Stress sensitivity analysis and optimization of automobile body frame consisting of rectangular tubes

At conceptual design stage, beam element is extensively used to create the frame structure of automobile body, which can not only archive the accurate stiffness but also reduce much computational cost. However, the stress definition of beam element is very complex so that the stress sensitivity and optimization are difficult to analytically derive and numerically program. This paper presents an solution to this problem and an application in the lightweight optimization design of automobile frame. Firstly, maximal Von Mises stress of rectangular tube is calculated by using the superposition of stress, which is together induced by the axial force, bending moments, torsional moment and shear force. Secondly, the sensitivity of Von Mises Stress with respect to size design variables: breadth, height and thickness are derived, respectively. Thirdly, an optimal criterion is constructed by Lagrangian multiplier method to solve the frame optimization with stress constraints. Lastly, numerical example of car frame proves that the proposed method can guarantee the stress of each beam element almost fully reaches at the yielding stress.     

Estimation of maximum road friction coefficient based on Lyapunov method

With the real time and accurate information of motor torque and rotation speed of the four-in-wheel-motordrive electric vehicles, a slip based algorithm for estimating maximum road friction coefficient is designed using Lyapunov stability theory. Modified Burckhardt tire model is used to describe longitudinal slip property of the tire. By introducing a new state variable, a nonlinear estimator is proposed to estimate the longitudinal tire force and the maximum road friction coefficient simultaneously. With the appropriate selection of estimation gain, the convergence of the estimation error of the tire longitudinal force and maximum road friction coefficient is proved through Lyapunov stability analysis. In addition, the error is exponentially stable near the origin. Finally the method is validated with Carsim-Simulink co-simulation and real vehicle tests under multi working conditions in acceleration situation which demonstrate high computational efficiency and accuracy of this method.     

Degree of fault isolability and active fault diagnosis for redundantly actuated vehicle system

This paper proposes á degree of fault isolability concept and active fault diagnosis method for redundantly actuated vehicle systems. Fault isolability is a structural property related to system dynamics and composition of actuators and sensors. Existing research on testing fault isolability has involved checking whether the system is isolable, i.e., binary in nature. A continuous value rather than a binary metric is needed to evaluate how isolable a given system fault is based on a specific measurement set. After fault components are isolated, the fault type and magnitude are estimated by analyzing residual vectors. In a redundantly actuated system, the number of controls/actuators is greater than the system mobility. Thus, the control input distribution to achieve a given control objective is not unique. In the case of a fault, the active fault diagnosis system adjusts the control input distribution to diagnose the fault. Thus, much more system information can be identified by additional excitation through a redundantly actuated system, which improves the fault diagnosis performance. Simulation results of a four-wheel independently driven and steered vehicle model validated the proposed degree of fault isolability and the effectiveness of the proposed active fault diagnosis method.     

不同稳定剂对SBS改性沥青稳定效果的对比研究

通过试验测试不同老化时间样品的针入度、软化点和延度比较其相容性和路用流变学性能指标的变化,分析体系宏观稳定性和稳定剂性能特征,并通过形态结构照片分析稳定剂改善的效果。结果表明,加入稳定剂后改性沥青的高温储存稳定性明显改善,同时加入FD-06无硫稳定剂的改性沥青在热储存过程中性能更加稳定,不易离析。沥青中的部分组份具有化学活性,利用其活性点,引入带有活性基团的反应物,并通过被引入分子的化学结构的调节改善SBS与沥青的相容性,从而制备储存稳定性良好的SBS改性沥青。化学改性技术的应用提高了路用改性沥青的性能/价格比。     

A fundamental investigation of tilt control systems for narrow commuter vehicles

One way of addressing traffic congestion is by efficiently utilizing the existing highway infrastructure. Narrow tilting vehicles that need a reduced width lane can be part of the solution if they can be designed to be safe, stable, and easy to operate. In this paper, a control system that stabilizes the tilt mode of such a vehicle without affecting the handling of the vehicle is proposed. This control system is a combination of two different types of control schemes known as steering tilt control (STC) and direct tilt control (DTC) systems. First, different existing variations of both STC and DTC systems are considered and their shortcomings analysed. Modified control schemes are then suggested to overcome the deficiencies. Then a new method of integrating these two control schemes that guarantees smooth switchover between the controllers as a function of vehicle velocity is proposed. The performance of the proposed STC, DTC, and integrated systems is evaluated by carrying out simulations for different operating conditions and some experimental work. The design of a second-generation narrow tilting vehicle on which the developed control system has been implemented is presented.     

吊拉组合体系预应力连续加劲梁性能分析

按照６ 种不同分跨的设计方案, 每种方案又按照施工阶段采取几种不同预压荷载的计算比较来研究按照预压合龙施工工艺完成体系转换的预应力连续加劲梁吊拉组合体系桥的主梁结构性能, 并选择体系的最优分跨比．     

隧道三维激光扫描测算一体化技术方案与实践北大核心CSCD

三维激光扫描技术已在隧道工程中得到广泛应用,但其内外业脱节、人工操作过多、实时性不足等问题日益凸显。文章结合工程实践,提出三维激光隧道扫描测算一体化技术方案,通过隧道设计模型录入、坐标里程解算、点云自动过滤、点云降采样与地物分离等,对点云进行特征值提取,得到兼顾规模、精度、效率的点云数据模型;通过点云与设计、点云与点云的对比解算,得到隧道工程质量安全相关成果。该技术方案在某铁路隧道工程中进行实践,可将内外业工作总时间缩短至20 min以内,自动化程度高,成果精度好,具有很好的推广价值。     

China shipbuilding management challenges in the 1980s

Since the economic reforms in the late 1970s, the shipbuilding industry in China has enjoyed rapid growth. Over the past two decades, many new building contracts have been won and successfully completed. However, some shipyards have also suffered great losses. Basing on their experience in Southern China, the authors examine some of the major challenges that Chinese shipbuilders faced during this transitional period, when the industry ventured into the international market. These challenges are broadly categorized into two areas: (i) external factors, such as inflation and infrastructural support that the shipbuilder had no control over, and (ii) shipbuilding management, which the shipbuilder had to master in order to gain competitive advantage. Suggestions on how these problems could be tackled are discussed.     

Solution of an unstable inverse problem: wave source evaluation from observation of velocity distribution

This paper illustrates how to estimate a wave source generating a wave system, including local waves, with the assumption of linear dispersive waves of two dimensions. The estimation of wave source is realized by using an inverse problem. Unfortunately, the inverse problem is ill-posed in the sense of stability, since the wave source information included in local waves diminishes as the distance from the wave source increases. In the area of applied mathematics, there are well-developed methods to tackle ill-posed problems, which are called regularizations. In this paper, three different regularizations which are well known in applied mathematics are introduced and investigated to learn whether they are applicable to the present problem of the estimation of wave source. From the numerical experiments, it is shown that the estimation is realized by the regularizations introduced in this study, so that they can be applied to the determination of a wave source generating a wave system including local waves. Received: June 6, 2000 / Accepted: February 7, 2001