Highway Tunnel Blasting Vibrations and Cracking of Adjacent Residential Houses北大核心CSCD

A systematic analysis and discussion of the causes of house cracking are conducted by testing the blast vibration velocity of typical neighboring houses, analyzing the types of house cracking, monitoring the characteris-tics of house cracks and calculating the temperature stress at the roof and wall based on an assessment of highway tunnel blasting vibrations leading to cracking of neighboring houses. The results show that the main cause of house cracking adjacent to the tunnel is temperature stress, not blasting vibration. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Surrounding Rock Classification of Banxi Group Slate with Abundant Water北大核心CSCD

For water-rich slate, surrounding rock argillization and softening is a serious problem. At present the uni-axial saturated compressive strength of rock is used as one of the indexes for classification of water-rich slate sur-rounding rock. Since Banxi Group slate has special geological characteristics, the above mentioned grading index is not completely suitable for its surrounding rock classification due to limitations. For this reason, using the Youfang-ping tunnel at the Changsha to Kunming Section of the Shanghai to Kunming high-speed railway in China as an ex-ample, a softening coefficient is introduced, and the underground water, rock mass integrity coefficient and angle of the main structural surface and tunnel axis are regarded as the main controlling factors. A system of surrounding rock classification for tunnels in water-rich slate is established. Based on the theory of fuzzy mathematics, the member-ship function of each index is structured and the weight of each index is calculated by AHP, and the grade of the sur-rounding rock is determined according to the maximum membership degree principle. The results show that the fuzzy information of surrounding rock classification is processed effectively and the classification of surrounding rock is achieved by qualitative analysis to quantitative evaluation by using fuzzy theory. The surrounding rock classification determined by introducing the softening coefficient on the basis of fuzzy theory is close to that determined in practical application, indicating that the practicability of this classification of tunnel surrounding rock in water-rich slate is high. This classification system therefore is a reference for the design and construction of tunnels in water-rich slate. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Global Fish Trade,Prices, and Food Security in an African Coral Reef Fishery

This study evaluated the potential impact of global fish trade on local food prices by analyzing a 16-year locally collected time series of disaggregated coral reef fish products and prices that differed in their market chain linkages—ranging from local to international markets. We were primarily interested in evaluating how local and global markets interacted with the local prices of beef, fish, and maize. There was no cointegration between the prices of exported octopus and that of maize and beef over this study period. Further, the three types of fish and associated markets responded in different ways to various price changes. For internationally traded octopus, we found a positive association between price and catch rates but no evidence that the global trade in octopus markets created local inflation, particularly the prices of the fish eaten by the poor. In general, there was no evidence for price transmission from export to nonexport fish products even though fishers appeared to focus on octopus when prices were high. Consequently, fishers' behaviors and trade policies that promote adjusting fishing effort to internationally traded fish did not appear to promote poverty or food insecurity in this fishery.     

Estimating the trip generation impacts of autonomous vehicles on car travel in Victoria,Australia

Autonomous vehicles (AVs) potentially increase vehicle travel by reducing travel and parking costs and by providing improved mobility to those who are too young to drive or older people. The increase in vehicle travel could be generated by both trip diversion from other modes and entirely new trips. Existing studies however tend to overlook AVs’ impacts on entirely new trips. There is a need to develop a methodology for estimating possible impacts of AVs on entirely new trips across all age groups. This paper explores the impacts of AVs on car trips using a case study of Victoria, Australia. A new methodology for estimating entirely new trips associated with AVs is proposed by measuring gaps in travel need at different life stages. Results show that AVs would increase daily trips by 4.14% on average. The 76+ age group would have the largest increase of 18.5%, followed by the 18–24 age group and the 12–17 age group with 14.6 and 11.1% respectively. If car occupancy remains constant in AV scenarios, entirely new trips and trip diversions from public transport and active modes would lead to a 7.31% increase in car trips. However increases in car travel are substantially magnified by reduced car occupancy rates, a trend evidenced throughout the world. Car occupancy would need to increase by at least 5.3–7.3% to keep car trips unchanged in AV scenarios.     

The role of VMT reduction in meeting climate change policy goals

This article evaluates the case for vehicle miles traveled (VMT) reduction as a core policy goal for reducing greenhouse gases (GHGs), concluding the economic impacts and social consequences would be too severe given the modest potential environmental benefits. Attempts to reduce VMT typically rely on very blunt policy instruments, such as increasing urban densities, and run the risk of reducing mobility, reducing access to jobs, and narrowing the range of housing choice. VMT reduction, in fact, is an inherently blunt policy instrument because it relies almost exclusively on changing human behavior and settlement patterns to increase transit use and reduce automobile travel rather than directly target GHGs. It also uses long-term strategies with highly uncertain effects on GHGs based on current research. Not surprisingly, VMT reduction strategies often rank among the most costly and least efficient options. In contrast, less intrusive policy approaches such as improved fuel efficiency and traffic signal optimization are more likely to directly reduce GHGs than behavioral approaches such as increasing urban densities to promote higher public transit usage. As a general principle, policymakers should begin addressing policy concerns using the least intrusive and costly approaches first. Climate change policy should focus on directly targeting greenhouse gas emissions (e.g., through a carbon tax) rather than using the blunt instrument of VMT reduction to preserve the economic and social benefits of mobility in modern, service-based economies. Targeted responses are also more cost effective, implying that the social welfare costs of climate change policy will be smaller than using broad-brushed approaches that directly attempt to influence living patterns and travel behavior.     

Method for analyzing epicyclic gearboxes

This paper presents a method for analyzing epicyclic gearboxes by evaluating the speeds, torques and power of the external elements in epicyclic gear mechanisms, as well as the total ratios of the gear box. The method is based on the equations that describe each epicyclic gear mechanism and rules that assign appropriate codes to the external elements. The method emphasizes how power flows are transmitted through the epicyclic gears, as well as power losses. Analysis of an epicyclic gear box is performed to illustrate the proposed method.     

The utilisation and user characteristics of Uber services in London

ABSTRACT

Ridesourcing services such as Uber are nowadays a common feature within available transport options of many cities around the world (E.g. London & San Francisco). There has been much publicity about the potential impacts of ridesourcing services and how (or if) they should be managed or regulated without an objective understanding of who uses these services and why, as well as its current and future implications for public transport (PT).

Ridesourcing is part of a broader tech-driven, mobile app-based sharing phenomenon – the ‘sharing economy’ – which has disrupted traditional market models and industries, for example, the transport industry, where new players such as Uber have emerged and have quickly become part of the urban transport landscape. Uber has been at the forefront in disrupting the transport sector since its first launch in 2010 (San Francisco, USA). Since its launch, Uber has generated extensive media coverage and debate among policymakers, transport planners and transport authorities on how these services are affecting traditional transport modes such as buses and taxis. However, without objective empirical data – in terms of impacts on trip making characteristics, PT ridership and congestion – policymakers and transport regulators are yet to fully understand the real impacts ridesourcing services are having on the transport network.

This paper is part of broader research that aims to provide insights and empirical-based evidence on how Uber services are used (UberX and Uberpool) in London. A comprehensive survey was undertaken using a detailed questionnaire, issued to UberX and Uberpool users in London to gather detailed data on who uses the Uber services, why they use it and what are the trip purposes, in order to understand Uber user demographics and what effects (if any) Uber services are having on PT usage and trip making characteristics in London. The final findings provide important insights on Uber user demographics, trip purposes, types of trips replaced, impact on car ownership and why travellers use Uber services.     

The Circumferential Contact Problem for the Belted Radial Passenger Car Tire

The belted radial passenger car tire is idealized as a prestressed circular ring connected to a hub through a distribution of linear springs modeling the sidewall. A second distribution of such springs exterior to the ring represents the tread rubber. The tire is supposed to be at rest, loaded at its hub, and pressed onto a flat, rigid, frictiontess roadway. In this situation the linear differential equations of the model are solved using a singular perturbation technique. Given the load at the hub, the solutions furnish the length of tread in contact with the road, the radial and circumferential displacement of all points on the ring, and the distribution of pressure over the region of contact.