New technology and maritime training in the 21<Superscript>st</Superscript> century: Implications and solutions for MET institutions

This paper examines the impact of new technology on MET institutions in the 21^st century and discusses to what extent global MET institutions can enhance and enrich traditional practices through access to new technology and the use of innovative teaching and assessment methods within a sustainable and achievable framework. It notes the diverse standards and access to new technology by MET institutions across the globe and discusses the implications for them if they are to remain competitive and viable. The paper concludes that maritime institutions can benefit from the use of new technology, but only through rational planning and sustainable staged growth. A series of continua of technical development is provided to assist institutions, from the smallest to the largest, to plan for technical development and growth in a rational and feasible way.     

Dynamic analysis of multibodies system with a floating base for rolling of ro-ro ship caused by wave and slip of heavy load

Common effect of wave and slip of internal heavy load will make rolling of the roll-on ship serious. This is one of the important reasons for overturn of ro-ro ships. The multibodies System with a floating base is composed of ro-ro ship and slipping heavy load. This paper takes the rolling angle of the ship and the transverse displacement of the heavy load on desk as two freedoms. Making use of analysis of apparent gravitation and apparent buoyaney, the wave rolling moment is derived. By use of dynamic method of multibodies system with a floating base, dynamic equations of the system are established. Taking a certain channel ferry as an example, a set of numerical calculation have been carried out for rolling response of the ship and displacement response of the slipping heavy load under common effect of synchro-slipping heavy loads and wave.     

Simulation study of plane motion of air cushion vehicle

This research is on horizontal plane motion equations of Air Cushion Vehicle (ACV) and its simulation. To investigate this, a lot of simulation study including ACV‘s voyage and turning performance has been done. It was found that the voyage simulation results were accorded with ACV own characteristic and turning simulation results were accorded with USA ACV‘s movement characteristic basically.     

Piracy and armed robbery against ships today

This paper sets out the nature, scale and geographical locations of attacks against vessels today. Numerous examples in the paper highlight the worldwide nature of these attacks, the violence and differences in modus operandi and targets. The information is drawn from the International Maritime Bureau’s (IMB) Piracy Reporting Centre in Kuala Lumpur. Against this background, it briefly discusses issues of definition and response, including some technological devices, which can help locate hijacked vessels and deter unlawful boarding. The paper concludes with some practical thoughts on dealing with international crime, the victims of which, through the nature of their work have to travel beyond national boundaries, and so do not always attract the support of and commitment from national governments and law enforcement agencies where the attacks take place.     

女性下生殖道尖锐湿疣322例临床分析

本文对322例女性下生殖道尖锐湿疣的临床特点作了分析,指出激光辅以用药是较理想的治疗方法,一次治愈率为78.37%。本文讨论了妊娠合并尖锐湿疣与癌的关系,322例中癌变6例,重度非典型增生1例,癌变率为1.86%。     

Design and Evaluation of Robust Cooperative Adaptive Cruise Control Systems in Parameter Space

This paper is on the design of cooperative adaptive cruise control systems for automated driving of platoons of vehicles in the longitudinal direction. Longitudinal models of vehicles with simple dynamics, an uncertain first order time constant and vehicle to vehicle communication with a communication delay are used in the vehicle modeling. A robust parameter space approach is developed and applied to the design of the cooperative adaptive cruise control system. D-stability is chosen as the robust performance goal and the feedback PD controller is designed in controller parameter space to achieve this D-stability goal for a range of possible longitudinal dynamics time constants and different values of time gap. Preceding vehicle acceleration is sent to the ego vehicle using vehicle to vehicle communication and a feedforward controller is used in this inter-vehicle loop to improve performance. Simulation results of an eight vehicle platoon of heterogeneous vehicles are presented and evaluated to demonstrate the efficiency of the proposed design method. Also, the proposed method is compared with a benchmark controller and the feedback only controller. Time gap regulation and string stability are used to assess performance and the effect of the vehicle to vehicle communication frequency on control system performance is also investigated.     

Nonlinear Model-Based Multivariable Control for Air &amp; Charging System of Diesel Engine with Short and Long Route EGR Valves

The objective of this study is to investigate a nonlinear model-based multivariable (MIMO, Multi Input Multi Output) technique to decouple actuators interaction and to reduce the calibration effort, while increasing control performances, above all in transient conditions, and robustness with respect to model uncertainties and system parameter variations. The presented control technique is based on the development of a nonlinear dynamical physical model of the diesel air and charging system. Feedback Linearization control is then applied to decouple actuators’ interactions and compensate for nonlinearities. A new set of virtual inputs are defined inverting the system differential equations. Relation among the new virtual inputs and the outputs is purely linear and decoupled, meaning that each virtual input affects linearly only one output. Moreover, a linear control block is added to guarantee transient and steady state performances and closed loop robustness. The proposed control approach has been validated through small diesel engine dyno and vehicle activities. Transient test bench maneuvers show that the control is able to coordinate the actuators in order to fulfill the targets and to guarantee similar performances in different operating points. In addition the robustness to environmental changes has been demonstrated by vehicle tests at different ambient conditions.     

On the nonlinear and time-varying acoustic modeling of the simplified intake or exhaust silencing system

The intake or exhaust noise of an internal combustion engine is usually predicted by the linear, time-invariant source model in frequency domain with reasonable precision. However, the actual finite amplitude pulsation involves the nonlinear, time-varying characteristics that are prominent in time-domain. To overcome the discrepancy between two source models, an approximate nonlinear and time-varying frequency domain source model can be employed by appending the nonlinear or time-varying terms to the linear, time-invariant source model. Proper selection of the nonlinear describing terms varying with time is important for the realistic and precise prediction of the radiated sound. For the selection of such terms, flow and motional characteristics in the valve and orifice of a simplified fluid machine comprised of very large reservoir, valve, and duct is considered. Effects of each describing term and the combined terms are investigated by comparing the sound spectrum predicted from nonlinear source model to that from linear source model. In the comparison, the sound spectrum calculated by the method of characteristics is used as a reference. It is found that the source model using only the velocityrelated terms yields the best result among all the models using various combinations of the terms with different characteristics. The best model yields a difference from the linear source model within ±5 dB in overall sound level. Change of acoustic loads results in a difference of 20–27 dB in linear source model from the reference data; however, maximum 10–22 dB deviations are observed in using the various nonlinear source models. It is concluded that more than 4 describing terms should be employed in the nonlinear model to obtain a realistic result of the radiated sound from the intake or exhaust system.     

Lubrication and tribology in seawater hydraulic piston pump

Water hydraulic systems have provoked major interest because of the human friendly and environmental safety aspects. Piston pump is one of the most frequently used hydraulic units in recent engineering technique. In water hydraulic piston pump, poor lubrication is more likely to happen than in oil hydraulic one because of difference in properties between water and oil. So there are some key problems such as corrosive wear and erosion, which are investigated briefly. Many new materials have been developed, which give longer life expectancies with water without corrosion and erosion. A new type of seawater hydraulic piston pumps with better suction characteristics had been developed at HUST. Much of this research has concentrated on new materials, structure and experiments, which are also specially introduced.     

Research on Motion Estimation Algorithm of Star Point Based on Nonlinear Gaussian Fitting

The energy distribution model of motion blurred star point is analyzed. The distribution of the star point approximates to a two-dimensional (2D) Gaussian distribution under degeneration. Two multi-parameter nonlinear Gaussian fitting methods (GFMs) are proposed, and the relationship between fitting parameters and motion blur parameters is analyzed. Estimation of the parameters of motion blur by fitting parameters is calculated to realize the error compensation of the motion blur. The simulation results show the effectiveness and accuracy.