designed to fulfil the US2007 anti-pollution directive. This directive imposes very restrictive limits on the NOx and particle emissions of HDD engines. In this work, the possibility of combining particle traps in the exhaust line to reduce soot emissions with very high EGR rates to reduce NOx emissions is considered. This new generation engine implements two-stage turbocharging in order to improve the bsfc when the engine is working on steady conditions as well as to optimize the engine transient response. After carrying out the tests, the results were analyzed and the engine settings were adjusted to maximise its behaviour and minimise pollutant emissions. NOx and soot emission peaks were also analyzed at engine transient conditions in order to keep them under certain levels, and thus maintain the overall pollutant emissions to a level that is as low as possible. In summary, a double-stage turbocharging configuration can greatly improve engine driveability (between 23% and 36% depending on engine speed), while reducing NOx emissions during transient evolution without increasing opacity peaks beyond the stated limits.