不同参数电针对大鼠脊髓背角神经元伤害感受性反应的影响

目的　观察和比较不同参数电针对大鼠“足三里穴”的镇痛效应。方法　采用玻璃微电极细胞外记录大鼠腰部脊髓背角广动力型 (WDR)和特异伤害感受型 (NS)神经元的活动 ,观察了不同强度 (1mA ,5～ 6mA)和不同频率 (5、2 0、5 0、10 0Hz)电针对背角神经元伤害感受性反应 (C 反应 )的影响。结果　强电针时选用低频 (5Hz)较好 ,而弱电针时选用高频 (5 0Hz)为佳。结论　电针对脊髓伤害性传递的抑制作用具有强度和频率依赖性     

钢纤维混凝土在伸缩装置中的应用

通过对钢纤维混凝土的材料试验 ,为钢纤维混凝土在桥梁伸缩装置中的应用提供了依据     

Five-axis interpolation of continuous short linear trajectories for 3[PP]S-<Emphasis Type="Italic">XY</Emphasis> hybrid mechanism by dual Bezier blending

A novel five-axis real-time interpolation algorithm for 3[PP]S-XY hybrid mechanism is proposed in this paper. In the algorithm, the five-axis tool path for controlling this hybrid mechanism is separated into two sub-paths. One sub-path describes the movement of 3[PP]S parallel kinematic mechanism module, and the other one describes the movement of XY platform. A pair of cubic Bezier curves is employed to smooth the corners in those two sub-paths. Based on the homogenous Jacobian matrix of 3[PP]S mechanism, a relationship between the position errors of every driving joint in hybrid mechanism and the position deviation of the tool tip center point at the moving platform is established. This relationship is used to estimate the approximation error for the corners smoothing according to the accuracy requirement of tool tip center in interpolation. Due to the high computational efficiency of this corner smoothing method, it is integrated into the look-ahead module of computer numerical control (CNC) system to perform online tool path smoothing. By performing the speed planning based on a floating window scheme, a jerk limited S-shape speed profile can be generated efficiently. On this basis, a realtime look-ahead scheme, which is comprised of path-smoothing and feedrate scheduling, is developed to acquire a speed profile with smooth acceleration. A monotonic cubic spline is employed for synchronization between those two smoothed sub-paths in tool path interpolation. This interpolation algorithm has been integrated into our own developed CNC system to control a 3PRS-XY experimental instrument (P, R and S standing for prismatic, revolute and spherical, respectively). A club shaped trajectory is adopted to verify the smoothness and efficiency of the five-axis interpolator for hybrid mechanism control.     

混合动力电动汽车性能仿真软件的研究

依据软件工程的思想并结合电动汽车仿真的特点,利用MATLAB／Simulink和C 语言,建立了电动汽车各零部件的动态模型,完成了具有自主知识产权的电动汽车仿真软件的开发,并试用于混合动力电动轿车的仿真分析,仿真结果与PSAT相比较,证明了仿真软件的可靠性．     

电磁波在大气非平衡等离子体中的吸收

采用平板模型对入射电磁波在大气非平衡等离子体中的吸收特性进行了数值模拟,着重研究了大气中的负离子的存在、外加磁场以及碰撞频率等因素对电磁波吸收的影响,并给出了相关参数的数值模拟结果.     

Study on lift-up speed of aerodynamic compliant foil thrust bearings

Objective The experimental study on the lift-up speed of a new kind of compliant aerodynamic foil thrust hearings was performed on the multifunetional test rig established for testing the performances of foil gas bearings. Methods The lift-up speed of foil gas thrust hearing under given axial load was analyzed through the spectrum of axial displacement response in frequency domain. Results The test results indicated that the difference in the spectrum of axial displacement responses before and after lifting up of the rotor was obvious. After lifting up of the rotor, there were only larger components of rotation frequency and lower harmanie frequencies. If the rotor wasn＇t lift-up, there were also larger components of other frequencies in the spectrum. Conclusion So by analyzing the spectrum of axial displacement response, the results showed that the lift-up speed was about 1 860 rpm when the axial load was 31N.     

尾部悬吊对大鼠比目鱼肌mATP酶活性的影响

目的　研究尾部悬吊对大鼠比目鱼肌梭内、外肌纤维的mATP酶活性的影响 ,旨在探讨失重条件下梭内、外肌代谢的改变。方法　采用尾部悬吊法建立模拟失重模型 ,以钙增强的mATPase法检测模拟失重不同时期大鼠比目鱼肌梭内、外肌的mATP酶活性。结果　尾部悬吊可使梭外肌Ⅰ型肌纤维的构成比减少 ,Ⅱ型肌纤维的构成比增加 ,梭内肌纤维mATP酶活性增强 ,核袋 1纤维mATP酶染色不变或由阴性转变为弱阳性 ,核袋 2纤维和核链纤维由阳性转变为强阳性。结论　模拟失重导致梭内、外肌代谢发生改变 ,梭外肌纤维类型发生转化。     

消费心理与营销应对策略

章分析了现阶段消费心理对消费行为的影响，提出了营销工作应对变化的策略。     

浅析普通公路道路交通标志的设置

通过分析交通标志设置基础、设置功能、设置方式和设置场所选定,为正确设置道路交通标志提供参考与借鉴。     

T-2毒素对胎儿软骨细胞凋亡、Bcl-2和Bax表达的影响及硒的保护作用

目的　探讨T 2毒素对软骨细胞凋亡的作用,和对凋亡调控蛋白Bcl 2 与Bax表达的影响,以及微量元素硒对软骨细胞的保护作用。方法　采用电镜,Annexin V/PI法检测T 2 毒素致人软骨细胞凋亡的情况,采用流式细胞仪检测凋亡相关蛋白Bcl 2和Bax的表达。结果　T 2 毒素可引起软骨细胞发生凋亡的典型电镜形态改变;不同浓度(1~20μg/L)的T 2毒素均可以引起软骨细胞早期凋亡率和晚期凋亡率明显增加,且在一定范围内呈浓度依赖性,T 2毒素浓度为20μg/L时早期凋亡率最高达5.60%,晚期凋亡率最高达8.61%。生理浓度的微量元素硒可部分减弱T 2毒素引起的凋亡;不同浓度(1~20μg/L)的T 2毒素都能引起Bcl 2和Bax表达水平提高,浓度为10~20μg/L时,Bax/Bcl 2比值升高;硒能部分对抗T 2 毒素引起的Bcl 2 和Bax 表达的提高,使Bax/Bcl 2 比值下降,以降低凋亡率。结论　T 2毒素在浓度为1 ~ 20μg/L 时,可以引起软骨细胞凋亡; T 2 毒素引起的软骨细胞凋亡与软骨细胞内Bax/Bcl 2比值升高有关,硒对T 2毒素引起的软骨细胞凋亡有一定保护作用。