Biological Status Assessment of Coral Reefs in Southern Puerto Rico: Supporting Coral Reef Protection Under the U.S. Clean Water Act

Abstract

States and other jurisdictions may protect coral reefs using biological water quality standards outlined by the United States Clean Water Act (CWA). Such protection will require long-term, regional monitoring of the resource using biological indicators and a probability-based sampling design. A 60-station survey targeting nearshore linear coral reef was conducted across southern Puerto Rico in December 2011 to document the status of reef inhabitants using a probabilistic, regional sampling design. The quantity, type and condition of stony corals, fish, gorgonians, and sponges were documented from each station, providing a robust representation of linear reef status and composition across the region. Fish represented 106 unique taxa and stony corals 32 unique taxa. Benthic organisms (stony corals, sponges, and gorgonians) averaged nearly 12 colonies per square meter, more than half of which were gorgonians. Assessment results can be used as a baseline to compare with future regional surveys to quantify change in reef condition over time (trend). Both temporal and spatial changes can be expected after large-scale disturbances like hurricanes Maria and Irma in 2017. The indicators and probabilistic sampling design support the long-term regional monitoring envisioned by the Environmental Protection Agency to implement CWA protections in Puerto Rico and elsewhere.     

Impact of Everyday Weather on Individual Daily Travel Behaviours in Perspective: A Literature Review

Despite the hundreds of billions of dollars being spent on infrastructure development -- from roads, rail and airports to energy extraction and power networks to the Internet -- surprisingly little reliable knowledge exists about the performance of these investments in terms of actual costs, benefits and risks. This paper presents results from the first statistically significant study of cost performance in transport infrastructure projects. The sample used is the largest of its kind, covering 258 projects in 20 nations worth approximately US$90 billion (constant 1995 prices). The paper shows with overwhelming statistical significance that in terms of costs transport infrastructure projects do not perform as promised. The conclusion is tested for different project types, different geographical regions and different historical periods. Substantial cost escalation is the rule rather than the exception. For rail, average cost escalation is 45% (SD=38), for fixed links (tunnels and bridges) it is 34% (62) and for roads 20% (30). Cost escalation appears a global phenomenon, existing across 20 nations on five continents. Cost estimates have not improved and cost escalation not decreased over the past 70 years. Cost estimates used in decision-making for transport infrastructure development are highly, systematically and significantly misleading. Large cost escalations combined with large standard deviations translate into large financial risks. However, such risks are typically ignored or underplayed in decision-making, to the detriment of social and economic welfare.     

Examining the Political and Practical Reality of Bus-based Real Time Passenger Information

Abstract

Enhancing the bus experience through improved information provision is a key element of UK Government transport policy. Real time passenger information (RTPI) is perceived to reassure waiting passengers, to benefit the bus operator through increased revenue and the local authority, by promoting social inclusion and achieving a modal shift. RTPI also provides an important tool for operators by allowing them to monitor services and refine their schedules.

The aim of this paper is to understand the reasons for implementing RTPI in the bus sector, and to determine the key issues impacting on the likely success of such a policy. A case study approach investigates the experiences of two provincial towns in the UK. The paper suggests that, whilst it is unclear whether RTPI has resulted in an increase in bus patronage, it is considered to be most effective when combined as part of a package of measures. It is intended that the findings from the two case studies will reveal lessons of relevance to authorities contemplating the introduction of RTPI.     

The Impact of Urban Freight Transport: A Definition of Sustainability from an Actor's Perspective

Abstract

This paper presents a definition of sustainable urban freight transport (SUFT), based on the existing theories and concepts, and develops an indicator set that describes SUFT. The definition of SUFT makes a categorisation of actions possible which enables actors to select effective strategies towards SUFT. The indicator set consists of two levels: impact indicators – which describe how the urban freight transport violates the principles of sustainability; and performance indicators – which describe different categories determining the characteristics and performance of the urban transport system. A literature study analyses the characteristics determining the performance of actors in the urban freight transport chain. Knowing the current state and improvement potential of the urban freight transport system are prerequisites for defining successful strategies and implementing effective actions.     

A Modeling Framework for Bus Rapid Transit Operations Evaluation and Service Planning

Abstract

In this paper, we present a dynamic traffic assignment-simulation modeling framework (DYNASMART-P) to support the evaluation and planning of Bus Rapid Transit (BRT) services in urban transportation networks. The model represents the different characteristics associated with BRT operations such as: exclusive right-of-way lanes, limited-stop service, signal prioritization at congested intersections, and enhanced bus stops to reduce passenger boarding times. A set of simulation experiments is conducted using the model to study the impact of introducing a hypothetical BRT service in the Knoxville area in the State of Tennessee. In these experiments, the different operational characteristics of BRT are evaluated in terms of potential impact on transit ridership and on the interacting auto traffic. The results illustrate the advantages of BRT for increasing transit ridership and improving overall system performance.     

Approach to functional safety-compliant ECU design for electro-mechanical brake systems

In this paper, we propose a design approach to a functional safety-compliant ECU for an electro-mechanical brake (EMB) control system or an electronic wedge brake (EWB) control system. Brake actuators in a brake-by-wire (BBW) system such as EMB or EWB are characterized by the safety-critical functions which are now executed by using many electric and electronic devices with application software. Based on hazard analysis and risk assessments of the automotive functional safety standard ISO 26262, the proposed EMB control system should be ASIL-D-compliant, which is the highest ASIL level. To this end, a hardware and a software design method is introduced to implement functionl safety-oriented monitoring functions which are based on an asymmetric dual-core architecture with an external watchdog processor. It is shown by using EMB hardware-In-the-Loop-Simulation (HILS) that the proposed ECU design approach is very effective when a hardware fault or software execution faults occur in the EMB ECU, moreover, this functional safety-compliant design can be well combiled with the sensor fault-tolerant control logic.     

Fatigue life prediction of a rubber material based on dynamic crack growth considering shear effect

This paper suggests a fatigue life calculation method (A fatigue life calculation method is suggested) for rubber components based on the dynamic crack growth considering shear effect. Dynamic tearing tests were carried out, and the crack length was measured using an optical microscope to calculate the dynamic crack growth rate which characterizes and determines the fatigue life. The algorithm was numerically implemented in finite element code, ABAQUS standard, by using the user subroutine and applied to several rubber components. In the finite element analysis, deformation mode of an element was classified into tension and shear, and a weighting factor was multiplied to a strain energy density according to the degree of shear strain. Tension and compression of an elliptic dumbbell specimen was simulated in order to verify the material parameters of the suggested fatigue life prediction equation and to enhance the reliability of the algorithm. Finally, the fatigue life of a vehicle suspension bushing was calculated and compared with test. There were good agreements in the failure location and the magnitude of the fatigue life.     

Review on characterization of nano-particle emissions and PM morphology from internal combustion engines: Part 1

This paper is review of the characterization of exhaust particles from state-of-the-art internal combustion engines. We primarily focus on identifying the physical and chemical properties of nano-particles, i.e., the concentration, size distribution, and particulate matter (PM) morphology. Stringent emissions regulations of the Euro 6 and the LEV III require a substantial reduction in the PM emissions from vehicles, and improvements in human health effects. Advances in powertrains with sophisticated engine control strategies and engine after-treatment technologies have significantly improved PM emission levels, motivating the development of new particle measurement instruments and chemical analysis procedures. In this paper, recent research trends are reviewed for physical and chemical PM characterization methods for gasoline and diesel fueled engines under various vehicle certification cycles and real-world driving conditions. The effects of engine technologies, fuels, and engine lubricant oils on exhaust PM morphology and compositions are also discussed.     

Node-based scheduling method for easy migration from CAN to FlexRay in in-vehicle networking systems

As vehicles become more intelligent, in-vehicle networking (IVN) systems such as controller area network (CAN) are essential for the convenience and safety of drivers. To expand the applicability of IVN systems, attention is currently being focused on chassis networking systems that require increased network capacity and real-time capabilities. FlexRay was developed to replace CAN protocol in chassis networking systems, to remedy the shortage of transmission capacity and unsatisfactory real-time transmission delay of conventional CAN. However, FlexRay network systems require a complex scheduling method, which is a barrier to their implementation as chassis networking systems. In particular, if we want to migrate from a CAN network to a FlexRay network using the well-defined CAN message database, which has been specifically constructed for chassis networking systems by automotive vendors, a new type of scheduling method is necessary to reduce scheduling efforts during the software development process. This paper presents a node-based scheduling method for easy migration from a CAN network to a FlexRay network system. To demonstrate the feasibility of the technique, its performance is evaluated in terms of various software complexity indices.     

Comparison study on characteristics of nano-sized particle number distribution by using condensation particle counter calibrated with spray and soot type particle generation methods

In the year 2011, the Particle Measurement Program (PMP) in Europe started the regulation of the diesel vehicle’s nano-sized particle number density (PN) due to its high degree of harm to the human body. Concretely, the standard level of PN emission was introduced in the Euro 5+ and 6 emissions regulation with a limit (<6.0 × 10¹¹#/km) for diesel light-duty vehicle. Therefore, the determination of suitable and sophisticated instruments for reliable particle sampling and analysis was essential in taking exact experimental data. Now, among the PN emission measuring devices suggested by the PMP, condensation particle counter (CPC) is a key equipment for measuring the particle number density in real time and it has been used extensively. However, CPC can cause different results depending on operating conditions of the saturator and condensation that induce different rates of particle growth. This study was conducted to analyze the effect of CPC calibrated by a two-particle generator with spray and soot type methods applied on the nano-sized particle distribution’s parameters such as number concentration and linearity. Also, in order to ensure the reliability for particle sensor system named as PPS, which had emerged as a useful diagnostic to making spatially and temporally resolved quantitative measurements of diesel PN concentration, it was compared with calibrated CPC system. As a result, nano-sized particle measuring system with CPC calibrated by spray type particle generator had a much higher counting efficiency, indicating a larger nano size available than soot type particle generator. And, comparative experimental results on the correlation between the particle number of CPC to a reflectance PPS system showed that above 5,000 #/cm ³ in number concentrations measured by CPC as well as PPS were found to be similar with good linear relationship.