Dynamic system‐optimal traffic assignment for a city using the continuum modeling approach

This paper presents a continuum dynamic traffic assignment model for a city in which the total cost of the traffic system is minimized: the travelers in the system are organized to choose the route to their destinations that minimizes the total cost of the system. Combined with the objective function, which defines the total cost and constraints such as certain physical and boundary conditions, a continuum model can be formulated as an optimization scheme with a feasible region in the function space. To obtain an admissible locally optimal solution to this problem, we first reformulate the optimization in discrete form and then introduce a heuristic method to solve it. This method converges rapidly with attractive computational cost. Numerical examples are used to demonstrate the effectiveness of the method. Copyright © 2013 John Wiley & Sons, Ltd.     

A review of shipboard large-scale energy storage systems北大核心CSCD

储能系统是船舶中的重要设备,可为各类船舶负荷提供能源。随着电力推进技术的成熟,全电船舶已成为未来船舶设计的主要方向。在此背景下,储能系统将由主要为辅助负荷供能逐步发展到为多类型船舶负荷供能,特别是作为船舶动力系统的重要组成部分与各类船舶主/辅机配合,在满足船舶各类负荷需求的前提下提高船舶的经济/环保特性。功能角色的转变加速了大规模储能系统接入船舶,带来了储能系统的状态估计、能量管理、优化规划等一系列问题。首先,对目前的储能技术进行分类;然后,介绍典型全电船舶的分类方法并指出储能系统的应用场景;最后,提出大容量储能系统接入船舶后带来的若干亟待解决的技术问题,即船舶储能系统分布式控制、船舶储能系统适应性规划与优化,以及船舶储能系统状态评估。所做研究可为未来大规模储能系统在电力化船舶上的应用研究提供参考方向。     

Thermal anaysis of an electric water pump for internal combustion engine vehicles

An electric water pump for engine cooling system has an advantage which particularly in the cold start, the use of the electric water pump saves fuel and leads to a corresponding reduction in emissions. However, the electric water pump for internal combustion engine generates much more heat loss than that for hybrid electric vehicle or electric vehicle since it is operated by electric power of high current and low voltage. In this study, the fluid flow and thermal characteristics of the canned type electric water pump with an inverter integrated has been investigated under the effects of heat generation. The analysis conditions such as outdoor air temperature of 125°C, water pump speed of 6000 rpm, coolant temperature of 106°C and coolant flow rate of 120 L/min were used as a standard condition. Therefore, the thermal performance of the canned type electric water pump’s motor and inverter was evaluated by comparison with that of mechanical seal type. In the motor, the temperature reduced by over 10°C, and in the inverter, the amount of temperature decrease equaled to the maximum temperature difference, about 18.7°C. Also, canned type electric water pumps of variable materials were compared for the evaluation of thermal transfer performance for variable thermal conductivity of a can. The motor and inverter were cooled lower to 42°C at motor and about 40°C at inverter for reasonable selection of can’s thermal conductivity.     

Vibration path analysis and optimal design of the suspension for brake judder reduction

Brake judder is abnormal vibration, which is mainly generated by uneven contact between the brake disc and pad. The abnormal vibration from BTV (Brake Torque Variation) is transferred to the suspension and the steering system during braking. In this paper, judder simulation is carried out using a multi-body dynamic analysis program to analyze the relationship between judder and the transfer mechanism, which consists of the suspension and the steering system. In order to verify the analytical model, test results are compared with the simulation results. A sensitivity analysis is also carried out. In addition, an optimization method is presented for judder reduction, using the design of experiments.     

Improved hot-stamping analysis of tubular boron steel with direct measurement of heat convection coefficient

There are two types of hot-stamping processes, direct and indirect, depending on the sequence of the heating, forming, and quenching steps and the method used for each step. In this study, an indirect hot-stamping process consisting of forming at room temperature, heating, and water quenching was applied to develop a coupled torsion beam axle. The analysis results indicated that the application of the heat convection coefficient is critical in the simulations and must take into account the temperature and specific location in the model to ensure the accuracy of the heating and quenching analysis. The heat convection coefficients used in the analysis were directly measured at various positions of the tube (e.g., outside, inside, and bending region) using thermocouples, and the final values were determined through correlation between the actual tests and numerical analysis. The experimental and simulated final deformed shape and temperature distribution were in good agreement.     

Fatigue life estimation of injection mold core using simulation-based approach

The purpose of this study is to present a simulation-based approach capable of predicting the fatigue life of a mold core with the help of CAE technology based on injection molding simulation, core stress analysis and fatigue life prediction. Injection molding simulation is performed in order to obtain the non-uniform pressure acting on a mold core due to the polymer melt flow during injection molding process. Subsequently, the melt pressure profile is used as loading condition for core stress analysis via one-way coupling technique. The lifetime of a mold core is then predicted by fatigue analysis with stress-life approach. For verification of simulation-based approach to the fatigue life prediction, tests were also performed.     

Impact of SME blended fuel combustion on soot morphological characteristics in a diesel engine

The soot morphological study and NOx emissions of soybean oil methyl ester (SME) in a passenger diesel vehicle were investigated experimentally. The soot morphological characteristics were conducted at various injection pressures, engine speeds and engine loads. Soot sampling and image processing analysis with a scanning electron microscope (SEM) were used to investigate the influence on particulate morphologies. The dimensions of average primary particles and the size of the radius of gyration were gradually decreased as injection pressures increased at all operating engine conditions. The average radius of gyration was increased with increasing engine load, while the average primary particle size decreased. NOx emissions were gradually increased with the increasing injection pressure at all operating engine conditions.     

Development of engine control using the in-cylinder pressure signal in a high speed direct injection diesel engine

Emission regulations are becoming more stringent and remain a principal issue for vehicle manufacturers. Many engine subsystems and control technologies have been introduced to meet the demands of these regulations. For diesel engines, combustion control is one of the most effective approaches for reducing not only engine exhaust emissions but also cylinder-by-cylinder variation. However, the high cost of pressure sensors and the complex engine head design for additional equipment present difficulties for manufacturers. In this paper, cylinder pressure-based engine control logic is introduced for a multi-cylinder high speed direct injection (HSDI) diesel engine. The time for 50% of the mass fraction to be burned (MFB50) and the IMEP are valuable for determining the combustion status. These two in-cylinder quantities are measured and applied to the engine control logic. Fuel injection timing is controlled to adjust the operating MFB50 to the target MFB50 using PID control logic, and the fuel injection quantity is controlled to adjust the measured IMEP to the desired IMEP. The control logic is demonstrated at steady state and during transient conditions and is applied to an NEDC mode test.     

Dynamic analysis of energy storage unit of the hydraulic hybrid vehicle

A new configuration of hydraulic hybrid vehicle (HHV) was presented, which mainly consists of an engine, high-pressure accumulator, lower-pressure reservoir and hydraulic transformer (HT) connected to common pressure rail (CPR), and the working principle of hydraulic hybrid vehicle has been described to extend its energy-regenerated potential. Moreover, the mathematical models of the instantaneous pressure ratio of HT and the characteristic parameters of parallel and series accumulator (i.e. effective volume, specific energy, and charge-discharge efficiency) based on lumped parameters method were built, respectively. The simulation and experimental tests of dynamic characteristics of HT and accumulator were done, the result shows that the theoretical analysis was the same as the experimental results by comparing them in the curve trend, and the series accumulator was much superior to parallel accumulator in terms of pulsation damping of hydraulic transformer, that is the simulation results reasonably and appropriately.