CO2 partial pressure in Northeast Atlantic and adjacent shelf waters: Processes and seasonal variability

CO₂ partial pressure in surface water was measured in the Northeast Atlantic and in the Hebride Shelf/North Sea area during a cruise with R.V. Poseidon in June 1991. A mean p_CO2 of 303 μatm was found in the Atlantic between 50°N and 60°N. For an atmospheric CO₂ content of 357.5 ppm(v) this corresponds to a partial pressure difference of −55 μatm. This supports the view that the subarctic Atlantic is a significant sink within the CO₂ cycle between the ocean and the atmosphere. A comparison of our measurements with other data reveals that the p_CO2 distribution changes significantly during May/June. This explained by seasonal warming, CO₂ exchange with the atmosphere and biomass production. The contribution by each of these processes to the seasonal variations is calculated. It was found that during a plankton bloom the production of biomass is the dominating factor and may lower seawater p_CO2 by almost 100 μatm. The shelf areas are charactrized by strong p_CO2 gradients which are explained by water exchange with the Atlantic, temperature effects and biomass production.     

Forecasting downtime event durations for the Morgantown people mover

A model was developed to forecast the duration of emergency shut downs of the Morgantown People Mover. An extensive data base of downtime events for a 2 1/2 year period were analyzed. Analysis of Variance (ANOVA) methods were applied to determine the significance of five variables which were hypothesized to influence downtime duration, including physical sub-system, restartablity, location of failure, number of vehicles in the system, and level of demand. Results of the analysis enable MPM system operators to provide improved information to system users during downtime events. The forecasting methodology also enables operators to evaluate alternative user management strategies during downtimes.     

The Influence of In-Plane Tyre Dynamics on ABS Braking of a Quarter Vehicle Model

For efficient analysis it is important to choose the proper model that fits the problem that needs to be solved. This paper discusses three pragmatic simulation models for longitudinal behaviour of a passenger car tyre (Steady State, Transient and Rigid Ring) that may be used in e.g. an ABS simulation. The characteristics of the simulation models are evaluated using some simple simulations. Simulations with a quarter vehicle model that includes load transfer effects are carried out to determine the deviation in results between the mentioned tyre models for an ABS application. The results show that the Steady State model may only be used below 10 Hz and that the Transient model is valid up to about 30 Hz. The results from the ABS simulation with the Rigid Ring model are most reliable and are clearly different from the Steady State and Transient model, which indicates that ABS simulations should be carried out with the Rigid Ring model. Additionally it is demonstrated that for tyre behaviour on uneven roads the influence of the tyre belt cannot be neglected.     

Analysis of Metropolitan Highway Capacity and the growth in vehicle miles of travel

A number of recent studies have examined the hypothesis of induced travel in an attempt to quantify the phenomenon (Hansen & Huang 1997; Noland, forthcoming). No study has yet attempted to adjust for potential simultaneity bias in the results. This study addresses this issue by the use of an instrumental variable (two stage least squares) approach. Metropolitan level data compiled by the Texas Transportation Institute for their annual congestion report is used in the analysis and urbanized land area is used as an instrument for lane miles of capacity. While this is not an ideal instrument, results still suggest a strong causal relationship but probably that most previous work has had an upward bias in the coefficient estimates. The effect of lane mile additions on VMT growth is forecast and found to account for about 15% of annual VMT growth with substantial variation between metropolitan areas. This effect appears to be closely correlated with percent growth in lane miles, suggesting that rapidly growing areas can attribute a greater share of their VMT growth to growth in lane miles.     

Influence of peak spreading and departure time choice on evaluation of its measures

Intelligent transport systems provide various means to improve capacity and travel time in road networks. Evaluation of the benefits of these improvements requires consideration of travellers' response to them. We consider a continuous‐time equilibrium model of departure time choice and identify a formula for the dynamic equilibrium departure rate profile. We develop the analysis to consider the effect on the cost incurred by travellers of ITS measures through their effects on each of the travel time in the absence of congestion, and the capacity for travel. This shows the importance in choice of departure time of travellers' values of time at each of the origin and destination of their journeys. We show the importance of these values of time in evaluation, and that if travellers value their time at both the origin and destination of their journeys, their responses will lead them to achieve a greater reduction in costs than would be achieved under free‐flow conditions.     

轻轨车辆噪声评价标准初探

根据轻轨车辆噪声的现状及特点,本文认为轻轨车辆的噪声仍以A声级评价为宜,但需规定容许的倍频程带声压值,以抑制低频噪声对人体的影响,同时提出了轻轨车辆噪声的控制标准。最后还指出了A声级评价总体的缺陷,建议应以人体工程学为基础,综合考虑噪声对人体的多方面危害,以制定出更完善的轻轨车辆噪声评价标准。     

Investigation of soot formation in Diesel-GTL fuel blends under quiescent conditions

In this study, a visual investigation of sprays and flames is performed, and soot formation in Diesel-GTL fuel blends is studied in a specially designed quiescent constant-volume chamber under various ambient gas temperatures and O₂ concentrations. Similar to the case of soot formation during diesel fuel combustion, the sooting zone during the mixing-controlled combustion of Diesel-GTL blends is located in the leading portion of the jet boundaries. Auto-ignition delay and soot concentration decrease with an increase of GTL content in the fuel blend. Soot also decreases with lower O₂ concentration, higher injection pressure, and lower ambient gas temperature. The lack of soot formation at lower O₂ concentrations and lower temperatures suggests that Diesel-GTL fuel blends can be successfully utilized in low-temperature diesel combustion technologies that are currently being developed. Furthermore, this mixing controlled combustion method with Diesel-GTL blends can be used to modulate various engine operation parameters, and therefore to simultaneously reduce the formation of soot and NOx within a wide range of diesel engine loads.     

Model Based Optimum Pid Gain Design of Adaptive Front Lighting System

Adaptive Front-Lighting System (AFLS) is a system which assists driver's field of vision by automatically controlling its brightness and illumination angle to adapt various driving conditions such as climate, traffic, road changes and so forth. This paper aims to propose novel model-based PID gain design method to improve the performances of Dynamic Bending Light (DBL) module that change horizontal angle of a system by applying Brent-Dekker algorithm that finds the root of nonlinear function and implementing Nelder-Mead simplex algorithm to the system reduction process. Along with the linear system model-based control theory, motor dynamics were modeled with frequency response. Validation of the prototype resulted in having less than 3 % error from the simulation, where position initialization and the real-time status monitoring function is available due to the closed loop control which enables over 3 times faster response than the conventional open-loop system.