Impact of Everyday Weather on Individual Daily Travel Behaviours in Perspective: A Literature Review

Despite the hundreds of billions of dollars being spent on infrastructure development -- from roads, rail and airports to energy extraction and power networks to the Internet -- surprisingly little reliable knowledge exists about the performance of these investments in terms of actual costs, benefits and risks. This paper presents results from the first statistically significant study of cost performance in transport infrastructure projects. The sample used is the largest of its kind, covering 258 projects in 20 nations worth approximately US$90 billion (constant 1995 prices). The paper shows with overwhelming statistical significance that in terms of costs transport infrastructure projects do not perform as promised. The conclusion is tested for different project types, different geographical regions and different historical periods. Substantial cost escalation is the rule rather than the exception. For rail, average cost escalation is 45% (SD=38), for fixed links (tunnels and bridges) it is 34% (62) and for roads 20% (30). Cost escalation appears a global phenomenon, existing across 20 nations on five continents. Cost estimates have not improved and cost escalation not decreased over the past 70 years. Cost estimates used in decision-making for transport infrastructure development are highly, systematically and significantly misleading. Large cost escalations combined with large standard deviations translate into large financial risks. However, such risks are typically ignored or underplayed in decision-making, to the detriment of social and economic welfare.     

高铁CRTSⅡ型轨道板生产线预应力损失测试

CRTSⅡ型无砟轨道板的质量是高铁安全运行的重要保证,对施工中预应力张拉的有效控制是保证轨道板施工质量的关键。结合CRTSII型无砟轨道板生产线具体结构形式及预应力损失机理,设计了预应力损失现场测试方案和预应力损失计算方法。实测结果表明CRTSⅡ型无砟轨道板生产线预应力损失不能忽略,应引起重视。     

Examining the Political and Practical Reality of Bus-based Real Time Passenger Information

Abstract

Enhancing the bus experience through improved information provision is a key element of UK Government transport policy. Real time passenger information (RTPI) is perceived to reassure waiting passengers, to benefit the bus operator through increased revenue and the local authority, by promoting social inclusion and achieving a modal shift. RTPI also provides an important tool for operators by allowing them to monitor services and refine their schedules.

The aim of this paper is to understand the reasons for implementing RTPI in the bus sector, and to determine the key issues impacting on the likely success of such a policy. A case study approach investigates the experiences of two provincial towns in the UK. The paper suggests that, whilst it is unclear whether RTPI has resulted in an increase in bus patronage, it is considered to be most effective when combined as part of a package of measures. It is intended that the findings from the two case studies will reveal lessons of relevance to authorities contemplating the introduction of RTPI.     

The Impact of Urban Freight Transport: A Definition of Sustainability from an Actor's Perspective

Abstract

This paper presents a definition of sustainable urban freight transport (SUFT), based on the existing theories and concepts, and develops an indicator set that describes SUFT. The definition of SUFT makes a categorisation of actions possible which enables actors to select effective strategies towards SUFT. The indicator set consists of two levels: impact indicators – which describe how the urban freight transport violates the principles of sustainability; and performance indicators – which describe different categories determining the characteristics and performance of the urban transport system. A literature study analyses the characteristics determining the performance of actors in the urban freight transport chain. Knowing the current state and improvement potential of the urban freight transport system are prerequisites for defining successful strategies and implementing effective actions.     

A Modeling Framework for Bus Rapid Transit Operations Evaluation and Service Planning

Abstract

In this paper, we present a dynamic traffic assignment-simulation modeling framework (DYNASMART-P) to support the evaluation and planning of Bus Rapid Transit (BRT) services in urban transportation networks. The model represents the different characteristics associated with BRT operations such as: exclusive right-of-way lanes, limited-stop service, signal prioritization at congested intersections, and enhanced bus stops to reduce passenger boarding times. A set of simulation experiments is conducted using the model to study the impact of introducing a hypothetical BRT service in the Knoxville area in the State of Tennessee. In these experiments, the different operational characteristics of BRT are evaluated in terms of potential impact on transit ridership and on the interacting auto traffic. The results illustrate the advantages of BRT for increasing transit ridership and improving overall system performance.     

怠速轿车车内显著噪声测试分析与控制

针对某轿车怠速车内噪声高达48 dB(A),比同类竞争车高5 dB(A),并且主观感觉存在共鸣音、严重影响乘坐舒适性的问题,利用噪声控制中的消元法识别噪声源。结果表明,由于管路内压力脉动过大,对管路产生了液压冲击而产生噪声,故该显著噪声的激励源为燃油供给管路。提出在靠近油轨处管路上设置蓄能器(缓冲罐)的措施来控制怠速车内噪声。采取措施后经驾乘人员主观评价,车内噪声消失,听觉感受明显改善。     

纯电动客车的CAN网络系统设计与开发

纯电动（PEV）客车相比于传统客车对整车的网络控制要求更高,其复杂的车载电子电气设备产生的干扰不仅严重影响外界电子设备和系统的正常工作,而且在相互之间也产生电磁干扰,影响自身正常工作。本文对网络设计中的一些关键问题进行研究,以有助于提高网络控制的稳定性和抗干扰性等。     

Node-based scheduling method for easy migration from CAN to FlexRay in in-vehicle networking systems

As vehicles become more intelligent, in-vehicle networking (IVN) systems such as controller area network (CAN) are essential for the convenience and safety of drivers. To expand the applicability of IVN systems, attention is currently being focused on chassis networking systems that require increased network capacity and real-time capabilities. FlexRay was developed to replace CAN protocol in chassis networking systems, to remedy the shortage of transmission capacity and unsatisfactory real-time transmission delay of conventional CAN. However, FlexRay network systems require a complex scheduling method, which is a barrier to their implementation as chassis networking systems. In particular, if we want to migrate from a CAN network to a FlexRay network using the well-defined CAN message database, which has been specifically constructed for chassis networking systems by automotive vendors, a new type of scheduling method is necessary to reduce scheduling efforts during the software development process. This paper presents a node-based scheduling method for easy migration from a CAN network to a FlexRay network system. To demonstrate the feasibility of the technique, its performance is evaluated in terms of various software complexity indices.     

Urea-SCR system optimization with various combinations of mixer types and decomposition pipe lengths

The demand for NO_x after-treatment system has increased dramatically due to the stricter NO_x emission regulations for diesel vehicles. The urea-SCR system is one of the NO_x after-treatment methods found to be quite effective to meet the regulation requirement enforced by various authorities including the Euro-6. In order to develop an effective urea-SCR system, it is critical to establish an even distribution of reductant over the catalyst surface since this favorable distribution can increase reduction reaction and in turn, improve NO_x conversion efficiencies. In the current study, a number of design variations of the urea-SCR system which included two mixer types and three decomposition pipe lengths, were evaluated systematically using CFD analysis and experimental measurements. The purpose of the CFD analysis was to estimate the distribution of reductant within the urea-SCR system with a specific configuration and the purpose of the engine emission test was to measure the amount of NO_x reduction, respectively. The results from the systematic analysis revealed the relation between the reductant distribution over the SCR and the performance of the NO_x reduction.     

Simulation of flow in diesel particulate filter system using metal fiber filter media

Metal fiber is introduced as a new filter media in wall-flow Diesel Particulate Filter (DPF) system. This technology has high temperature durability which is required for filter regeneration, and can maintain the mechanical strength even in the extreme exhaust-related vibrations of vehicles. However, the regeneration near the wall (outer layer) is more difficult because of the heat loss and reduced gas flow near the wall. In this study, a flow is simulated to determine the flow control method for the more uniform flow in all filter layer. By using Star CCM+ commercial software, we obtain local velocity, streamline, and pressure distributions in the filter, which are typically difficult to obtain from measurements. The major control factors are the filter porosity, size and location of the distribution plate, and the number of blades of the swirler. By placing the distribution plate in front of the filter, the flow velocity near the wall was increased. The optimum location and size of the flat plate were chosen. By attaching the blade on the plate the flow velocity near the wall was increased more. Therefore, the regeneration efficiency is increased by using the swirler-type metal fiber DPF system.