On the observability of the fortnightly cycle of the Tagus estuary turbid plume using MODIS ocean colour images

Using three years (2003 to 2005) of MODIS-Aqua normalized water-leaving radiance at 551 nm this paper shows a fortnightly cycle in the Tagus estuary turbid plume. The Tagus estuary is one of the largest estuaries of the west coast of Europe and is located in the most populated area of Portugal, including the capital Lisbon. The turbid plume has been detected by the backscattering characteristics of the surface waters in the vicinity of the estuary mouth. In fortnightly scales, the turbid plume has smaller dimensions during and after neap tides and higher dimensions during and after spring tides. This is most probably associated with the fortnightly spring–neap tidal cycle and the consequent increase in turbidity inside the estuary during spring tides. During the summer weak spring tides (tidal amplitude approximately 2.5 m) no turbid plume is observed for an entire fortnightly cycle. Outside the summer months, precipitation, river discharge and winds, were found to increase the turbid area, but the fortnightly cycle appears to be superimposed on the large time-scale variability, and present throughout the year.     

Shared pilot passage plan and navigational safety during pilotage

Navigating in confined waters with a pilot aboard requires that the pilot’s intention and plan is understood by all present on the bridge. The present study investigates the effect of having a detailed route plan and monitoring it in the context of pilotage. The aim was to see how the presence of a shared pilot passage plan in the Electronic Chart Display and Information System (ECDIS) affects the identification and recovery from navigational errors made by a pilot. Twenty participants, 10 with a shared route plan and 10 without, participated as navigators in a simulator scenario involving pilotage in the Oslofjord. Participants were bachelor students in nautical science. The navigation scenarios involved the intentional error by the pilot just before a predefined way point. Three measurements of relevance to navigational safety were recorded: (1) the time it took the participant to express concern, (2) the time it took the participant to correct the error (‘time to recovery’), and (3) the number of groundings. The study revealed that time to express concern and time to recovery were significantly much shorter for the group with a shared pilot passage plan presented in ECDIS than for the group without such a plan. Providing a bridge team with a shared pilot passage plan in ECDIS during pilotage might improve the ability to identify and correct navigational errors.     

Trapped Modes in a Three-Layer Fluid

In this work, trapped mode frequencies are computed for a submerged horizontal circular cylinder with the hydrodynamic set-up involving an infinite depth three-layer incompressible fluid with layer-wise different densities. The impermeable cylinder is fully immersed in either the bottom layer or the upper layer. The effect of surface tension at the surface of separation is neglected. In this set-up, there exist three wave numbers: the lowest one on the free surface and the other two on the internal interfaces. For each wave number, there exist two modes for which trapped waves exist. The existence of these trapped modes is shown by numerical evidence. We investigate the variation of these trapped modes subject to change in the depth of the middle layer as well as the submergence depth. We show numerically that two-layer and single-layer results cannot be recovered in the double and single limiting cases of the density ratios tending to unity. The existence of trapped modes shows that in general, a radiation condition for the waves at infinity is insufficient for the uniqueness of the solution of the scattering problem.     

Spectral Wave Modeling in Very Shallow Water at Southern Coast of Caspian Sea

This study evaluates the capability of the Simulating WAves Nearshore (SWAN) wave model (version 41.01) in predicting significant wave height and spectral peak energy content for swell waves in very shallow water of surf zone during depth-induced wave breaking and dissipation. The model results were compared with field measurements at five nearshore stations. The results demonstrated that some breaker index formulations were successful for significant wave height prediction in surf zones. However, an incorrect shape of the energy spectrum and overestimated near spectral peak energy content at shallow water stations were obtained using all of the embedded depth-induced wave breaking formulations in SWAN. The dependent breaker index on relative depth (K_pd) formulation, which was successful in predicting near spectral peak energy content, resulted in an average error of 30%. Finally, this formulation was modified to enhance the model performance in reproducing the spectral peak energy content.     

Improving the coexistence of offshore wind farms and shipping: an international comparison of navigational risk assessment processes

The continued growth and evolution of the offshore wind industry, and the emergence of other novel marine uses such as wave and tidal generators, have upped the ante for spatial planners, as well as consenting and approval authorities in various coastal states. These stakeholders rely on processes such as navigational risk assessments (NRAs) to balance safety and efficiency requirements and to make optimal decisions over use of space. Given the increasingly complex and crowded seascape, however, there are some apprehensions about potential shortcomings in these NRA processes. There is also some concern that these inadequacies may lead to unsafe or inefficient marine spatial use. To understand how NRA processes can be improved further, a literature review is conducted, followed by a survey of respondents who are involved in the planning, consenting and/or approval of offshore wind farms across seven different countries. A summary of the NRA processes in these seven countries is presented, and several shortcomings are identified. Based on the findings of the survey, a list of recommendations is presented to enhance existing NRA processes—and to improve the coexistence of shipping and offshore wind farms (OWFs).     

A line impedance stabilization network for pulse current injection北大核心CSCD

［Objective］Aiming at the deficiency of the existing line impedance stability network (LISN) in the electromagnetic pulse protection capability, a LISN suitable for the pulse current injection (PCI) test of electrical and electronic equipment is proposed. ［Methods］Aiming at the characteristics of high peak value and fast rise of the pulse current in PCI testing, the circuit structure and physical structure of the LISN are improved on the existing basis through PSpice time-domain and frequency-domain simulation combined with engineering design requirements, thereby giving it good nanosecond pulse protection performance and impedance stability at the same time. Pulse current protection performance test and impedance curve test experiments are then designed and carried out.［Results］The experimental results show that the improved LISN can attenuate the injected pulse current by 60 times, while the error of its impedance curve is less than 5% compared with the Type 5 µH LISN in GJB 151B-2013. ［Conclusions］The proposed LISN has good impedance stability and decoupling ability, and can be used in the PCI testing of electrical and electronic equipment in order to protect the power supply and improve the repeatability of testing. © 2023 Chinese Journal of Ship Research. All rights reserved.     

Investigations of vehicle securing without lashings for Ro-Ro ships

To reduce the area on deck occupied by each car and the labour and time required for lashing and unlashing cars, it has been proposed by the author that in some conditions, cars on decks could be transported without lashing. To evaluate cargo securing based on this “lashing-free” concept, computational code was developed to calculate the vehicle–deck interactions for various ship motions. The code was structured by incorporating a vehicle model into a piece of ship motion calculation code. A series of time-domain simulations were conducted to evaluate vehicle securing. It was found that for a target ship consisting of a 6000-unit Ro-Ro vessel, vehicle securing is mainly influenced by the ship's rolling motions and is highly dependent on the wave height and loading conditions. It was suggested from the analysis that vehicles could be secured without being lashed in a large area of the ship in specific weather conditions and on some routes with less adverse sea states. However, it is still suggested that conventional lashing holes should be constructed on the deck because in severe sea states the cars will still need to be lashed. The limitations of the current investigations are also presented. The relevant research work was carried out at the Division of Ship Design and Engineering, Department of Shipping and Marine Technology, Chalmers University of Technology.     

Exact and simplified estimations for elastic buckling pressures of structural pipe-in-pipe cross sections under external hydrostatic pressure

Structural pipe-in-pipe cross sections have significant potential for application in offshore oil and gas production systems because they combine thermal insulation performance with structural strength and self weight in an integrated way. Such cross sections comprise inner and outer thin-walled pipes with the annulus between them fully filled by a selectable filler material to impart an appropriate combination of properties. Structural pipe-in-pipe cross sections can exhibit several different collapse mechanisms, and the basis of the preferential occurrence of one over the others is of interest. This article presents an exact analysis for predicting the elastic buckling behaviours of a structural pipe-in-pipe cross section when subjected to external hydrostatic pressure. Simplified approximations are also investigated for elastic buckling pressure and mode when the outer pipe and its contact with the filler material is considered as a pipe on an elastic foundation. Results are presented to show the variation of elastic buckling pressure with the relative elastic modulus of the filler and pipe materials, the filler thickness, and the thicknesses of the inner and outer pipes. Case studies based on realistic application scenarios are used to show that the simplified approximations are sufficiently accurate for practical structural design purposes.     

Experimental study on the nonlinear pressure acting on a high-speed vessel in regular waves

It is well known that the hydrodynamic responses of a high-speed vessel traveling in regular head waves of even moderate wave height can show significant nonlinear behavior, and so linear statistical techniques become insufficient for predicting the statistics of responses in irregular waves. On the other hand, it has been shown that an approximate third-order Volterra model is applicable to handling the statistics of some nonlinear seakeeping problems, such as motions and vertical hull girder loads. In the present study, the focus is on the nonlinear behavior of the pressure responses of the hull surface, especially on the pressures acting on alternately wet and dry areas near the waterline and on the bow zone with high deadrise angles that may be subject to slight impact and water pile-up effects. To clarify the validity of applying Volterra modeling to this problem, a series of experiments in regular and irregular head waves were carried out, and approximate third-order and fifth-order Volterra models with the proposed algorithm for finding frequency response functions (FRFs) were applied as a means of validation. In the present article, the first part of the validation was performed using experimental data in regular waves. It was confirmed that the third-order Volterra model has adequate accuracy to simulate deterministically the variation of pressure responses in regular waves of different wave steepness up to a wave amplitude to wavelength ratio of 0.01 even for the highly nonlinear pressures acting on the above-mentioned areas of the hull surface.