A review of the European Union shipping policy

It is the aim of the European Union to develop a transport policy that supports its economic and sustainable growth and where the concept of sustainable mobility is a driver in the development of such policy. To achieve this goal, the European Union (EU) is promoting the shift of goods to unused existing capacity in rail and sea modes. As such, it is the objective of this paper to carry out a review of the European shipping policy at a time when the EU Member-States are suffering from high levels of congestion, noise and pollution that not only affect the environment but also the quality of life of all citizens. This paper considers the development of EU shipping policy in three stages.     

基于SVM的隧道衬砌空洞填充物雷达图像识别研究北大核心CSCD

衬砌背后空洞及其填充物对隧道结构安全具有重要影响,开展空洞探测识别对于结构安全评估和病害处置具有重要意义。首先采用室内试验和FDTD正演模拟相结合的方法,获得了空洞内填充空气、水、干砂、湿砂条件下的雷达图谱数据,并对不同填充物波形规律进行对比分析;然后,基于支持向量机算法对波形特征进行提取和分类识别,建立了一种空洞填充物的人工智能辨识方法。研究结果表明,采用傅里叶变换前的平均值、方差、平均绝对离差和傅里叶变换后的最大幅度值max(fft(X))四个统计量作为支持向量机的识别特征,可以有效区分出衬砌背后填充物的六种类型;当采取单一倾向数据时,识别准确率较好,六种物质二分类问题准确率均可以达到90%以上。     

The Concept and Practice of Treatment for Damage in Railway Tunnel Linings Caused by High-pressure Karst Water北大核心CSCD

In recent years, railway tunnels in karst areas have frequently suffered flooding after high-intensity rainfall, which seriously affects the safety of tunnel operation and the order of transportation, and even interrupts the traffic. Based on the water hazard case in the Yuanbaoshan Tunnel on the Zhijin-Bijie Railway Line, this paper explores the causes of lining damage in terms of geology, rainfall, and the design and construction of water hazard sections, and puts forward the treatment technology for tunnel water hazards with the core concept of making full use of existing structures and employing open drainage methods in key sections. Besides, this paper simulates and analyzes the formation of hazards and the treatment effect through numerical simulation. The results show that the subjective causes for the damage in tunnel linings include an insufficient understanding of the water-bearing formations at the geological investigation stage, the underestimation of water hazard risks posed by high-intensity rainfall during construction, and the unimproved waterproof and drainage system in the design alteration, while the objective reasons include the development of karst near the tunnel section that passes through the stratum, the strong connectivity of water conduits, and the high-intensity rainfall in a certain period of time on the tunnel site. As for the simulation results, they show that the increase of external water pressure caused by the sudden rise in groundwater level after rainstorm significantly increases the internal force of linings, and eventually leads to a much lower safety factor of sidewall linings and large scale damage, which is in consistency with the characteristics of the actual on-site damage. After on-site emergency treatment, the tunnel structure has become stable and even encountering unprecedentedly heavy rainfall twice, the tunnel has still remained in a good condition. Since then, no water hazards and other disasters have occurred, which proves that the treatment plan is valid. © 2022, Editorial Office of Modern Tunnelling Technology. All right reserved.     

Structural design considerations for ships operating in arctic regions北大核心CSCD

冰脊和冰山与极地船体发生碰撞将影响船体结构安全,并决定船体结构设计载荷。船体结构设计应遵循基于风险的设计原则,通常涉及以下极限状态设计准则:1)服务极限状态(SLS);2)最终极限状态(ULS);3)疲劳极限状态(FLS);4)事故极限状态(ALS)。最终极限状态和事故极限状态对应于发生概率极低的船与冰脊作用以及冰山撞击事件,旨在确保船体结构不会完全损毁。然而,对于较低概率水平的冰载荷分析,需进行较大数据量的工况分析,计算耗时无法承受。为此,引入环境等值轮廓方法,来大幅减少冰载荷分析所需工况数量,并给出设计工况最有可能的冰体参数组合方式。结合最终极限状态和事故极限状态,举例说明这一方法的运用方式。环境等值轮廓方法可为现有极地船舶船体结构设计方法提供有效补充。     

Lateral controller design for an unmanned vehicle via Kalman filtering

This paper proposes a lateral control system for an unmanned vehicle that is designed to improve the responsiveness of the system with the use of a PD control. The vehicle heading error can be stabilized, and the transient response characteristics can be improved using the proposed controller. A mathematical model of the vehicle dynamics using two degrees of freedom was developed for the controller design. The waypoint tracking method for autonomous navigation was tested with incorporation of the Point-to-Point algorithm with position and heading measurements received from GPS receivers via Kalman filtering. The performance of the designed controller was verified through experiments with a real vehicle.     

Modeling and control of an anti-lock brake and steering system for cooperative control on split-mu surfaces

The brake and steering systems in vehicles are the most effective actuators that directly affect the vehicle dynamics. In general, the brake system affects the longitudinal dynamics and the steering system affects the lateral dynamics; however, their effects are coupled when the vehicle is braking on a non-homogenous surface, such as a split-mu road. The yaw moment compensation of the steering control on a split-mu road is one of the basic functions of integrated or coordinated chassis control systems and has been demonstrated by several chassis suppliers. However, the disturbance yaw moment is generally compensated for using the yaw rate feedback or using wheel brake pressure measurement. Access to the wheel brake pressure through physical sensors is not cost effective; therefore, we modeled the hydraulic brake system to avoid using physical sensors and to estimate the brake pressure. The steering angle controller was designed to mitigate the non-symmetric braking force effect and to stabilize the yaw rate dynamics of the vehicle. An H-infinity design synthesis was used to take the system model and the estimation errors into account, and the designed controller was evaluated using vehicle tests.     

Design optimization of an injection mold for minimizing temperature deviation

The quality of an injection molded part is largely affected by the mold cooling. Consequently, this makes it necessary to optimize the mold cooling circuit when designing the part but prior to designing the mold. Various approaches of optimizing the mold cooling circuit have been proposed previously. In this work, optimization of the mold cooling circuit was automated by a commercial process integration and design optimization tool called Process Integration, Automation and Optimization (PIAnO), which is often used for large automotive parts such as bumpers and instrument panels. The cooling channels and baffle tubes were located on the offset profile equidistant from the part surface. The locations of the cooling channels and the baffle tubes were automatically generated and input into the mold cooling computer-aided engineering program, Autodesk Moldflow Insight 2010. The objective function was the deviation of the mold surface temperature from a given design temperature. Design variables in the optimization were the depths, distances and diameters of the cooling channels and the baffle tubes. For a more practical analysis, the pressure drop and temperature drop were considered the limited values. Optimization was performed using the progressive quadratic response surface method. The optimization resulted in a more uniform temperature distribution when compared to the initial design, and utilizing the proposed optimization method, a satisfactory solution could be made at a lower cost.     

Operating costs in Norwegian toll companies: a panel data analysis

The objective of this paper is to ease the planning of new toll projects by providing estimates of operating costs, and to help us make better informed decisions about the design of toll collection systems. To do so we use panel data for Norwegian toll companies to estimate average cost functions. The main results can be summarised as follows. We provide evidence of very important unexploited economies of scale. The estimated cost curves are very steep for traffic levels below the sample mean, and become almost entirely flat over a wide range above the sample mean. A higher share of vehicles using on board units will significantly reduce average costs. Competitive tendering will significantly reduce average operating costs by as much as 25%. Our results also suggest that increased number of lanes, higher debt and passenger charging will increase average operating costs whereas average operating costs are lower for toll cordons compared with other projects.

Residents’ expectations for new rail stops: optimistic neighborhood perceptions relate to subsequent transit ridership

Transportation - Although complete street policies are proliferating, little is known about how nearby residents perceive and act on their new active transportation opportunities. We survey the...     

Developing intermodal transport for small flows over short distances

Intermodal road-rail freight transport works best within markets with relatively large flows occurring over long distances, which corresponds poorly to the current demand for transport in the European Union. The purpose of this paper is to compare the capabilities of conventional European intermodal transport, with special reference to the competitiveness in markets with small flows over short distances, and to explore innovative concepts. Using a technological systems approach, key functions are identified as being the inducement and blocking mechanisms that affect the development and diffusion path of this 'small flows over short distances' (SFSD) system, providing a tool for empirical delineation of the system. These concepts are illustrated and analysed through a case study of the Swedish development project Light-combi. The results show that market and financial uncertainties, insufficient network connectivity and policies favouring the existing technology paradigm, severely hamper the development and diffusion of SFSD systems.