大倾角中厚煤层软弱顶底板柔性护巷技术

在大倾角中厚煤层沿空留巷中,以往的支护方式难以满足大倾角中厚煤层巷道特殊的围岩结构稳定的需要,同时无法适应工作面内矸石垮落造成留巷困难。文章针对这一难题,首次提出并采用了"柔性护巷"技术,通过利用巷道上帮形成的由垮落矸石堆积在特制钢筋网上的"包护带",允许巷道顶板有一定的下沉量,从而使矸石充分为巷道顶板组合岩梁结构提供支撑力。在总结其施工工艺的基础上,通过现场试验,研究了巷道矿压显现规律、顶板移动规律、矸石垮落堆积规律和钢筋网变形规律;实验结果表明,在利用锚、网、索、支柱联合支护的基础上,应用"柔性护巷"技术能有效地解决大倾角中厚煤层沿空留巷技术难题。     

Novel experimental strategy for high resolution AFM imaging of membrane-associated bacterial toxins

Bacterial pore-forming toxins （PFTs） are essential virulence factors of many human pathogens. Knowl- edge of their structure within the membrane is critical for an understanding of their function in pathogenesis and for the development of useful therapy. Atomic force microscopy （AFM） has often been employed to structurally interrogate many membrane proteins, including PFTs, owing to its ability to produce sub-nanometer resolution images of samples under aqueous solution. However, an absolute prerequisite for AFM studies is that the samples are single-layered and closely-packed, which is frequently challenging with PFTs. Here, using the prototypical member of the cholesterol-dependent cytolysin family of PFTs, perfringolysin O （PFO）, as a test sample, we have developed a simple, highly robust method that routinely produces clean, closely-packed samples across the entire specimen surface. In this approach, we first use a small Teflon well to prepare the supported lipid bilayer, remove the sample from the well, and then directly apply the proteins to the bilayer. For reasons that are not clear, bilayer preparation in the Teflon well is essential. We anticipate that this simple method will prove widely useful for the preparation of similar samples, and thereby enable AFM imaging of the greatest range of bacterial PFTs to the highest possible resolution.     

基于PLC与变频器的船用载货电梯控制系统研究

某型船用载货电梯采用PLC控制。PLC单独使用时,在控制装置在使用过程中存在一些不足,会出现运行不稳定、能耗大、噪音大等问题。通过加装变频器对某型船的PLC单独控制的系统进行系统的升级改造,介绍了基于PLC与变频器的电梯控制系统硬件组成方案及逻辑控制程序。仿真结果表明加装变频器后,电梯故障率降低,提高了电梯运行的安全性和可靠性。     

A non-geometrically similar model for predicting the wake field of full-scale ships

The scale effect leads to large discrepancies between the wake fields of model-scale and actual ships, and causes differences in cavitation performance and exciting forces tests in predicting the performance of actual ships. Therefore, when test data from ship models are directly applied to predict the performance of actual ships, test results must be subjected to empirical corrections. This study proposes a method for the reverse design of the hull model. Compared to a geometrically similar hull model, the wake field generated by the modified model is closer to that of an actual ship. A non- geometrically similar model of a Korean Research Institute of Ship and Ocean Engineering (KRISO)’s container ship (KCS) was designed. Numerical simulations were performed using this model, and its results were compared with full-scale calculation results. The deformation method of getting the wake field of full-scale ships by the non-geometrically similar model is applied to the KCS successfully.     

基于直流漏泄电流的无铠装电缆绝缘性能检测方法

电缆绝缘性能的好坏对供电系统连续运行具有重要意义。采用直流漏泄电流方法,提出一种无铠装电缆的绝缘性能检测方法。该方法把电缆两端电流的同步测量,转换成电缆输出端开路时输入端电流的准确测量,简化了测量的复杂性,提高了直流漏泄电流的测量精度,改善了电缆绝缘性能的诊断准确度。该法用于地铁牵引变电站直流馈线电缆绝缘性能检测中,取得了良好的效果。     

地铁电缆放电信号采集系统的设计

牵引变电站直流1500V馈出电缆是地铁供电的重要部件。局部放电或火花放电是造成该电缆绝缘老化的主要原因。在分析地铁直流电缆放电信号特征的基础上,筒述了所设计的放电检测传感器的特性,设计了对多根地铁直流电缆放电信号采集的系统,并巳付之实施。     

城市基础设施公私合作模式所有权归属的模型分析

基础设施公私合作(PPP)模式中项目的所有权归属问题一直是PPP模式实施的难点.所有权的归属影响了基础设施PPP模式的推进.通过模型分析认为,若基础设施资产所有权的激励效应大于风险成本,所有权归民营企业最优;若资产所有权的激励效应小于风险成本,所有权归国有最优.     

南京地铁列车车轮踏面非正常磨耗初析

研究了南京地铁列车车轮踏面非正常沟状磨耗的成因.对车轮、钢轨的外形、材质和硬度等进行了测试,分析了轮轨接触和制动磨损的影响,提出了沟状磨耗的原因.测试结果分析表明,该地铁车辆拖车轮踏面上的凹槽磨耗主要是由于在制动施加频度过高、轮轨接触又不均匀的内因作用下产生的.     

石太铁路山区段涵洞水害成因分析及防治

山区铁路涵洞每年雨季易发生水害,影响铁路正常运营.为了查明山区铁路涵洞发生水害的原因,提高山区铁路抵御水害的能力,依托石家庄至太原铁路某涵洞水害实际治理工程,对特大洪水造成涵洞闷孔水害的成因进行分析,在调查该地区气象、水文、地质资料的基础上,按照"原状复旧、适当提升、完善排水系统、提升抗洪能力"的原则,经过桥涵水文检算...     

基于模型预测控制的智能车轨迹跟踪控制研究

为了完成智能车的轨迹跟踪,提出一种基于模型预测控制的轨迹跟踪方法,利用将运动学模型这个非线性系统线性化的方案,来获得必须的线性时变系统,采取模型预测控制的三要素来设计控制器。并且基于MPC在控制过程中能增加多种约束的优点,建立基于车辆运动学模型的约束做轨迹跟踪仿真实验,最后,基于山东理工大学智能车平台上GPS提供的定位信息,在校园中采集路线并对前提规划好的的轨迹进行实车验证。实验结果表明:基于MPC算法所设计的控制器能快速且稳定地跟踪期望轨迹。