Dynamic analysis of energy storage unit of the hydraulic hybrid vehicle

A new configuration of hydraulic hybrid vehicle (HHV) was presented, which mainly consists of an engine, high-pressure accumulator, lower-pressure reservoir and hydraulic transformer (HT) connected to common pressure rail (CPR), and the working principle of hydraulic hybrid vehicle has been described to extend its energy-regenerated potential. Moreover, the mathematical models of the instantaneous pressure ratio of HT and the characteristic parameters of parallel and series accumulator (i.e. effective volume, specific energy, and charge-discharge efficiency) based on lumped parameters method were built, respectively. The simulation and experimental tests of dynamic characteristics of HT and accumulator were done, the result shows that the theoretical analysis was the same as the experimental results by comparing them in the curve trend, and the series accumulator was much superior to parallel accumulator in terms of pulsation damping of hydraulic transformer, that is the simulation results reasonably and appropriately.     

Comparison of the stress distributions of liquid gas road tankers with various configurations during braking, cornering, and vertical bump maneuvers

This paper compares the stress and displacement distributions of different head-shell junction configurations in LPG road tankers during different vehicle design maneuvers, such as braking, cornering, and vertical bumps, for the first time. Various combinations of heads (e.g., spherical and toroidal) and shell cross sections (circular and elliptical) are considered. The ABAQUS finite element software is used to model and analyze the fluid-filled tankers. The results show that the most critical maneuver affecting the fluid-filled tankers is cornering and the safest maneuver is braking. Moreover, the results reveal that the outer surface of the tanker generally behaves the most critically in all maneuvers, and cylindrical tankers with smaller cross-sections behave more acceptably compared to those with larger cross-sections. Among fluid-filled vehicle tankers with identical platform areas, tankers with elliptical cross-sections behave the most acceptably.     

Systems-on-chip approach for real-time simulation of wheel–rail contact laws

This paper presents the development of a systems-on-chip approach to speed up the simulation of wheel–rail contact laws, which can be used to reduce the requirement for high-performance computers and enable simulation in real time for the use of hardware-in-loop for experimental studies of the latest vehicle dynamic and control technologies. The wheel–rail contact laws are implemented using a field programmable gate array (FPGA) device with a design that substantially outperforms modern general-purpose PC platforms or fixed architecture digital signal processor devices in terms of processing time, configuration flexibility and cost. In order to utilise the FPGA's parallel-processing capability, the operations in the contact laws algorithms are arranged in a parallel manner and multi-contact patches are tackled simultaneously in the design. The interface between the FPGA device and the host PC is achieved by using a high-throughput and low-latency Ethernet link. The development is based on FASTSIM algorithms, although the design can be adapted and expanded for even more computationally demanding tasks.     

Co-management of Tropical Coastal Zones: The Case of the Soufriere Marine Management Area,St. Lucia,WI

Centralized, top-down fisheries management models based on biological stock-recruitment have, at best, achieved limited success when adapted to Third World fisheries. Comanagement, a resource management approach oriented towards resource users and their communities, has been proposed as an alternative strategy for managing Third World fisheries. We examine the initial success and subsequent problems of one such collaborative coastal zone management project on St. Lucia's leeward coast. Factors that must be considered in the development, implementation, and maintenance of coastal comanagement systems operating in the contexts of tropical marine ecosystems in developing nations are identified and discussed.     

Public Stakeholders' Perception of ICZM and Coastal Erosion in the Mediterranean

The Mediterranean area plays a pivotal role within the definition and implementation of regional strategies for integrated coastal zone management (ICZM). Under the umbrella of the Regional Framework Operation BeachMed-e, a research project was carried out in five Mediterranean EU regions (East Macedonia and Thrace in Greece, Lazio, Liguria, and Emilia Romagna in Italy and Languedoc-Roussillon in France), in order to study the different approaches to ICZM that have been applied and also to test new approaches to these regions. The aim of this article is to present and discuss the results of the common surveys conducted in order to investigate the institutional stakeholders’ perception on ICZM in the five Mediterranean regions considered. The results are presented region by region, while comparisons are carried out among regions. Summarizing the results it can be stated that some differences and common problems affecting the coastal decision-makers of the five Mediterranean regions considered were identified. Particularly, stakeholders involved in coastal management generally perceived a lack of collaboration and a poor information exchange in all the regions, resulting sometimes in a lack of awareness on coastal erosion issues.     

Numerical analysis of cavitating propeller and pressure fluctuation on ship stern using a simple surface panel method “SQCM”

This paper presents a calculation method for the pressure fluctuation induced by a cavitating propeller. This method consists of two steps: the first step is the calculation of propeller sheet cavitation, and the second step is the calculation of pressure fluctuation on the ship stern. It is for practicality that we divide the method into two steps but do not calculate these steps simultaneously. This method is based on a simple surface panel method “SQCM” which satisfies the Kutta condition easily. The SQCM consists of Hess and Smith type source panels on the propeller or cavity surface and discrete vortices on the camber surface according to Lan’s QCM (quasi-continuous vortex lattice method). In the first step, the cavity shape is solved by the boundary condition based on the free streamline theory. In order to get the accurate cavity shape near the tip of the propeller blade, the cross flow component is taken into consideration on the boundary condition. In the second step, we calculate the cavitating propeller and the hull surface flow simultaneously so as to calculate the pressure fluctuation including the interaction between the propeller and the hull. At that time, the cavity shape is changed at each time step using the calculated cavity shape gotten by the first step. Qualitative agreements are obtained between the calculated results and the experimental data regarding cavity shape, cavity volume and low order frequency components of the pressure fluctuation induced by the cavitating propeller.     

Optimizing shipping company operations using business process modelling

In order to identify the elements constituting quality in services, a business process modelling methodology has been applied in the case of a Greek liner shipping company. The company operations have been identified and analysed in order to assess the complete performance of service elements and thereafter identify how to match the service performance against the user requirements. A liner container service within Europe has to compete with the road transport which, in many cases, is an alternative to the sea transportation and not complementary to it. Thus, not only the ship has to be envisaged when aiming to improve quality in services but also the whole chain, namely port authorities, land transportation enterprises, subcontractors, agents, charterers and others. A set of potential improvements within this framework are thus suggested and time and cost (examined in a specific voyage scenario) are measured before and after the implementation of these measures. Very large time and cost savings are observed after the application of the technology improvements, allowing, in fact, the shipping company to even increase the number of round trips per year in the examined route. This indicates that very large benefits can be drawn by analysing and critically adjusting business processes in modern shipping companies.     

Optimizing the transportation of international container cargoes in Korea

This paper considers a multimodal transportation problem, which is the problem of determining the transportation flow, i.e. volume of container cargoes, and the transportation mode in each trade route, for the objective of minimizing the sum of shipping and inland transportation costs. The problem takes account of two restrictions: maximum cargo volumes capacitated at each seaport and maximum number of vehicles available at each transportation mode. To solve optimally the problem, this paper employs a mixed integer programming, which is an operations research technique. A case study is performed on the container cargo data in Korea and we draw several implications to improve efficiency in the transportation of international trade cargoes in Korea.     

耦合非线性三维海洋立管的边界控制(英文)

This paper presents a design of boundary controllers implemented at the top end for global stabilization of a marine riser in a three dimensional space under environmental loadings. Based on the energy approach, nonlinear partial differential equations of motion, including bending-bending and longitudinal-bending couplings for the risers are derived. The couplings cause mutual effects between the three independent directions in the riser’s motions, and make it difficult to minimize its vibrations. The Lyapunov direct method is employed to design the boundary controller. It is shown that the proposed boundary controllers can effectively reduce the riser’s vibration. Stability analysis of the closed-loop system is performed using the Lyapunov direct method. Numerical simulations illustrate the results.