张江立交改建工程中减少交通影响的对策

该文以张江立交改建工程为背景,分析工程与交通相互影响的各种因素,提出减少交通影响的综合性对策。     

Investigation of the shear flows over a sunroof opening based on a linear inviscid instability analysis

The large-scale shear flows over the sunroof opening of a mid-sized SUV measured using a PIV system were investigated. The shear flows were measured for five different cases of deflector protrusion (one case was the baseline test without deflector) at two different free stream flow velocities below the critical velocity where the buffeting noise level reached a maximum. The structures of the shear flows were observed to differ, apparently depending on whether the radiated buffeting noise is relatively strong or not. For strongly buffeting experimental cases, the momentum thicknesses of the shear layers were observed to grow rapidly and saturated at a station near the downstream edge of the sunroof opening, where the saturation of the transverse velocity fluctuations was also observed, and where the vortex coalescence process was presumably completed. On the other hand, no discrete large-scale vortex structures were observed for none-buffeting or weakly buffeting cases. Streamwise growth of the velocity fluctuations was found to be well predicted by a linear hydrodynamic instability analysis for the strongly buffeting cases. Numerical results obtained from a linear inviscid instability analysis using a hyperbolic tangent mean velocity profile were used to calculate the amplification factors with the initial momentum thickness and the streamwise fluctuation wavenumber. The shear flows were found to form large-scale discrete vortices when the linear inviscid amplification factors exceeded a threshold amplification factor.     

Effects of mixture stratification on HCCI combustion of DME in a rapid compression and expansion machine

Compression ignition of homogeneous charges in internal combustion (IC) engines is expected to offer high efficiency of DI diesel engines without high levels of NOx and particulate emissions. This study is intended to find ways of extending the rich limit of HCCI operation, one of the problems yet to be overcome. Exhaust emissions characteristics are also explored through analyses of the combustion products. DME fuel, either mixed with air before induction or directly injected into the combustion chamber of a rapid compression and expansion machine, is compressed to ignite under various conditions of compression ratio, equivalence ratio, and injection timing. The characteristics of the resulting combustion and exhaust emissions are discussed in terms of the rate of heat release computed from the measured pressure, and the concentrations of THC, CO, and NOx are measured by FT-IR and CLD. The experimental data to date show that operation without knock is possible with mixtures of higher equivalence ratio when DME is directly injected rather than when it is inducted in the form of a perfectly homogeneous fuel-air mixture. Although fuel injected early in the compression stroke promotes homogeneity of the DME-air mixture in the cylinder, it causes the mixture to ignite too early to secure good thermal efficiency and knock-free operation at high loads. Low temperature reactions occur at about 660K regardless of the fueling methods, fuel injection timing and equivalence ratio. The main components of hydrocarbon emissions turned out to be unburned fuel (DME), formaldehyde and methane.     

Effect of fuel injection strategies on the combustion process in a PFI boosted SI engine

A low-cost solution based on fuel injection strategies was investigated to optimize the combustion process in a boosted port fuel injection spark ignition (PFI SI) engine. The goal was to reduce the fuel consumption and pollutant emissions while maintaining performance. The effect of fuel injection was analyzed for the closed and open valve conditions, and the multiple injection strategies (MIS) based on double and triple fuel injection in the open-valve condition. The tests were performed on an optical accessible single-cylinder PFI SI engine equipped with an external boost device. The engine was operated at full load and with a stoichiometric ratio equivalent to that of commercial gasolines. Optical techniques based on 2D-digital imaging were used to follow the flame propagation from the flame kernel to late combustion phase. In particular, the diffusion-controlled flames near the valves and cylinder walls, due to fuel deposition, were studied. In these conditions, the presence of soot was measured by two-color pyrometry, and correlated with engine parameters and exhaust emissions measured by conventional methods. The open valve fuel injection strategies demonstrated better combustion process efficiency than the closed ones. They provided very low soot levels in the combustion chamber and engine exhaust, and a reduction in specific fuel consumption. The multiple injection strategies proved to be the best solution in terms of performance, soot concentration, and fuel consumption.     

Effects of FTP-75 mode vehicle fuel economy improvement due to types of power steering system

This paper focuses on fuel economy improvement according to the type of power steering system. Usually, a conventional power steering system is directly driven by the crankshaft of the engine with a belt, known as HPS (hydraulic power steering). However, there is some inefficiency with this system at high engine speeds. To improve this inefficiency, automobile makers have developed two power steering systems: EHPS (electro-hydraulic power steering) and MDPS (motor-driven power steering) or EPS (electric powered steering). However, there has been insufficient study of effects of the type of power steering system on fuel economy. In this paper, the effect of the type of power steering system on fuel economy is studied experimentally, and calculations of the effect on vehicle fuel economy are presenting using computer simulation with AVL cruise software. The results demonstrate that a 1% vehicle fuel economy improvement can be achieved in a vehicle with an electro-hydraulic power steering system compared to a vehicle with a hydraulic power steering system. In addition, a 1.7% vehicle fuel economy improvement can be achieved using a full electric power steering system in a FTP-75 driving cycle. These results could be used to choose a power steering system.     

Predictive control of a vehicle trajectory using a coupled vector with vehicle velocity and sideslip angle

In this paper, a predictive algorithm for vehicle trajectory control using the vehicle velocity and sideslip angle is proposed. Since the driving state of a vehicle generates nonholonomic constraint equations, it is difficult to control the trajectory with a conventional control algorithm. Furthermore, control vectors such as vehicle velocity and sideslip angle are coupled together; hence, a separate control for each variable is not suitable. In this study, a coupled control vector that combines the velocity and sideslip angle is proposed for the predictive control of vehicle trajectory. Since the coupled control vector is derived from the status of the vehicle’s motion, it is easy to generate a feedback control vector for the predictive controller. The coupled vector cannot be directly used as input to the vehicle systems; therefore, the vehicle input vector should be calculated from the control vector using a nonlinear function. Since nonlinear functions are not inserted in the control loop, they are calculated by the controller. Therefore, this method does not require a linearization process in the control logic, which enhances the stability and accuracy of the predictive controller.     

High speed tensile test of steel sheets for the stress-strain curve at the intermediate strain rate

This paper presents stress-strain curves of steel sheets for an auto-body obtained at intermediate strain rates with a servo-hydraulic type high speed tensile testing machine. The apparatus has the maximum stroke velocity of 7.8 m/sec to obtain the tensile material properties at a strain rate of up to 500/sec. A special jig fixture is specially designed for accurate acquisition of tensile loads with reduction of the load-ringing phenomenon induced by unstable stress wave propagation at high strain rates. Tensile testing of steel sheets for an auto-body was carried out to obtain stress-strain curves of mild steel and advanced high strength steels at strain rates ranged from 1/sec to 200/sec. The test results provide interesting information regarding the stress-strain curves at intermediate strain rates ranged from 1/sec to 200/sec and demonstrate that strain rate hardening is strongly coupled with strain hardening.     

Effects of valve timing and intake flow motion control on combustion and time-resolved HC & NOx formation characteristics

In SI engines, valve events have a major influence on volumetric efficiency, fuel economy and exhaust emissions. Moreover, swirl and tumble motions in the intake charge also improve combustion speed and quality by stratifying the mixture as well as intensifying the mixing rate of air and fuel. This paper investigates the behaviors of an engine and the combustion phenomenon for various intake valve timings and intake charge motions using CVVT system and port masking schemes. Test condition includes a part load and a cold idle condition inclusive of a cold start of the engine. Time-resolved HC and NOx emissions were also measured at an exhaust port to examine their formation mechanisms and behaviors with fast response HC/NOx analyzers. In conclusion, the fast burning of fuel and improved combustion quality by enhanced charge motions reduced unburned HC emissions, and advancing the intake valve opening reduced HC as well as NOx. Furthermore, HCs during the cold transient phase and idle conditions decreased with recalibrated start parameters such as lean air-fuel ratio and spark retardation via the enhancement of intake charge motions.     

Evaluation of a brake assistance system (BAS) using an injury severity prediction model for pedestrians

Through the years, traffic engineers and researchers have developed a variety of countermeasures to enhance pedestrian safety. Pedestrian-vehicle collisions are regarded as the most serious type of accident since they incur high fatality rates. A fundamental concept in developing effective countermeasures is to analyze pedestrian-vehicle collisions scientifically, which can identify the causes of accidents and accident severity. The objective of this study was to investigate the pedestrian safety benefit of the brake assistance system (BAS) and a functional requirement associated with BAS, namely the time needed to safely detect a pedestrian ahead. An injury severity prediction model for pedestrians was developed to systematically evaluate the BAS in this study. Ordered multinomial logistic regression analysis was used to establish a statistical model capable of predicting pedestrian injury severity. In addition to vehicle characteristics, collision speed and pedestrian characteristics were used as independent predictor variables. The outcomes of this study would be useful in directing the development of safety policies and technologies associated with pedestrian safety.     

OH-radical behavior of unsteady lifted flame based on instantaneous change of the equivalence ratio

In an earlier study, the current authors showed that an unsteady-state lifted flame generated by an equivalence ratio conversion system for a given fuel, was similar to a steady-state lifted flame in terms of the change characteristics from a premixed flame to a critical flame and then to a triple flame with a diffusion flame positioned in the middle according to the concentration difference. Therefore, this study used an OH-PLIF method to investigate the characteristics of a steady-state lifted flame and an unsteady-state lifted flame created under conditions identical to the flames in the preceding study. PLIF (Planar laser induced fluorescence) is practically effective for visualizing the concentration fields within a flame. The resulting OH-radical measurements showed that an unsteady-state lifted flame created under the specific conditions used in this study showed similar tendencies in terms of OH-radical distribution, fluorescence intensity, and liftoff height, to a steady-state lifted flame, thereby confirming that the behavior of an unsteady-state lifted flame can be effectively predicted based on the behavior of a steady-state lifted flame.