Understanding urban mobility patterns from a spatiotemporal perspective: daily ridership profiles of metro stations

Transportation - Smart card data derived from automatic fare collection (AFC) systems of public transit enable us to study resident movement from a macro perspective. The rhythms of traffic...     

燃气调压器声发射信号特征与流量关系分析

文中提取燃气调压器声发射信号的标准差、峭度这两个时域特征及重心频率、均方根频率这两个频域特征,分析特征与流量的对应关系,使用相关系数进行评价。基于北京某调压站采集的声发射信号及流量数据,实验结果表明,流量与标准差、峭度、重心频率、均方根频率的相关系数分别为0.8192、0.2889、0.7745、0.641。可见标准差、重心频率及均方根频率与流量相关性较强,峭度与流量相关性较弱。     

一种新型双燃料喷射器设计与数值模拟

在现有共轨喷油器的基础上,提出一种适用于液态天然气(LNG)液喷的新型双燃料喷射器结构,并运用AMESim软件建立柴油和天然气喷射过程的计算模型,研究柴油压力、LNG压力、柱塞直径和控制腔进油孔孔径对针阀运动和喷油速率的影响规律,验证了设计方案的可行性,也为适用于 LNG液喷的引燃柴油/天然气新型双燃料喷射器的设计提供理论依据.     

一种Ka波段宽带同轴探针过渡的设计

采用同轴探针过渡的方式可以实现低损耗、宽频带、驻波小的要求,同时解决了传统过渡方式不密封的问题,提升了射频组件长期储存性能。利用CST软件建模并仿真优化,对影响过渡性能的几个因素进行分析,得出了可供工程应用的设计方案。     

Large-eddy simulation of cross-flow around ship sections

The present work is motivated by phenomena occurring in the flow field around ship-like bodies with an incoming lateral flow (cross-flow, 90 ° drift angle). Three-dimensional unsteady flows around different ship sections are investigated by using computational fluid dynamic (CFD) tools with large-eddy simulation (LES) subgrid-scale turbulence model. The simulation results are compared to measurements at several Reynolds numbers in the 90–200,000 range. Focus in our investigation is on the characterization of the motion of vortex structures generated by the separated flow. Another target in the study is to obtain better knowledge of the hydrodynamic forces acting on the sections. Computed pressure and drag coefficients are compared with experimental measurements. The comparison between simulations and measurements shows that an LES model can predict the flow field around ship sections in detail and the hydrodynamic forces acting on the sections.     

Simulation of hydrodynamic performance of drag and double reverse propeller podded propulsors

The unsteady performance of drag and double reverse propeller podded propulsors in open water was numerically simulated using a computational fluid dynamics (CFD) method. A moving mesh method was used to more realistically simulate propulsor working conditions, and the thrust, torque, and lateral force coefficients of both propulsors were compared and analyzed. Forces acting on different parts of the propulsors along with the flow field distribution of steady and unsteady results at different advance coefficients were compared. Moreover, the change of the lateral force and the difference between the abovementioned two methods were mainly analyzed. It was shown that the thrust and torque results of both methods were similar, with the lateral force results having the highest deviation     

Epistemic-based investigation of the probability of hazard scenarios using Bayesian network for the lifting operation of floating objects

Owing to the increase in unprecedented accidents with new root causes in almost all operational areas, the importance of risk management has dramatically risen. Risk assessment, one of the most significant aspects of risk management, has a substantial impact on the system-safety level of organizations, industries, and operations. If the causes of all kinds of failure and the interactions between them are considered, effective risk assessment can be highly accurate. A combination of traditional risk assessment approaches and modern scientific probability methods can help in realizing better quantitative risk assessment methods. Most researchers face the problem of minimal field data with respect to the probability and frequency of each failure. Because of this limitation in the availability of epistemic knowledge, it is important to conduct epistemic estimations by applying the Bayesian theory for identifying plausible outcomes. In this paper, we propose an algorithm and demonstrate its application in a case study for a light-weight lifting operation in the Persian Gulf of Iran. First, we identify potential accident scenarios and present them in an event tree format. Next, excluding human error, we use the event tree to roughly estimate the prior probability of other hazard-promoting factors using a minimal amount of field data. We then use the Success Likelihood Index Method (SLIM) to calculate the probability of human error. On the basis of the proposed event tree, we use the Bayesian network of the provided scenarios to compensate for the lack of data. Finally, we determine the resulting probability of each event based on its evidence in the epistemic estimation format by building on two Bayesian network types: the probability of hazard promotion factors and the Bayesian theory. The study results indicate that despite the lack of available information on the operation of floating objects, a satisfactory result can be achieved using epistemic data.     

Evaluating the impact of PSC inspectors’ professional profile: a case study of the Spanish Maritime Administration

Full-scale globalisation of trade has been accompanied by a progressive liberalisation of maritime transport. The proliferation of open registries has created a situation in which Port State Control (PSC) has become much more effective than the feeble or non-existent control exercised by those States. This study has been conducted on the influence of the professional profile of inspectors on inspection results. The objective of our paper was to evaluate the impact of PSC inspectors’ professional profile by conducting a case study of the Spanish Maritime Administration. The paper concludes with a discussion of the correlation between deficiencies detected and professional profiles.     

Employability skills of maritime business graduates: industry perspectives

The maritime industry underpins international business and world trade. As to be expected, business management is critical for the maritime industry, requiring highly trained individuals and teams to lead the development, implementation and control of sound contemporary management practices. Maritime business degrees are developed by universities to meet such demand by providing graduates with sufficient skills for the onshore business-related roles. This empirical study conducted in Australia, USA and Canada, investigates current and future industry employability skills for maritime business graduates through focus groups, individual interviews and an online survey with senior managers in maritime organisations. This study found the important employability skills for maritime business graduates which include communication, problem solving, adaptability, self-management, team work, and digital literacy and technology. Demand for digital literacy and technology knowledge and skills have increased due to the maritime industry having a trend of moving towards digitalisation and automation. However, the survey findings revealed that a skills focus for maritime business graduates will not be the technology itself but the use and management of technology. In relation to future skills/knowledge required from maritime business degree graduates in 10 years’ time, communication and adaptability are recognised as being the most important. Employers expect that maritime business graduates should be able to adopt new technology and be competent in communication, and be more adaptable given the highly dynamic nature of the maritime industry. Moreover, they require graduates to be equipped with a higher level of computer skills, have a strong work ethic and multilingual skills.     

Three-dimensional fluid-structure interaction case study on cubical fluid cavity with flexible bottom

In this paper, we report our study on a numerical fluid-structure interaction problem originally presented by Mok et al.(2001) in two dimensions and later studied in three dimensions by Valdés Vazquez(2007), Lombardi(2012), and Trimarchi(2012). We focus on a 3D test case in which we evaluated the sensitivity of several input parameters on the fluid and structural results. In particular, this analysis provides a starting point from which we can look deeper into specific aspects of these simulations and analyze more realistic cases, e.g., in sails design. In this study, using the commercial software ADINATM, we addressed a well-known unsteadiness problem comprising a square box representing the fluid domain with a flexible bottom modeled with structural shell elements. We compared data from previously published work whose authors used the same numerical approach, i.e., a partitioned approach coupling a finite volume solver(for the fluid domain) and a finite element solver(for the solid domain). Specifically, we established several benchmarks and made comparisons with respect to fluid and solid meshes, structural element types, and structural damping, as well as solution algorithms. Moreover, we compared our method with a monolithic finite element solution method. Our comparisons of new and old results provide an outline of best practices for such simulations.