Transport and nation‐state governments worldwide

The Sydney Olympics held in September 2000 provided an opportunity to monitor the planning of transport provision for the world's greatest sporting spectacular. As the single largest major event, the pressures on a city's transport system are enormous, as witnessed by the previous Games in Atlanta and Barcelona. This paper takes a value-chain approach to assess transport performance as a crucial element in the delivery of the Sydney Olympic Games. We begin with a brief overview of strategic value, highlighting some generic aspects of value chains followed by the transport delivery system that came to the fore as significant 'drivers' in the value chain. This is followed by a summary of the effectiveness of the buses, trains, taxis, roads and the airport. A more detailed look is provided of the private bus sector where the problems leading up the opening of the Games received a great deal of media attention. The paper concludes with two stories, one good, one not so good, about transport and the Olympic Games.     

Restructuring the Lebanese Railway and Public Transport Authority (RPTA): From losing operator to effective regulator

The Lebanese Council of Ministers has recently endorsed a plan for the reform and organization of the Land Public Transport Sector (LPTS). The plan implies a new role for the government: it would cease being just a loss-making service provider and become the planner and regulator of the sector under a new strategy. The strategy would aim at creating the enabling environment and conditions that allow and ensure the existence of sufficient, affordable and efficient transport services provided by several private-sector operators functioning under competitive conditions. Thus, the existing autonomous Railway and Public Transport Authority (RPTA) will be restructured to serve as the effective regulator, its bus operations will be corporatized (for possible eventual privatization), and all existing private sector service providers will be regulated. Following a brief overview of the problems of the sector and the components of the reform and organization plan, this paper focuses on developing options for the restructuring of the RPTA to carry out its new role.     

An overview of transport in Kuwait

Abstract

Kuwait is a relatively small country located at the top of the Arabian Gulf with population in 1980 amounting to 1.355 millions. Kuwait occupies an area of approximately 17 800 square kilometres. Kuwait's main source of national income is oil export. Income from oil export and other sources has resulted in Kuwait having the highest per capita income in the world. Consequently vehicle ownership is very high and traffic is ever growing and extending. Kuwait is self‐sufficient in only a few commodities and has a shortage of local labour. This means that transport has a fundamental role to play at the national and international level for the development of Kuwait's economy.

This paper provides a brief statement of transport in Kuwait. It starts by describing Kuwait's national setting and touches on the economic and social aspects in Kuwait that have an influence on transport patterns and needs. It describes the national transport system and covers road, air, rail and ports. Urban development planning in Kuwait is described and issues related to stages of urban development planning. The Kuwait City Master Plan and new town initiatives are presented. The urban transport system in Kuwait Metropolitan Area is described. In particular the characteristics of the urban road network and public transport facilities are outlined along with recent transport planning studies and new initiatives in the urban transport system.

The paper ends with a statement on organizations involved in the transport sector in Kuwait and a note on transport finance.     

Initiatives in Philippine Coastal Management: An Overview

Standardized and free-format questionnaires on the state of coastal management were fielded to coastal management practitioners during three workshops and a national feedback and recommendation workshop. The most commonly cited responses were identified for each of 13 political regions and overall trends were identified. Management frameworks frequently included research, community organizing, education, livelihood, resource enhancement, resource protection, regulation, and networking components. Gender issues, documentation, and infrastructure investment were rare. The most commonly perceived environmental problem was illegal/ destructive fishing and its associated overfishing and low fish catch. The most commonly cited socioeconomic problem was the inadequacy of law enforcement. The best monitored variables were usually those related to environmental management: status and change of habitats, resources, and degree of enforcement/patrolling activities. The most common nonregulatory enhancement, aside from environmental education (which is the most popular), was mangrove reforestation. In terms of regulations, the majority of the respondents have reportedly formulated an integrated coastal management plan. In practice, regulating destructive and illegal fishing practices and then the establishment of fish sanctuaries are the next most implemented. The most popular quality-of-life enhancement strategies focused on the improvement of sustainable fishing as a livelihood and on a variety of supplementary livelihoods. The most usual institutional intervention being implemented was the setting up of local community people's organizations. Major factors which may influence success or failure of coastal management and recommendations on research, community organizing and livelihood, legislation and policies, implementation and coordination, and networking are also summarized.     

Estimates of vertical mixing during a Lagrangian experiment off the Galician coast

An adjoint 1-D model was used to determine vertical diffusivity coefficients from temperature profiles collected within a filament escaping from the Galician coast following an upwelling event. The optimisation scheme ended with relatively high diffusivity values within the thermocline (9×10⁻⁵ m² s⁻¹). Such high values are relevant for biogeochemical exchanges between surface and deep waters in stratified areas.The optimised values were several orders of magnitude higher than the bulk of diffusivity measurements recorded with a free-falling device; however, the optimisation solution was consistent with the arithmetic mean of the measurements in the thermocline (7.7×10⁻⁵ m² s⁻¹), giving more weight to the few largest values. Below the thermocline, the data assimilation method failed because of the three-dimensional nature of the advective field of the upwelling system. Ignoring this advective forcing in the model led to estimates that were two orders of magnitude too high.The results suggest that turbulent mixing is a random process where a few intense events determine the average mixing that drives the long-term evolution of the water column structure. This statistical property is very important when one wants to use instantaneous diffusivity measurements for modelling purposes.     

Dual extended Kalman filter for vehicle state and parameter estimation

The article demonstrates the implementation of a model-based vehicle estimator, which can be used for combined estimation of vehicle states and parameters. The estimator is realised using the dual extended Kalman filter (DEKF) technique, which makes use of two Kalman filters running in parallel, thus 'splitting' the state and parameter estimation problems. Note that the two problems cannot be entirely separated due to their inherent interdependencies. This technique provides several advantages, such as the possibility to switch off the parameter estimator, once a sufficiently good set of estimates has been obtained. The estimator is based on a four-wheel vehicle model with four degrees of freedom, which accommodates the dominant modes only, and is designed to make use of several interchangeable tyre models. The paper demonstrates the appropriateness of the DEKF. Results to date indicate that this is an effective approach, which is considered to be of potential benefit to the automotive industry.     

Modelling of wheels and rail discontinuities in dynamic wheel-rail contact analysis

A classification of wheel-rail contact is given. Difference is made between modelling of a running wheel with continuous single-point-contact, as is common practice in wheel-rail contact analysis, and a wheel with transient double- or multi-point-contact, which may occur for rail irregularities with curvatures larger than that of the wheel circumference. It is shown that application of the first model for these irregularities will strongly underestimate the contact forces as it does not describe occurring mechanisms correctly. Further, it is shown that in principle it is not possible to describe the second type of contact fully correct with a lumped wheel model. Both wheel models are formulated mathematically for some basic contact cases. Afterwards, results are applied to a linear track model. Analytical closed-form solutions are found in the frequency domain for arbitrary type of contact and numerically transformed to the time domain. Finally, the necessity is shown to avoid situations where transient multiple-point-contact may occur (like rail joints) in practice.     

Demand for rail travel to and from airports

Rail access to airports is becoming increasingly important for both train operators and the airports themselves. This paper reports analysis of inter-urban rail demand to and from Manchester and Stansted Airports and the sensitivity of this market segment to growth in air traffic and the cost and service quality of rail services. The estimated demand parameters vary in an expected manner between outward and inward air travellers as well as between airport users and general rail travellers. These parameters can be entered into the demand forecasting framework widely used in the rail industry in Great Britain to provide an appropriate means of forecasting for this otherwise neglected market segment. The novel features of this research, at least in the British context, are that it provides the first detailed analysis of aggregate rail flows to and from airports, it has disaggregated the traditional generalised time measure of rail service quality in order to estimate separate elasticities to journey time, service headway and interchange, and it has successfully explored departures from the conventional constant elasticity position.