车用柴油机电控开发系统的软,硬件设计及应用

本文研制了一种新的发动机电 控燃油系统的开发系统的微机测控系统。     

净化消声器压力损失计算方法

本文综合运用流体力学、热力学及化学有关理论,对柴油机用的净化消声器的压力损失算法进行推导及试验验证,为在净化消声器设计阶段预测净化消声器对发动机性能的影响提供了可用的手段。     

水上交通事故调查处理中"责任"问题探讨

法律、法规赋予海事管理机构在水上交通事故调查处理中“查明原因、判明责任”的职能,“责任”含义的多样性导致对“判明责任”含义的不同理解.从“责任”的基本含义阐述“判明责任”的内容及“判明责任”与“法律责任”的关系.     

低洼平坦地带公路排水设计方法研究

在总结分析低洼平坦地带公路排水问题典型表现形式的基础上,结合各种地形的具体特征,提出了在不同地质地形条件下,公路排水设施的布设方案和土工合成材料的应用方式。     

某型汽轮机超速脱扣试验浅析

某型汽轮机的超速保护装置采用脱扣结构,文章针对该汽轮机的超速脱扣结构进行分析,总结此种超速脱扣装置的装配要求和试验方法,以利于该型汽轮机的生产。     

Study on T lymphocyte subsets and NK cells in patients with Graves＇ disease combined with type 2 diabetes

Objective To investigate changes in T lymphocyte subsets and NK cells in patients with simple Graves' disease (GD)and Graves' disease combined with type 2 diabetes mellitus (GD/T2DM). Methods Fifteen cases of GD/ T2DM were selected from our hospital from November 2001 to November 2004. Before and after therapy thyroid function, thyroglobulin antibody (TGA), thyroid microsomal antibody (TMA) and blood glucose level were measured, and T lymphocyte subsets (CD3, CD4, CD8, CD4/CD8) and NK cells (CD56) were measured by immunofluorescence double labeling monoclonal antibody and flow cytometry, respectively. At the same time, comparison was made with simple GD (15 cases), T2DM (15 cases) and healthy control (20 cases). Results Before therapy, CD4/CD8, CD4 and NK cells in GD/T2DM were less than normal, and there was no significant difference in comparison with simple GD (P<0.05). In T2DM group, only CD4/CD8 and CD4 were less than those of healthy controls (P<0.05). When thyroid function recovered after 1 to 3 months of methimazole treatment in both GD/T2DM and simple GD groups, various indexes recovered, which were more obvious in simple GD. Conclusion Immune hypofunction of GD may be the key to the immune abnormality of GD/T2DM, which is more significant than that of simple GD or T2DM. The recovery of thyroid function and immune abnormality is not consistent, and the recovery of GD is more significant than that of GD/T2DM.     

上海港国际集装箱中转箱量发展趋势

1上海港集装箱中转箱量发展现状近3年来,上海港集装箱中转业务稳定发展,中转箱量逐年提高。表1显示了2004年以来上海港中转箱量的发展情况。表1上海港2004～2006年中转箱量／万TEU     

“工厂法”沉管隧道早期性能的足尺试验研究

由于沉管隧道管段体积大、结构形式复杂、施工工艺复杂,容易因温度、收缩以及约束等原因,造成管段结构在预制阶段出现危害性裂缝,进而影响结构的服役性能和耐久性能。文章依托在建港珠澳大桥沉管隧道工程实例,开展了足尺试验,对"工厂法"沉管管节关键部位的温度和应变发展实施了监测,分析对比了温度发展规律和应变发展规律。分析结果表明:在早期因混凝土水化热引起温度上升,整个管段结构膨胀受拉,温度到达峰值后逐渐下降,结构也收缩恢复;但由于混凝土自收缩等因素的存在,结构最终收缩受压。研究所提供的试验结果可作为深入进行数值分析的一个基础。     

总装车间继电器安装自动化的应用

文章介绍了一种车载线束继电器安装的自动化设备,设备采用Dalta并联机器人抓取继电器进行安装,继电器上料由另一台Dalta并联机器人和视觉引导完成。继电器安装过程中,力和位移的数据被实时监控和保存,单颗继电器安装节拍满足≤1.1s,单条线束作业节拍≤45s,满足汽车总装生产线节拍要求。