Vehicle stability control based on driver’s emergency alignment intention recognition

In this work, the reference model modification strategy for vehicle stability control based on driver's intention recognition under emergent obstacle avoidance situation was proposed. First the conflicts between the driver's emergency alignment (EA) intention and vehicle response characteristics were analyzed in critical emergent obstacle avoidance situation. Second combining steering wheel angle and its speed, the driver's EA intention was recognized. The reference model modification strategy based on steering operation index (SOI) was presented. Then a LQR model following controller with tire cornering stiffness adaption was used to generate direct yaw moment for tracking modified reference yaw rate and reference sideslip angle. Finally based on the four-in-wheel-motor-drive (FIWMD) electric vehicles (EV), double lane change and slalom tests were conducted to compare the results using modified reference model with the results using normal reference model. The experimental tests have proved the effectiveness of the reference model modification strategy based on driver's intention recognition.     

Hydraulic retarders for heavy vehicles: Analysis of fluid mechanics and computational fluid dynamics on braking torque and temperature rise

Hydraulic retarders are auxiliary braking devices that reduce the velocity of a vehicle, particularly when a vehicle is driven downhill. Such velocity reduction could reduce the potential risk caused by brake failure caused by the service brake working for a long time and the temperature of the brake shoe becomes extremely high. This paper introduces the construction of the hydraulic retarder and proposes two mathematical models for the hydraulic retarder. The first mathematical model is deduced by using fluid mechanics, which is used to analyze the mechanism of how braking torque is produced and the key factors that can influence the value of the braking torque. The second mathematical model is deduced by using thermodynamics, which is used to quantify the heat produced by the hydraulic retarder. This research emphasizes that the flow rate and the average velocity of the working fluid in the working chamber mainly determine the braking torque of the hydraulic retarder. The flow rate into and out of the working chamber determines the temperature rise of the working fluid. Computational fluid dynamics (CFD) simulations are conducted with the Reynolds-averaged Navier-Stokes (RANS) and Shear Stress Transport (SST) turbulent models. Experiments are carried out to justify the two mathematical models and the CFD simulations. The results show that the mathematical models are capable of describing the force analysis and energy conversion of the hydraulic retarder and SST is more accurate for CFD simulation and the error is within 6 %.     

Effectiveness of ECE R66 and FMVSS 220 standards in rollover crashworthiness assessment of paratransit buses

The main objective of the presented study was to compare the effectiveness of two standard test procedures for evaluating bus roof integrity: the dynamic rollover test according to UN-ECE Regulation 66 (ECE-R66), and the quasi-static symmetric roof loading according the Federal Motor Vehicle Safety Standard 220 (FMVSS 220). Both tests were applied to a selected Paratransit Bus. The investigation was carried out primarily using a numerical study backed up by experimental validation tests on components and full scale rollover tests. A sensitivity analysis using LS-OPT? was performed to identify the most important structural components influencing the response of the bus in these two tests. The results obtained from this study show that the final outcome of the crashworthiness assessment of the selected paratransit bus depends on the selection of the evaluation standard. Although the two tests are used for the same purpose of roof integrity evaluation, their results are divergent and may lead to different conclusions. The paper presents a discussion on the effectiveness of both standards in evaluating the rollover crashworthiness.     

Further aspects of rectangular routeing in Smeed's City

Two types of routeing on a rectangular system of roads are examined in a simple circular city where homes and workplaces are uniformly and independently distributed. Expressions for the number of vehicles crossing a given line segment, the average distance travelled by a commuter and the total number of crossings of vehicle paths in the city are derived. Comparisons are made with other routeing systems in terms of average distance travelled, expected number of crossings and average travel time.     

Iterative Learning Control Algorithm for Feedforward Controller of EGR and VGT Systems in a CRDI Diesel Engine

The modern diesel engines equip the exhaust gas recirculation (EGR) system to suppress the NOx emissions. In addition, the variable geometric turbocharger (VGT) system is installed to improve the drivability and fuel efficiency. These EGR and VGT systems have cross-coupled behavior because they interact with the intake and the exhaust manifolds. Furthermore, the turbocharger time delay, gas flow dynamics through EGR pipe cause the nonlinearity characteristics. These nonlinear multi-input-multi-output characteristics cause the degradation of control accuracy, especially during the transient condition. In order to improve the control accuracy, this study proposes an iterative learning control (ILC) algorithm for feedforward controller of EGR and VGT systems. The feedforward controller obtains the values about EGR and VGT actuators using the previous control results in predefined transient states. The ILC algorithm consists of a PD-type learning function and a low-pass filter. The control gains of learning function are determined to guarantee the convergence of learning results. In addition, the low-pass filter is designed for robustness against plant disturbance. The proposed control algorithm was validated by engine experiment which repeated predefined transient states. The error was reduced by 15 % according to the gain. As a result, the proposed algorithm is affordable for improving the transient control performance.     

Comparing Fisher Interviews,Logbooks, and Catch Landings Estimates of Extraction Rates in a Small-Scale Fishery

Researchers are turning to alternative data sources (e.g., resource user knowledge) to provide information required for wildlife management. Little is known about the reliability of data elicited from resource users relative to data obtained from user-independent approaches (e.g., observations of fish catches). We test for consensus among three methods that quantify past (1996 to 2007) seahorse catch-per-unit-effort (CPUE) for a small-scale, data-poor fishery in the Philippines: interviews with fishers about good, bad, and typical catch; fisher logbooks; and observations of catch landings. Interviews and logbooks indicated no trends in CPUE through time, consistent with results from the fisher-independent metric, catch landings. Although interview estimates of “typical” CPUE greatly exceeded “typical” observed catches and logbook estimates, interview estimates of “bad” CPUE were comparable. Catch landings estimates for a fisher in a particular year were uncorrelated to what he reported during retrospective interviews. Interviews should be used cautiously to inform specific catch targets (e.g., total allowable catches), although including interview questions about a range of catch experiences (e.g., good, bad and typical), may improve interview-derived data. Logbooks are particularly useful for capturing information about fishing expeditions that produce no fish, which are largely missed by other methods.     

Autonomous Emergency Braking Considering Road Slope and Friction Coefficient

The Autonomous Emergency Braking (AEB) systems have been actively studied for the safety enhancement and commercialized for the past few years. Because the driver tends to overly rely upon active safety systems, AEB needs to be designed to reflect the real road situations such as various road slope and friction coefficient. In this study, an AEB control algorithm is proposed to compensate for the effects of the slope and the friction of road. Based on the maximum possible deceleration for the real road conditions, the minimum braking distance is described with margin parameters for AEB activation control. The deceleration controller with a feedforward term is designed to avoid the collision during AEB operation on real road conditions. The proposed algorithm is validated in simulations first and the experimental verification is performed in the various slope conditions.     

Development of a Driving Behavior-Based Collision Warning System Using a Neural Network

An advanced driver assistance system (ADAS) uses radar, visual information, and laser sensors to calculate variables representing driving conditions, such as time-to-collision (TTC) and time headway (THW), and to determine collision risk using empirically set thresholds. However, the empirically set threshold can generate differences in performance that are detected by the driver. It is appropriate to quickly relay collision risk to drivers whose response speed to dangerous situations is relatively slow and who drive defensively. However, for drivers whose response speed is relatively fast and who drive actively, it may be better not to provide a warning if they are aware of the collision risk in advance, because giving collision warnings too frequently can lower the reliability of the warnings and cause dissatisfaction in the driver, or promote disregard. To solve this problem, this study proposes a collision warning system (CWS) based on an individual driver’s driving behavior. In particular, a driver behavior model was created using an artificial neural network learning algorithm so that the collision risk could be determined according to the driving characteristics of the driver. Finally, the driver behavior model was learned using actual vehicle driving data and the applicability of the proposed CWS was verified through simulation.     

Component Sizing of Parallel Hybrid Electric Vehicle Using Optimal Search Algorithm

In designing a parallel hybrid electric vehicle, it is essential to select the optimal capacity of power sources and the optimal gear ratio of the torque coupler. The capacity of the power sources and the gear ratio of the torque coupler should be optimized simultaneously. However, since this process is excessively time-consuming, previous studies have selected the gear ratio of the torque coupler and then selected the capacity of power source. However, this approach cannot guarantee global optimization. In this paper, a feasible region is defined to satisfy the required performance of vehicle such as maximum speed, hill-climbing. and feasible points are selected inside the feasible region. In the conventional technique, the global optimal solution is obtained by simulating all feasible points. In the optimization technique, optimal points are simulated within the feasible region using several optimal search algorithms, such as the golden section search algorithm and the hillclimbing search algorithm. And using these algorithms, the number of simulations is reduced and the capacity of the power source and the gear ratio of the torque coupler are optimized simultaneously. Finally, the validity of the component sizing results is verified by comparing the global optimal solution obtained by applying the conventional technique with the solution obtained by applying the proposed optimization technique.     

Load Transfer Analysis of a Bus Bay Section Under Standard Rollover Test Using <Emphasis Type="Italic">U</Emphasis>*<Subscript>M</Subscript> Index

Bus rollover accidents are receiving increasing attention due to the associated high fatality rate. In order to improve the bus structural performance during the rollover collision, it is necessary to investigate how the impact force is transferred within the bus superstructure. This paper introduced a method for studying the load transfer behavior of the bus superstructure during the standard rollover test by using the U * _M index. A bus bay section was used as the sample structure to demonstrate the proposed method. The result of the paper reveals that the load transfer analysis based on the U * _M index can provide engineers with the insight of the structural issues and the direction to improve the structural performance, which cannot be accomplished through the conventional finite element analysis.