A dichotomous choice survey for quantifying option and non-use values of bus services in Korea

The total economic value for a transportation service consists of use, option, and non-use value. The use benefit is based on a traveler’s willingness to pay for usual consumption of the service. The optional value, on the other hand, is related to the possible use of the service for trips not yet anticipated or currently accommodated by other travel modes. The non-use value, however, is derived from the intrinsic merit of the service, even though a trip-maker never actually or potentially depends on the mode. A closed-ended contingent valuation method is considered for the quantification of the option and non-use values. A survey of single- and double-bounded dichotomous choices is conducted with a case study of South Korean bus operations. A logistic regression model and a survival analysis for the single- and double-bounded approaches, respectively, are applied. The estimation result is examined according to the statistical property required and the behavioral validity expected. In particular, three issues from the output are discussed. First, the results help to show the preferable framework between single- and double-bounded surveys for addressing an individual’s option and non-use values. Second, the differences in the absolute values of option and non-use values are compared. Thirdly, the relationship between trip-makers’ willingness to pay and the level of service of their primary travel modes are investigated. In conclusion, the summary of research and the possibilities for future studies are given.     

Dependence of fatigue limit of high-tension bolts on mean stress and ultimate tensile strength

High tension bolts in critical joints in internal combustion engines are susceptible to fatigue failure. Computeraided bolted joint design procedures require knowledge of the dependence of bolt fatigue limit on the mean stress and ultimate tensile strength. This dependence is investigated with staircase fatigue limit tests. The test results show that when the bolt fatigue limit is estimated with the nominal stress of the bolt, it decreases with increasing tensile strength and nominal mean stress. However, there is a range of the nominal mean stress where the bolt fatigue limit is almost constant. The test results are interpreted with finite element analysis.     

Analysis of intended bus usage

In order to plan bus operations, it is necessary for transit planners to understand what factors may influence travelers’ choice of buses for travels within a city. The proposed method involves various scenarios of a hypothetical bus operation which was rated by a group of individuals.

Analysis of Covariance technique is employed to analyze people's sensitivities to their perceived levels of bus service characteristics. The technique involves:

1. testing for the significant effects of varying levels of service characteristics upon people's intentions to use bus service, and

2. assessing differences among various population segments in their sensitivity patterns towards bus service characteristics.

Results from the application of the technique to attitudinal data collected by the Orange County Transit District indicate that bus service characteristics do influence, independently and jointly, respondents’ stated intentions to use buses.

Sensitivity pattern differed across the five homogeneous segments identified in an earlier research based on socioeconomic characteristics.

One segment (an older, predominatly male population segment with higher home ownership level and lower income than the rest of the sample) was relatively insensitive to changes in bus fare and was influenced by changes in headway independent of changes in access distance. Another segment consisting of fewer registered voters with lower education also exhibited similar independent impact of headway and access distance.

The technique is especially useful in reducing a large number of proposed alternative bus systems to a smaller set for further planning considerations by specifying the ranges within which variation of service characteristic would cause substantial changes in the intended usage responses.     

Difference in ship motion and wave load in long and short crested irregular waves北大核心CSCD

[Objective]To investigate ship motion and load responses in realistic 3D waves and overcome the limitations of the traditional 2D wave assumption, this paper develops a method for predicting ship motion and load responses in short-crested waves. [Method]The long- and short-term responses of ship motion and load in long- and short-crested waves are numerically predicted using the spectral analysis and statistical probability methods, respectively. The influence of directional function on ship response is also numerically analyzed. Moreover, tank model tests and a large-scale model sea trial are comparatively conducted to validate the difference between ship response and statistics in long- and short-crested irregular waves. [Results]The results show that when navigating against the waves in the same sea condition, the long-crested wave assumption overestimates the statistical mean value of ship load response, but underestimates extreme load in real seas. For long-crested waves, the ship motion and acceleration power spectrum is concentrated around a certain frequency band. [Conclusion]Ship motion and load responses in realistic 3D waves are significantly different from those in 2D long-crested waves. The directional function of short-crested waves also has a significant effect on ship motion and load responses. © 2023 The Author(s).     

不锈钢车辆的可回收利用性

论述了用于找出不锈钢车辆的可回收利用的 1个现场试验的方法 ,并对几种型式车辆的分解和回收利用的费用进行了比较 ,结果表明 ,不锈钢车辆的回收利用费用是最低的     

Optimization of blending oil with non-esterified biodiesel fuel using design of experiment at partial engine loads

Non-esterified bio-diesel fuel is more economically feasible than esterified one because of simple manufacturing process that only consists of filtering. Applicability of this fuel on diesel engine with electronic control system was tried and accomplished in a previous research. In this study, optimization adopting a fractional factorial design and response surface methodology was carried out at 25 % and 50 % of engine load in order to verify effectiveness of design of experiment for performance optimization of diesel engine. Pcr and IT mainly affected responses as specific fuel oil consumption and nitrogen oxides regardless of engine load according to the fractional factorial design. Estimations were 310.3 g/kWh of specific fuel oil consumption and 237 ppm of nitrogen oxides at 25 % load, and 233.2 g/kWh of specific fuel oil consumption and 730 ppm of nitrogen oxides at 50 % load according to the response surface methodology. As the results of verification tests, specific fuel oil consumption and NOx were respectively 300.4 g/kWh and 277 ppm at 25 % load, and 236.8 g/kWh and 573 ppm at 50 % load. Since there were small differences between estimations and verifications, adopting Box-Behnken method of the response surface methodology for performance optimization of diesel engine should be considered carefully.     

Distributed and self-adaptive vehicle speed estimation in the composite braking case for four-wheel drive hybrid electric car

Considering the controllability and observability of the braking torques of the hub motor, Integrated Starter Generator (ISG), and hydraulic brake for four-wheel drive (4WD) hybrid electric cars, a distributed and self-adaptive vehicle speed estimation algorithm for different braking situations has been proposed by fully utilising the Electronic Stability Program (ESP) sensor signals and multiple powersource signals. Firstly, the simulation platform of a 4WD hybrid electric car was established, which integrates an electronic-hydraulic composited braking system model and its control strategy, a nonlinear seven degrees-of-freedom vehicle dynamics model, and the Burckhardt tyre model. Secondly, combining the braking torque signals with the ESP signals, self-adaptive unscented Kalman sub-filter and main-filter adaptable to the observation noise were, respectively, designed. Thirdly, the fusion rules for the sub-filters and master filter were proposed herein, and the estimation results were compared with the simulated value of a real vehicle speed. Finally, based on the hardware in-the-loop platform and by picking up the regenerative motor torque signals and wheel cylinder pressure signals, the proposed speed estimation algorithm was tested under the case of moderate braking on the highly adhesive road, and the case of Antilock Braking System (ABS) action on the slippery road, as well as the case of ABS action on the icy road. Test results show that the presented vehicle speed estimation algorithm has not only a high precision but also a strong adaptability in the composite braking case.     

Effects of altitude on combustion characteristic during cold start of heavy-duty diesel engine

Altitude has a significant effect on combustion of heavy-duty diesel engines, especially during cold start. An experimental study on a heavy-duty diesel engine operating at different altitudes was conducted. Tests were based on a direct injection (DI) turbocharged diesel engine with intake and exhaust pressure controlled by the plateau simulation test system to stimulate altitude conditions including 0 m, 1000 m, 2000 m, 3000 m and 4000 m. Results indicated that the compression and expansion resistance moment reduced and the speed increased during the cranking period. The peak pressure of several cycles was increased during the start-up period; however, the expansion pressure dropped more and the indicated mean effective pressure (IMEP) reduced as the altitude rose. While at an altitude of over 2000 m, the peak pressure fluctuated obviously during the start-up period. The higher the altitude was, the more the fluctuation amplitude and cycle number increased and combustion instability enhanced, which resulted the start-up period time increasing at high altitude. When the altitude rose, the cycle-to-cycle variation of the peak pressure and speed fluctuation increased during the idle, the ignition and CA50 were delayed and the combustion duration was shortened. The effect of altitude on combustion characteristics of the diesel engine was more significant during the start-up period than during its idle period.     

Pedaling torque sensor-less power assist control of an electric bike via model-based impedance control

This paper proposes a method to assist human force acting on electric bike without using costly torque sensors via a model-based impedance control technique. In general, electric bikes are classified into two categories, i.e., pedelec electric bikes and throttle electric bikes. We focus on the system called a pedelec electric bike. It assists human pedaling force using the pedaling information, e.g., pedaling force or speed. To obtain the human’s pedaling information in real-time, it needs physical sensors such as a torque sensor and a velocity sensor. But, these sensors are expensive and weak against external loads. Also, since these sensors are fixed directly to the forced component in a bike system, there are the risks of damage. For these reasons, sensor-less control methods based on a disturbance observer have been studied so far. In this paper, we have proposed a pedaling torque sensor-less power assist method and have applied it to the experimental pedelec electric bike. A power assist control algorithm, designed by employing an impedance model, consists of a PI-type feedback controller, an inverse model-based feedforward controller, and a pedaling torque observer. Finally, we performed experiments and confirmed the effectiveness of a proposed power assist control method.     

Effect of steady airflow field on drag and downforce

The purpose of this study is to examine the effect of the steady airflow field of a rear spoiler on the coefficients of drag (C_D) and downforce (C_DF). The type of spoiler is suggested as a two-jointed arm model that mimics the flapping flight mechanism of the Canada goose. Computational fluid dynamics (CFD) technique was used for the steady airflow analysis of a vehicle implemented with various spoiler topologies. We evaluated C_D and C_DF due to the three types of airfoils and the five phases of each airfoil. We obtained the following conclusions from the results: (1) We found that the best cases for C_D and C_DF were the case of Phase 5 and symmetry airfoil, and the case of Phase 1 and reverse airfoil, respectively. (2) It is clear that C_D becomes the largest at Phase 1 of the reverse airfoil, since the eddy magnitude at the rear of the vehicle is the largest, and C_DF also becomes the largest during that phase, since the pressure distribution on the upper surface of the spoiler is very large. (3) As Phase 1 moves to Phase 5 in the same type of airfoil, it is advantageous for C_D and disadvantageous for C_DF, respectively.