Experimental study of the flow characteristics in an automotive HVAC system using a PIV technique

Air flow inside an automotive HVAC module was visualized using a high-resolution PIV technique with varying temperature control modes. The PIV (particle image velocimetry) system used for the experiment consisted of a 2-head Nd:YAG laser (125 mJ), a high-resolution CCD camera (2 K × 2 K), optics and a synchronizer. A real automotive HVAC module was used as a test model, and some of its casing parts were replaced with transparent windows to capture the flow images of the laser-light-sheet illumination. In addition, instant velocity fields were measured for three different temperature control modes by adjusting the temperature baffle. Characteristics of the air flow inside the automotive HVAC were then evaluated based on the time-averaged PIV data. Results from the experiment showed that flow for the warm mode loses more momentum due to its complicated flow path. Thus, the present PIV data can be used to validate numerical prediction and to improve the performance of HVAC modules.     

The viability of pure vegetable oil as an alternative fuel for large ships

Heavy fuels are likely to remain the dominant fuel source for two-stroke, low-speed diesel engines for large ship propulsion for the next decade or more. There is however, potential for increased use of pure vegetable oils (PVO) as an alternative and, by emitting lower levels of several pollutants, this can help the attainment of Annex VI of the MARPOL 73/78 convention aimed at large ships using fuels with less than 4.5% sulphur or 1.5% sulphur in SO_X emission control areas The use of alternative fuels can also influence the attainment of the Kyoto protocol that requires greenhouse gas emissions to be reduced by 5% by 2010 compared to 1990. This paper analyses the physical and chemical properties of various pure vegetable oils as an alternative to heavy fuel oil for large ship propulsion.     

The social dimension in action: A multilevel,personal networks model of social activity frequency between individuals

This paper presents a social activity-travel generation model, which explicitly incorporates the individual’s social dimension through the concept of personal networks, modeling the multilevel structure of social relations defined by these networks. The objective of the analysis is to study the relevance of the social dimension as a source of explanation of social activity-travel generation behavior between an individual and each relevant person of their social life. The paper uses a disaggregated perspective of personal networks, explicitly incorporating the characteristics of each network member as well as the characteristics of the overall social structure. Using an ordinal multilevel specification that accounts for the social network in which individuals are embedded, four dimensions are studied: personal characteristics, “with whom” activities are performed, social network composition and structure, and ICT (information and communication technology) interaction. The results show that a proper and complete understanding of social activity generation requires going beyond the individualistic paradigm, explicitly incorporating the role of the social dimension in the study of this decision-making process.     

现代化机车车辆是竞争的因素

在运输系统相互间的竞争和铁路内部竞争中,现代化的机车车辆是起决定性作用的因素.从用户的角度讨论了现代化机车车辆的功能特征,并深入研究了相互间的竞争以及铁路内部竞争和制造厂之间的竞争对机车车辆现代化的作用以及对今后的影响.     

Carbon and nutrient dynamics in a hypertrophic lagoon in southwestern Taiwan

Dissolved and particulate phases of carbon (DIC, DOC, POC) and nutrients (DIN, DIP, DSi, DON, DOP, PN) were investigated bimonthly from August 1999 to August 2000 to study biogeochemical dynamics of carbon and nutrients in Tapong Bay, a small semi-enclosed and hypertrophic lagoon in southwestern Taiwan. The lagoon has only a tidal inlet for exchanging water between Tapong Bay and Taiwan Strait, which may result in low water exchange rates and various oxygen-deficient conditions in bottom water of the inner bay during warm seasons. The water exchange time of Tapong Bay ranges from 7 days (summer) to 13 days (winter) with a mean of 10 days. Nutrient dynamics were largely ascribed to allochthonous inputs, biological and exported removals in the lagoon. Diffusion fluxes from sediments to overlying water accounted for only about 7.6% of annual DIN inputs and 1.0% of annual DIP inputs. High primary productivity (89 mol C m⁻² year⁻¹) supported by abundant nutrients primarily drove the lagoon into a hypertrophic condition as particulate organic matter was derived mainly from biological production. Excess of DIP appeared to occur throughout the study period in the lagoon. Temperature, solar radiation and turbidity, rather than nutrients, perhaps controlled seasonal variations of primary productivity. The net ecosystem production (NEP) derived from daily changes of DOC and POC inventories was about 6.3 mmol C m⁻² day⁻¹ that was close to 6.7 mmol C m⁻² day⁻¹ simulated from the biogeochemical modeling. Therefore, the net ecosystem production (NEP) rate of organic carbon estimated from the biogeochemical model was reliable, and the NEP was temporally variable with an annual mean of 5.8 mol C m⁻² year⁻¹, implying that Tapong Bay was an autotrophic system. Although calcification proceeded pronouncedly in warm seasons, an invasion of CO₂ was significant in this system. In terms of nitrogen budget, the annual nitrogen fixation exceeded the annual denitrification with a magnitude of 1.30 mol N m⁻² year⁻¹, which may be supported by the abundance of nitrogen fixation microplanktons in the lagoon.     

Application of Nonlinear Control Theory to Electronically Controlled Suspensions

This paper illustrates the use of nonlinear control theory for designing electro-hydraulic active suspensions. A nonlinear, “sliding” control law is developed and compared with the linear control of a quarter-car active suspension system acting under the effects of coulomb friction. A comparison will also be made with a passive quarter-car suspension system. Simulation and experimental results show that nonlinear control performs better than PID control and improves the ride quality compared to a passive suspension.     

Numerical determination of flushing time for stratified water bodies

It is often advantageous to model a semi-enclosed estuarine or coastal embayment (e.g. fish farms or tidal inlets, or typhoon shelters) as a separate system within a larger water body connected to the outer sea. The water quality of the system depends crucially on its flushing time—the average time of a particle in the system. The flushing time is governed by the barotropic and baroclinic tidal exchanges between the system and the outer sea. We describe herein a general method to determine systematically the flushing time of a stratified water body via a numerical tracer experiment. Numerical solution of the 3D flow and mass transport equations for many practical problems show that the tracer mass removal process depends on the physical topography and bathymetry, tidal range and the degree of stratification in the outer sea. Field application suggests that the tracer mass variation can be well approximated by a double-exponential decay curve that can be described by three flushing coefficients. Using a simple analytical two-segment model, the flushing coefficients can be given a clear physical interpretation, and the flushing time can be easily determined in terms of the coefficients. The method is illustrated by application to a number of tidal inlets in Hong Kong, in both the dry and wet season. The connection between the numerically determined flushing time and the traditional bulk flushing time obtained from salt-balance methods is established.     

The UNCTAD and WORKPORT models of port development: evolution or revolution?

Around ten years have elapsed since the UNCTAD model on port development was put forward as an explanation of how ports have adapted to incorporate technological, political and operational changes. The UNCTAD Three Generation Port Model is critically examined in the light of research carried out under the WORKPORT project funded by the European Commission, 1998-1999. Evidence from the WORKPORT study shows that, rather than developing in discrete steps, ports evolve continuously, adapting to new technologies, fresh legislation, revised working practices and other influences on an as-required basis. Further, it is demonstrated that several streams of evolution can be observed simultaneously; the pace of change within each stream can vary substantially. One of the prominent features of ports is that they often have several terminals, some operating along traditional lines while others may be leading edge in terms of technology, working practices or other aspects; all of them may be equally effective. The UNCTAD model, implying ports develop in discrete steps, or generations, is therefore shown to be fundamentally flawed.