One-dimensional model on fuel penetration in diesel sprays with gas flow

In diesel engine, spray penetration is usually changed by in-cylinder gas flow. Accurate prediction on diesel spray with gas flow is important to the optimal design of diesel fuel injection system. This paper presents a theory investigation focusing on the penetration of diesel spray with gas flow. In order to understand the effect of gas flow on the penetration of diesel spray, a one-dimensional spray model is developed from an idealized diesel spray, which is able to predict the spray behavior under different gas flow conditions. The ambient gas flow is simplified as ideal flow that has only constant flow velocity along x-axial and y-axial directions of spray. The x-axial and y-axial directions are respectively defined as along and vertical spray directions. The main assumption is that the y-axial direction gas flow has no effect on the penetration of spray along x-axial direction. The principles of conservation of mass and momentum are used in the derivation. Momentum of in-cylinder air flow is also taken into consideration. Validation of the model at stable condition is achieved by comparing model predictions with experimental measurements of diesel spray without gas flow from Naber's experiments. Furthermore, CFD simulations on penetration of diesel spray with gas flow were performed with the commercial code AVL-fire. The onedimensional model is validated by the penetration results with gas flow from CFD calculation. Results show that a reasonable estimation of the spray evolution can be obtained for both with and without ambient gas flow conditions.     

Robust inspection technique for detection of flatness defects of oil pans

This paper discusses two different methods for the detection of flatness defects present on the mounting surfaces of oil pans using laser-scanned point clouds. The first method involves registration, which is a widely used method in the field of 3D data inspection: scanned point clouds are registered with CAD data and the iterative closest point (ICP) algorithm is used for further comparison. The second method is our proposed method, a simple yet effective method for measuring the flatness of an oil pan mounting surface. The process is based on the construction of a reference plane on the scanned surface. The oil pan mounting surface is scanned by a 3D laser scanner, obtaining point cloud data that is then further processed to reduce noise. Using this processed data, a reference plane parallel to the direction of the mounting surface is defined at the mean position of the mounting surface. The direction of the reference plane is determined by the normal vector of the mounting surface. Construction of the reference plane is carried out by the singular value decomposition (SVD) technique. The deviation of the surface from the reference plane is measured by calculating the error distance between the points of the surface to the reference plane using the least-squares method.     

Design process to minimize roof surface defects using a flexural function and Finite Element analysis

The appearance and exterior precision of passenger cars aesthetics has become an important factor in the automotive industry. During vehicle assembly, the curvature of the roof can change slightly and create cosmetic defects that affect the exterior appearance. The critical factor causing curvature change on the roof is the thermally driven expansion of an elastomer-based mastic sealer which is applied between the exterior roof panel and support rail during the frame assembly process. Therefore the expansion of the mastic sealer was modeled to predict the curvature change in the roof panel. In order to evaluate the causes and predict the curvature change quantitatively, a Finite Element (FE) simulation of the oven heating and mastic curing was performed. Validation of the simulation model was performed by comparing the local deformation and amount of the curvature change on the roof obtained from the actual process. In order to minimize the curvature change, the Taguchi method was used in conjunction with the FE model where a total of eight factors were chosen to perform a sensitivity analysis. In order to exclude the deformation due to residual stress resulting from the oven process, it was selected as a noise factor. Response was taken as the maximum curvature change calculated by a flexural function which was used to distinguish absolute curvature that is not affected by the horizontal or vertical movement of roof panel. A total of 18 cases were analyzed with length of each sealer, pitch of sealer, and rail location being identified as the most influential factors affecting the curvature change. Using the optimum values, the amount of curvature change in the roof panel was reduced by 12 percent.     

Pressure model based coordinated control of VGT and dual-loop EGR in a diesel engine air-path system

This paper describes a pressure-model-based coordinated control method of a variable geometry turbine (VGT) and dual-loop exhaust gas recirculation (EGR) in a diesel engine air-path system. Conventionally, air fraction or burnt gas fraction states are controlled for the control of dual-loop EGR systems, but fraction control is not practical since sensors for fractions are not available on production engines. In fact, there is still great controversy over how best to select control outputs for dual-loop EGR systems. In this paper, pressure and mass flow states are chosen as control outputs without fraction states considering the availability and reliability of sensors. A coordinated controller based on the simple control-oriented model is designed with practical aspects, which is applicable for simultaneous operations of high pressure (HP) EGR, low pressure (LP) EGR, and VGT. In addition, the controller adopts the method of input-output linearization using back-stepping to solve the chronic problems of conventional pressure-based controllers such as coupling effects between operations of HP EGR, and VGT. The control performance is verified by simulation based on the proven GT-POWER model of a heavy-duty 6000cc diesel engine air-path.     

Experimental study of EGR cooler regeneration aided by oxygen-fed NTP and air-fed NTP

Based on non-thermal plasma (NTP) technology fed by oxygen and air as the gas source respectively, the experimental system of exhaust gas recirculation (EGR) cooler regeneration was built to do a study at different regeneration temperatures. By measuring the concentration of main active substance and CO_x in regeneration process, the influence of temperature on regeneration aided by oxygen-fed NTP and air-fed NTP was investigated. The experimental results indicate that EGR cooler can be regenerated both by air-fed NTP and oxygen-fed NTP at a wide temperature range of 18 °C ～ 300 °C. By comparison of the regeneration with oxygen-fed NTP and air-fed NTP, it can be easily known that the regeneration effect is most remarkable at 150 °C with oxygen-fed NTP and at 120 °C with air-fed NTP. In addition, when the temperature is below 150 °C especially at 120 °C, the regeneration efficiency of air-fed NTP is lower than oxygen-fed NTP, nevertheless, when the temperature is above 150 °C, air-fed NTP has a superiority in regeneration and the higher the temperature is, the more obvious the superiority will be.     

Automobile aerodynamics influenced by airfoil-shaped rear wing

Computational model is developed to analyze aerodynamic loads and flow characteristics for an automobile, when the rear wing is placed above the trunk of the vehicle. The focus is on effects of the rear wing height that is investigated in four different positions. The relative wind incidence angle of the rear wing is equal in all configurations. Hence, the discrepancies in the results are only due to an influence of the rear wing position. Computations are performed by using the Reynolds-averaged Navier-Stokes equations along with the standard k-ε turbulence model and standard wall functions assuming the steady viscous fluid flow. While the lift force is positive (upforce) for the automobile without the rear wing, negative lift force (downforce) is obtained for all configurations with the rear wing in place. At the same time, the rear wing increases the automobile drag that is not favorable with respect to the automobile fuel consumption. However, this drawback is not that significant, as the rear wing considerably benefits the automobile traction and stability. An optimal automobile downforce-to-drag ratio is obtained for the rear wing placed at 39 % of the height between the upper surface of the automobile trunk and the automobile roof. Two characteristic large vortices develop in the automobile wake in configuration without the rear wing. They vanish with the rear wing placed close to the trunk, while they gradually restore with an increase in the wing mounting height.     

Degree of fault isolability and active fault diagnosis for redundantly actuated vehicle system

This paper proposes á degree of fault isolability concept and active fault diagnosis method for redundantly actuated vehicle systems. Fault isolability is a structural property related to system dynamics and composition of actuators and sensors. Existing research on testing fault isolability has involved checking whether the system is isolable, i.e., binary in nature. A continuous value rather than a binary metric is needed to evaluate how isolable a given system fault is based on a specific measurement set. After fault components are isolated, the fault type and magnitude are estimated by analyzing residual vectors. In a redundantly actuated system, the number of controls/actuators is greater than the system mobility. Thus, the control input distribution to achieve a given control objective is not unique. In the case of a fault, the active fault diagnosis system adjusts the control input distribution to diagnose the fault. Thus, much more system information can be identified by additional excitation through a redundantly actuated system, which improves the fault diagnosis performance. Simulation results of a four-wheel independently driven and steered vehicle model validated the proposed degree of fault isolability and the effectiveness of the proposed active fault diagnosis method.     

边界元法在液力变矩器内流场中的应用

本文建立了适用于液力变拒器导轮叶栅内流场流动状态的边界元法计算 模型和计算程序,利用激光测速仪获取边界条件,从而得到了导轮叶松 内部二维速度场。此外,通过与实测值比较,检验了程序的精度。      

ANTIVIRAL TESTS OF METHYLENE BLUE INJECTION ON VZV IN VITRO

Ｍｅｔｈｙｌｅｎｅｂｌｕｅｉｎｊｅｃｔｉｏｎｉｓａｎａｎｔｉ－ｄｏｔｅ．Ｔｈｅｄｏｃｔｏｒｓｏｆｄｅｐａｒｔｍｅｎｔｏｆｄｅｒｍａ－ｔｏｌｏｇｙ,ｃｅｎｔｒａｌｈｏｓｐｉｔａｌ,ＡｎｓｈａｎｃｉｔｙｏｆＬｉａｏｎｉｎｇＰｒｏｖｉｎｃｅａｐｐｌｉｅｄｔ...     

BRIEF HYPOXIA PRECEDING E. COLI BACTEREMIA DOWNREGULATES HEPATIC TNF-α PRODUCTION

Ｅａｒｌｙａｆｔｅｒｇｒａｍ－ｎｅｇａｔｉｖｅｂａｃｔｅｒｅｍｉａ（ＧＮＢ）,ｄｅｆｅｃｔｉｖｅｒｅｇｕｌａｔｉｏｎｏｆｅｎｄｏｔｏｘｉｎ－ｉｎｄｕｃｅｄｉｎｆｌａｍｍａｔｏｒｙｒｅｓｐｏｎｓｅｓｏｆｔｅｎｃｕｌ－ｍｉｎａｔｅｓｉｎｐｒｏｇｒｅｓｓｉ...