轨道车辆直流牵引电机噪声的分析与研究

本文在城市轨道车辆牵引电机噪声测试的基础上,分析了牵引电机噪声的产生机理和频率分布以及对室内外环境的影响和传播途径。最后提出了牵引电机的降噪措施。     

LOSS OF NUCLEUS BASALIS MAGNOCELLULARIS，BUT NOT SEPTAL，CHOLINERGIC NEURONS CORRELATES WITH PASSIVE AVOIDANCE IMPAIRMENT IN RA

ＬＯＳＳＯＦＮＵＣＬＥＵＳＢＡＳＡＬＩＳＭＡＧＮＯＣＥＬＬＵＬＡＲＩＳ，ＢＵＴＮＯＴＳＥＰＴＡＬ，ＣＨＯＬＩＮＥＲＧＩＣＮＥＵＲＯＮＳ　ＣＯＲＲＥＬＡＴＥＳＷＩＴＨＰＡＳＳＩＶＥＡＶＯＩＤＡＮＣＥＩＭＰＡＩＲＭＥＮＴＩＮＲＡＴＳＴＲＥＡＴＥＤ　ＷＩＴ...     

Experimental investigations on the damping effect due to passengers on flexural vibrations of railway vehicle carbody and basic studies on the mimicry of the effect with simple substitutions

The effect of passengers on a railway vehicle is usually considered as additional mass in designing a carbody. However, previous studies by means of stationary excitation tests or running tests using actual vehicles indicate that passengers behave not as mass but as damping. In this paper, the authors examined the passengers' damping effect under controlled excitation conditions on a roller rig through a series of excitation tests using a commuter-type vehicle. Large and multi-modal reductions of flexural vibrations of the carbody were observed when passengers existed. Influences of the number of passengers, distributions and postures of passengers were investigated. The authors also tried to mimic the damping effect by passengers using flexible tanks filled with fluids. Three kinds of fluids which have different viscosities have been tested. As a result of the excitation tests, good vibration reduction effects were observed by applying those tanks, and it has been found that the flexible tanks filled with fluids bring about vibration reduction effect (including multi-modal reduction) which is equal to or rather better than the case of similar mass of passengers in the carbody; the difference of viscosity gave little affect on the damping abilities. From these measurement results, a possibility of realising effective damping devices against flexural vibrations of railway vehicle carbodies representing passengers damping effect, in a simple, economical and environmental friendly way, has been demonstrated.     

Calibration efficiency improvement of rule-based energy management system for a plug-in hybrid electric vehicle

This paper presents a calibration method of a rule-based energy management strategy designed for a plug-in hybrid electric vehicle, which aims to find the optimal set of control parameters to compromise within the conflicting calibration requirements (e.g. emissions and economy). A comprehensive evaluating indicator covering emissions and economy performance is constructed by the method of radar chart. Moreover, a radial basis functions (RBFs) neural network model is proposed to establish a precise model within the control parameters and the comprehensive evaluation indicator. The best set of control parameters under offline calibration is gained by the multi-island genetic algorithm. Finally, the offline calibration results are compared with the experimental results using a chassis dynamometer. The comparison results validate the effectiveness of the proposed offline calibrating approach, which is based on the radar chart method and the RBF neural network model on vehicle performance improvement and calibrating efficiency.     

Performance decay of stern bearing based on lubrication numerical model and state parameters北大核心CSCD

[目的]为了实现对船舶艉轴承润滑状态的监测和评估,提出一种结合润滑性能衰变模型和支持向量机(SVM)算法的艉轴承润滑性能评估方法。[方法]针对船舶艉轴承润滑状态难以监测和识别的问题,建立轴承润滑衰变数值模型,并运用实验数据对该模型进行验证,研究载荷、粗糙度和半径间隙对润滑状态衰变机理的影响。基于SVM算法,构建润滑状态分类器,通过网格搜索算法优化超参数,利用不同润滑状态的数据集进行训练,最后实现对艉轴承润滑状态的评估。[结果]结果显示,随着外部载荷、粗糙度和半径间隙的增大,轴承润滑状态恶化的临界速度增大,动压润滑工作范围减小,混合润滑工作范围增大;由仿真数据集对润滑状态识别模型的验证表明,所提的润滑状态识别方法准确率达96.88%。[结论]所提方法能监测轴承的润滑性能特征,有效识别轴承的润滑状态。     

采用自动识别系统对水下输气管线、离岸平台和船舶检验评分的实时监测（英文）

The aim of this research is to develop an algorithm and application that can perform real-time monitoring of the safety operation of offshore platforms and subsea gas pipelines as well as determine the need for ship inspection using data obtained from automatic identification system(AIS). The research also focuses on the integration of shipping database,AIS data, and others to develop a prototype for designing a real-time monitoring system of offshore platforms and pipelines. A simple concept is used in the development of this prototype, which is achieved by using an overlaying map that outlines the coordinates of the offshore platform and subsea gas pipeline with the ship's coordinates(longitude/latitude) as detected by AIS. Using such information, we can then build an early warning system(EWS) relayed through short message service(SMS), email, or other means when the ship enters the restricted and exclusion zone of platforms and pipelines. The ship inspection system is developed by combining several attributes. Then, decision analysis software is employed to prioritize the vessel's four attributes, including ship age, ship type, classification, and flag state.Results show that the EWS can increase the safety level of offshore platforms and pipelines, as well as the efficient use of patrol boats in monitoring the safety of the facilities. Meanwhile, ship inspection enables the port to prioritize the ship to be inspected in accordance with the priority ranking inspection score.     

Vehicle mass as a determinant of fuel consumption and secondary safety performance: A comment

Attention is called to evidence that in collisions between vehicles of equal mass, and in single-vehicle collisions, there is unlikely to be a very strong effect of car size on injury severity, and that variation in crashworthiness within the set of car models of a given size has a much larger effect. Consequently, the secondary safety of a national fleet of small cars in the future could be as high as that of a national fleet of large cars today.     

Synoptic transects on the distribution of trace elements (Hg,Pb, Cd,Cu, Ni,Zn, Co,Mn, Fe,and Al) in surface waters of the Northern- and Southern East Atlantic

Surface seawater samples were taken in the framework of the GEOTRACES program on “POLARSTERN” expedition ANT XXIII/1 in the Eastern Atlantic in 2005 to study the distribution of the trace elements Hg (mercury), Pb (lead), Cd (cadmium), Cu (copper), Ni (nickel), Zn (zinc), Co (cobalt), Mn (manganese), Fe (iron), and Al (aluminium). With the exception of Hg, results were compared to earlier datasets from 1989 to 1990. The particulate fraction averaged over the transect was calculated to be 49% for Cd, 23% for Mn and 50% for Fe indicating a release of these TEI's (trace elements and their isotopes) from a leachable SPM fraction in the stored and acidified samples.Total Pb concentrations ranged between 5 and 20 pmol kg^? 1 in 2005 with highest values in the ITCZ (intertropical convergence zone). In 1989 Pb concentrations were twice as high in the region of the ITCZ, while by a factor of 10–15 higher values were obtained in the North Atlantic.Total Cd and Co are dominated, by different seasonal upwelling regimes (Equatorial upwelling, Guinea Dome, Angola Dome).Total Cu, Ni, Fe, Mn and Al show nearly identical concentrations in 1990 and 2005. For total manganese and aluminium strong maxima (3–4 nmol kg^? 1 and 55 nmol kg^? 1 respectively) are observed between 23°N and 0°, while the Fe maximum (6–9 nmol kg^? 1) is located at 7°N. Total Hg concentrations ranged between 0.5 and 4.5 pmol kg^? 1.     

Transportation survey and rideshare matching model for rural communities

A simple and flexible low technology rideshare matching model was developed for a rural area. A brief survey form provided information on distance to work, fuel consumption and currently used transportation mode in conj unction with information on employment location and work schedule. The model developed used a computerized system for proximity matching of potential ride sharers. An existing computer program with detailed modifications was used for data analysis. Unlike other rideshare matching programs, this model relies on grouping by community names to match riders.