Review of empirical and semi-empirical Y factor solutions for cracked welded tubular joints

The practical use of fracture mechanics has been established for use on large turbine and electric generator rotor components used in the atomic power generation and the aircraft industry. Application areas in the offshore industry have also been identified. Fracture mechanics is currently used at the design stage of offshore facilities. It provides the basis for fatigue life prediction, steel selection and tolerance setting on allowable weld imperfections. Fracture mechanics is also used during the operational stage of a structure to make important decisions on inspection scheduling and repair strategies and as a tool for establishing limits on operational conditions. Linear elastic fracture mechanics relies on the use of the stress intensity factor concept. The stress intensity factor is a very important fracture mechanics parameter. Therefore, the accuracy of any fracture mechanics model for the prediction of fatigue crack growth in offshore structures for example will depend very much on the accuracy of the stress intensity factor solution used. Several empirical and semi-empirical solutions have been developed over the years with varying degrees of accuracy. This paper presents a review of some of these methods and attempts to assess their accuracy in predicting Y factors for welded tubular joints by comparing predicted results with experimental data obtained from fatigue tests conducted on large scale welded tubular joints. The experimental results were conducted under simulated service conditions, using a jack-up offshore standard load history (JOSH). A comparison between the experimental and predicted results shows that there may be other factors, which influence fatigue crack growth under variable amplitude conditions. Some of these factors have been identified and discussed in this paper.     

Risk-based maintenance and rehabilitation decisions for transportation infrastructure networks

A method for determining optimal risk-based maintenance and rehabilitation (M&R) policies for transportation infrastructure is presented. The proposed policies guarantee a certain performance level across the network under a predefined level of risk. The long-term model is formulated in the Markov Decision Process framework with risk-averse actions and transitional probabilities describing the uncertainty in the deterioration process. The well known Conditional Value at Risk (CVaR) is used as the measure of risk. The steady-state risk-averse M&R policies are modeled assuming no budget restriction. To address the short-term resource allocation problem, two linear programming models are presented to generate network-level polices with different objectives. While the proposed methodology is general and can be used with any performance indicator, pavement roughness is used for numerical studies and an analytical expression for computing CVaR is derived.     

Social and political implications of new transport technologies

The mechanism of change in society is discussed in terms of power and interest groups, and some of the past changes in transport technology are examined in terms of the degree of threat posed to the established order and the interest groups benefiting from change. On the basis of such a power/benefit model, three of the new transport technologies which have been proposed — “guideway”, “dial‐a‐bus” and “network cab”, are discussed as to their likely social and political acceptability.     

Economic appraisal of European transport projects: The state-of-the-art revisited

Substantial investment has been made at national and European level in transport infrastructure over the past 50 years and is likely to continue in the future. The need to appraise transport projects in economic and social terms has developed alongside this in both scope and complexity. The state-of-the-art in the economic appraisal of transport projects is reviewed, progress is assessed and future challenges are identified. The review addresses the general framework, treatment of major impacts, presentation of outputs and issues such as uncertainty. It draws on national practice in Western European countries, which varies substantially reflecting a range of cultural and economic differences. Some points of commonality exist and the principle of monetizing direct transport impacts is generally accepted. Progress has been made towards the measurement of environmental impacts, but the assessment of the wider impacts remains under-developed. Increased sophistication and complexity has brought increasing data and presentation requirements, where computerized decision support methods have potential. Many challenges exist for the future of appraisal and the review is concluded with a discussion of some key issues. At the heart of these is the continuing debate over the relative roles of national and European government in decision-making and resource allocation.     

Human Impacts on Cable Beach,Broome (Western Australia)

There are concerns that Cable Beach, which is of outstanding natural beauty and a major tourist attraction for Broome and the Kimberley region of northwest Australia, is suffering damage from recreational use, particularly that caused by off-road vehicles. To assess current levels of human impact on the shore and its fauna, the southern-most kilometer of the Beach, covering an area to which vehicles had access and an adjacent area closed to vehicles, was surveyed for human usage and shore crab abundance. Human usage over the recording period was high in the area with high vehicular access. The amount of litter, although considerable, was well below that recorded in some other tourist destinations elsewhere in the world. Burrows of both the ghost crabs Ocypode spp, and the sand bubbler, Scopimera inflata, were less numerous in areas of high vehicle use than those of low use. Both species may be valuable in monitoring human impacts on Cable Beach.     

The impact of a new rapid transit system on traffic on parallel highway facilities

This study analyzes data of traffic crossing San Francisco Bay and passing through the Berkeley Hills via Caldecott Tunnel to determine the effect of the opening in 1974 of the Bay Area Rapid Transit System (BART) transbay line. There was a sudden shift in trend lines in 1974; vehicle volumes dropped, transit patronage jumped, but total person trips in the short run followed roughly the trends of the previous eight years. Since 1974, the growth rate in person trips through the Berkeley Hills appears to have remained about the same, while transbay vehicle and transit traffic have increased at a more rapid rate. The increase in transit patronage is particularly noticeable between the morning and afternoon peaks and probably represents new trips by shoppers and sightseers. Whereas other factors, such as the increase in the price of gasoline between October 1973 and July 1974 may have contributed a little to the sudden change in the long‐range trends in 1974, it is believed that the major cause was the opening of the BART network to transbay travel.

     

The Value of a Spillover Fishery for Spiny Lobsters Around a Marine Reserve in Northern New Zealand

The contribution that Leigh Marine Reserve in northern New Zealand makes to the local spiny lobster fishery was examined by comparing the catch characteristics of Jasus edwardsii around the reserve boundary with those from Coastal Leigh, 0.3-2 km from the reserve, and Little Barrier Island, 22-30 km from the reserve. Seasonal trends were apparent in the reserve catch characteristics, consistent with lobster movements into and out of offshore fishing areas adjacent to the boundary. No significant difference was detected in catch per unit effort (kg.trap haul -1 ) among locations. However, the catch around the marine reserve consisted of fewer but larger lobsters than at Little Barrier Island, while the size and number of lobsters caught per trap haul at Coastal Leigh was intermediate between the other two locations. Catch rates around the reserve were more variable than at the other sites, but on average, the amount of money made per trap haul was similar to Little Barrier Island and Coastal Leigh.     

Theoretical and experimental analysis of a CNG cylinder rack connection to a bus roof

From our perspective, a global technology development should be focused on resolving the issues of environmental impact and conservation of available natural energy resources. New technological solutions and alternative fuels, such as Compressed Natural Gas (CNG), have increasingly more application for modern engines and vehicles. If we take into account the situation in city transport, where primarily vehicles with diesel engines are used, a strategic proposal is to begin by retrofitting these into bi-fuel or dedicated Natural Gas Vehicles (NGVs). This paper analyzes the retrofit of a diesel bus into dedicated NGV. To confirm the safety of the vehicle in city transport, we addressed the problem of mounting a gas rack with CNG cylinders on the roof of a retrofitted city bus, according to UN ECE Regulation No. 110. This assembly is the most critical part of the retrofitted bus because of the concentration of stress due to increased mass and the application of a specific installation for supply of CNG from the cylinders to the engine. These regulations must be met in all parts of the vehicle, but we only focused on those areas affected by the retrofit to NGV.     

Long-term behavior of particulate matters at urban roadside and background locations in Seoul,Korea

The concentrations of particulate matter, PM_2.5, PM₁₀, and TSP at an urban roadside and an urban background station are analyzed. Data collected over a 10 year period are analyzed. The concentrations of the particulates measured at the urban site are systematically larger than at the background station. The mean PM values at the former also exhibit a slight fall over the decade unlike those at the background station. Overall, the particulate matters at both locations are in an intermediate range of global level, e.g., approximately two times lower than those in other Asian regions but higher than in Europe.     

China shipbuilding management challenges in the 1980s

Since the economic reforms in the late 1970s, the shipbuilding industry in China has enjoyed rapid growth. Over the past two decades, many new building contracts have been won and successfully completed. However, some shipyards have also suffered great losses. Basing on their experience in Southern China, the authors examine some of the major challenges that Chinese shipbuilders faced during this transitional period, when the industry ventured into the international market. These challenges are broadly categorized into two areas: (i) external factors, such as inflation and infrastructural support that the shipbuilder had no control over, and (ii) shipbuilding management, which the shipbuilder had to master in order to gain competitive advantage. Suggestions on how these problems could be tackled are discussed.