Vibration transmission reduction from a centrifugal turbo blower in a fuel cell electric vehicle

This paper presents a multi-body flexible dynamic analysis of a centrifugal turbo blower for a fuel cell electric vehicle (FCEV) based on the application of computer-aided engineering (CAE) to predict the acceleration at the mount position of the blower. This predicted acceleration is validated by using the measured acceleration data. The numerical simulation for the multi-body flexible dynamics of the blower is used not only to identify the most effective mount among four mounts in an FCEV by controlling the complex stiffness of the isolator, but also to suggest the range of complex stiffness of the isolator at the most effective mount. This numerical simulation technology can be useful for the estimation of the variation of vibration transmission for the structural modification of the turbo blower.     

Modeling,parameter estimation and nonlinear control of automotive electronic throttle using a Rapid-Control Prototyping technique

An electronic throttle consists of a DC motor, spur gears, a return spring, a position sensor, power electronics and an electronic control unit. Fast and precise position control of this electromechanical system is relatively difficult due to very high friction and the strong nonlinearity of the spring. Simple application of linear control, such as PID, fails. In this paper, two new controller structures suitable for different reference signal types are described. The key component of the position controller is the friction compensator based on either/both feedforward or feedback principles. The quality of the resulting behavior was measured using several criteria including the measure of control activity around the equilibrium position. The control activity directly influences the vibration, the noise and the wear of the servo system. The proposed controllers demonstrated superior behavior compared with other published structures.     

GNN-CRC: Discriminative Collaborative Representation-Based Classification via Gabor Wavelet Transformation and Nearest Neighbor

Collaborative representation-based classification (CRC) is a distance based method, and it obtains the original contributions from all samples to solve the sparse representation coefficient. We find out that it helps to enhance the discrimination in classification by integrating other distance based features and/or adding signal preprocessing to the original samples. In this paper, we propose an improved version of the CRC method which uses the Gabor wavelet transformation to preprocess the samples and also adapts the nearest neighbor (NN) features, and hence we call it GNN-CRC. Firstly, Gabor wavelet transformation is applied to minimize the effects from the background in face images and build Gabor features into the input data. Secondly, the distances solved by NN and CRC are fused together to obtain a more discriminative classification. Extensive experiments are conducted to evaluate the proposed method for face recognition with different instantiations. The experimental results illustrate that our method outperforms the naive CRC as well as some other state-of-the-art algorithms.     

A Discrete Bat Algorithm for Disassembly Sequence Planning

Based on the bat algorithm (BA), this paper proposes a discrete BA (DBA) approach to optimize the disassembly sequence planning (DSP) problem, for the purpose of obtaining an optimum disassembly sequence (ODS) of a product with a high degree of automation and guiding maintenance operation. The BA for solving continuous problems is introduced, and combining with mathematical formulations, the BA is reformed to be the DBA for DSP problems. The fitness function model (FFM) is built to evaluate the quality of disassembly sequences. The optimization performance of the DBA is tested and verified by an application case, and the DBA is compared with the genetic algorithm (GA), particle swarm optimization (PSO) algorithm and differential mutation BA (DMBA). Numerical experiments show that the proposed DBA has a better optimization capability and provides more accurate solutions than the other three algorithms.     

Charting a New Paradigm of Container Hub Port Development Policy: The Asian Doctrine

This paper proposes the conceptual model of the Asian (Port) Doctrine to explain the successful development of top ranking container ports in Asia during the past four decades. This paper draws a new paradigm for the role of government as a third governance approach in addition to Anglo-Saxon and European doctrines by describing how Asian countries have developed container hub ports by investing in infrastructure as social overhead capital to support export-led growth. We survey characteristics and outcomes in major Asian container port developments and one European port in terms of a port development policy. The findings are presented in a comparative overview of government investment in functional elements of port, maritime infrastructure and landside connections to container ports. This paper confirms that the existing two doctrines—Anglo-Saxon and European doctrines—are not sufficient to explain the Asian success in major container port developments. The proposed framework contends that a newly proposed Asian Doctrine can accomplish this with the help of cross-subsidization, strategic and administered port pricing mechanism.     

Incorporating e-Technology to Advantage in a Greener Taxi Industry and its Impact on Driving Performance and Safety

Abstract

New technologies, especially advances in telecommunications, have had profound impacts on everyday life and brought even greater changes to some business models. Taxis represent one of the major modes of transportation in urban areas but they face a number of problems, including their environmental impacts. The status of the taxi industry in Taiwan is revealed and analyzed in this study. A new business model for the extensive and popular use of smart phones is proposed. However, it is important to know whether their use is both effective and safe. Two field experiments were executed to examine the effects on taxi drivers of using a navigation system installed in a GPS PDA phone. The results revealed that the efficiency of drivers using such a portable navigation system was better than those relying on paper maps in unfamiliar urban areas. Furthermore, performance in terms of safety was also better than those who used an on-board navigation system. In summary, incorporating e-technology can promote a taxi company's competitiveness and a driver's performance and safety as well as offer environmental benefits.     

Node-based scheduling method for easy migration from CAN to FlexRay in in-vehicle networking systems

As vehicles become more intelligent, in-vehicle networking (IVN) systems such as controller area network (CAN) are essential for the convenience and safety of drivers. To expand the applicability of IVN systems, attention is currently being focused on chassis networking systems that require increased network capacity and real-time capabilities. FlexRay was developed to replace CAN protocol in chassis networking systems, to remedy the shortage of transmission capacity and unsatisfactory real-time transmission delay of conventional CAN. However, FlexRay network systems require a complex scheduling method, which is a barrier to their implementation as chassis networking systems. In particular, if we want to migrate from a CAN network to a FlexRay network using the well-defined CAN message database, which has been specifically constructed for chassis networking systems by automotive vendors, a new type of scheduling method is necessary to reduce scheduling efforts during the software development process. This paper presents a node-based scheduling method for easy migration from a CAN network to a FlexRay network system. To demonstrate the feasibility of the technique, its performance is evaluated in terms of various software complexity indices.     

Urea-SCR system optimization with various combinations of mixer types and decomposition pipe lengths

The demand for NO_x after-treatment system has increased dramatically due to the stricter NO_x emission regulations for diesel vehicles. The urea-SCR system is one of the NO_x after-treatment methods found to be quite effective to meet the regulation requirement enforced by various authorities including the Euro-6. In order to develop an effective urea-SCR system, it is critical to establish an even distribution of reductant over the catalyst surface since this favorable distribution can increase reduction reaction and in turn, improve NO_x conversion efficiencies. In the current study, a number of design variations of the urea-SCR system which included two mixer types and three decomposition pipe lengths, were evaluated systematically using CFD analysis and experimental measurements. The purpose of the CFD analysis was to estimate the distribution of reductant within the urea-SCR system with a specific configuration and the purpose of the engine emission test was to measure the amount of NO_x reduction, respectively. The results from the systematic analysis revealed the relation between the reductant distribution over the SCR and the performance of the NO_x reduction.     

Simulation of flow in diesel particulate filter system using metal fiber filter media

Metal fiber is introduced as a new filter media in wall-flow Diesel Particulate Filter (DPF) system. This technology has high temperature durability which is required for filter regeneration, and can maintain the mechanical strength even in the extreme exhaust-related vibrations of vehicles. However, the regeneration near the wall (outer layer) is more difficult because of the heat loss and reduced gas flow near the wall. In this study, a flow is simulated to determine the flow control method for the more uniform flow in all filter layer. By using Star CCM+ commercial software, we obtain local velocity, streamline, and pressure distributions in the filter, which are typically difficult to obtain from measurements. The major control factors are the filter porosity, size and location of the distribution plate, and the number of blades of the swirler. By placing the distribution plate in front of the filter, the flow velocity near the wall was increased. The optimum location and size of the flat plate were chosen. By attaching the blade on the plate the flow velocity near the wall was increased more. Therefore, the regeneration efficiency is increased by using the swirler-type metal fiber DPF system.