遮阳棚对隧道进出口明暗适应的影响规律研究北大核心CSCD

为研究隧道进出口路段驾驶员明暗适应的特性及遮阳棚对明暗适应过程的影响规律,文章依托紫荆隧道(无遮阳棚)及巴朗山隧道(有遮阳棚)进行驾驶试验,以驾驶员瞳孔直径及其变化速率为研究参数,分析遮阳棚对隧道进出口路段明暗适应的缓冲效果。研究结果表明:暗适应过程90%以上发生在洞内段,明适应过程54.61%以上发生在洞内段;在隧道进口段暗适应过程中,通过遮阳棚时间为2 s时,最大瞳孔直径变化速率下降4.84%,通过遮阳棚时间为5 s时,最大瞳孔直径变化速率下降33.58%;在隧道出口段明适应过程中,通过遮阳棚时间为2 s时,最大瞳孔直径变化速率下降38.75%,通过遮阳棚的时间为5 s时,最大瞳孔直径变化速率下降49.97%。     

Unreliable trains and induced rescheduling: implications for cost-benefit analysis

This paper is concerned with the assessment of generalized user cost reductions in the cost-benefit analysis (CBA) of transport policies that aim at reducing unreliability. In particular, we investigate the implications of railway passengers’ anticipating departure behavior when train services were unreliable. A simple model is established to describe and predict such anticipating behavior. Our numerical example shows how travelers’ anticipating departures and scheduling costs depend on the level of unreliability. The possible bias incurred by ignoring the reliability and schedule delay costs reductions in the traditional CBA can be quite substantial. Given our assumptions and parameterization, the underestimation of ignoring these costs could range from 33 to 75% of total generalized user cost reductions.     

A Preliminary Study on the Law of Ground Settlement Caused by Shield Tunnelling Based on the Stratum Characteristic Value M S北大核心CSCD

Based on an analysis of monitoring data of surface settlement in the construction of a shield running tunnel of Beijing metro, an improved hyperbolic model was proposed to fit the ground subsidence law, and the characteris⁃ tic factor M S was used to evaluate the stratum under the condition of shield construction. The relationship between stratum parameters and surface settlement was studied, with the results indicate that the surface settlement caused by shield construction complies with hyperbolic distribution and it is basically stable at 30 days, the larger the value of M S is, the better the conditions of the stratum is and the smaller the settlement is; a certain correlation exists be⁃ tween the parameters of improved hyperbolic model and the characteristic value M S . © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Contrastive Analysis of Working Face Stability in Cases of Climbing Excavation and Horizontal Excavation北大核心CSCD

Restricted by site and construction period of ancillary structure of metro project, climbing excavation is often adopted. In order to determine tunnel face’s stability, the stabilities of working face in the cases of climbing ex- cavation and horizontal excavation were analyzed by theoretical analysis and numerical simulation. With upperbound limit analysis, the affected scope and positions of failure zone were compared; the position of equivalent strain zone and the law of horizontal displacement changes were studied by simulation analysis. The results show that the scope of failure zone caused by climbing excavation was slightly larger than that by horizontal excavation and the po- sition of affected zone is slightly lower than that by horizontal excavation; the horizontal displacement caused by climbing excavation within a scope of 0-1/3 height of tunnel face is slightly larger than that by horizontal excavation while it is slightly smaller beyond the scope of 0-1/3 height of tunnel face; the maximum horizontal displacements in the cases of climbing and horizontal excavation both occur at the place where is 1/3 height of work face and the de- formation of work face in the case of climbing excavation is not larger than that of horizontal excavation; the work face stabilities are mostly the same in the cases of climbing and horizontal excavation without regard to advanced support, and the work face stability is to be guaranteed with proper advanced support. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Optimisation and heuristic approaches for assigning inbound containers to outbound carriers

Due to economical and/or geographical constraints, most of the time overseas containers cannot be directly shipped to their destinations. These containers visit transhipment ports where they are first unloaded and temporarily stored and then loaded onto smaller vessels (feeders) to be transported to their final destinations. The assignment of these containers to outbound vessels necessitates several factors to be taken into account simultaneously. In this paper, we develop a mathematical model to reflect multiple objectives with priorities and to assign these containers to different vessels at the transit container port terminal. Although we solve a single-objective (with the weighted sum of objectives) mathematical model to optimality, we also propose two heuristic approaches to solve this complex problem for a transit agency. The first heuristic is shipment based and has four variants differing in how the opportunity costs of the assignments are calculated. The second greedy heuristic is trip based, where the goal is to maximise the capacity utilisation of the vessels. The heuristics return very promising solutions in ignorable computational times. We also provide real-life cases and present our conclusions.     

A multi-instrumented approach to observing the activity rescheduling decision process

Activity scheduling simulation models represent an emerging and proposing approach to forecasting travel demand. The most significant developmental challenge is the lack of empirical data on how people actually proceed through the scheduling and conflict resolution process. This paper develops a new methodology to collect data about the rescheduling decision process. The data collection involves six stages: preplanned schedule interview, coding of the preplanned schedule, second-by-second Global Positioning System tracking, internet-based prompted recall diary, detection of rescheduling decisions (via comparison of planned versus executed activities), and a final in-depth interview probing the how and why of rescheduling decisions. Each stage of the methodology is described in detail with example results drawn from a pilot study. Key discoveries include: elicitation of multiple preplanned schedule reporting methods (verbal, point-form, calendar); discovery that activity attributes (time, location, involved persons) are planned on significantly different time horizons and include partial elaboration; and provision of new insights into how and why rescheduling decisions are made. A method for automatically tracking rescheduling decisions was also discovered. Overall, the new methodology has potential to contribute to the development of more realistic models of the entire scheduling process, especially rescheduling and conflict resolution sub-models.     

A structural analysis of vehicle design responses to Corporate Average Fuel Economy policy

The US Corporate Average Fuel Economy (CAFE) regulations are intended to influence automaker vehicle design and pricing choices. CAFE policy has been in effect for the past three decades, and new legislation has raised standards significantly. We present a structural analysis of automaker responses to generic CAFE policies. We depart from prior CAFE analyses by focusing on vehicle design responses in long-run oligopolistic equilibrium, and we view vehicles as differentiated products, taking demand as a general function of price and product attributes. We find that under general cost, demand, and performance functions, single-product profit maximizing firm responses to CAFE standards follow a distinct pattern: firms ignore CAFE when the standard is low, treat CAFE as a vehicle design constraint for moderate standards, and violate CAFE when the standard is high. Further, the point and extent of first violation depends upon the penalty for violation, and the corresponding vehicle design is independent of further standard increases. Thus, increasing CAFE standards will eventually have no further impact on vehicle design if the penalty for violation is also not increased. We implement a case study by incorporating vehicle physics simulation, vehicle manufacturing and technology cost models, and a mixed logit demand model to examine equilibrium powertrain design and price decisions for a fixed vehicle body. Results indicate that equilibrium vehicle design is not bound by current CAFE standards, and vehicle design decisions are directly determined by market competition and consumer preferences. We find that with increased fuel economy standards, a higher violation penalty than the current stagnant penalty is needed to cause firms to increase their design fuel economy at equilibrium. However, the maximum attainable improvement can be modest even if the penalty is doubled. We also find that firms’ design responses are more sensitive to variation in fuel prices than to CAFE standards, within the examined ranges.     

由多孔介质注射的微气泡和气层对减小自航驳船模型拖曳力效果的比较研究（英文）

Ship resistance issues are related to fuel economy, speed, and cost efficiency. Air lubrication is a promising technique for lowering hull frictional resistance as it is supposed to modify the energy in the turbulent boundary layer and thereby reduce hull friction. In this paper, the objective is to identify the optimum type of air lubrication using microbubble drag reduction(MBDR)and air layer drag reduction(ALDR) techniques to reduce the resistance of a 56-m Indonesian self-propelled barge(SPB). A model with the following dimensions was constructed: length L = 2000 mm, breadth B = 521.60 mm, and draft T = 52.50 mm.The ship model was towed using standard towing tank experimental parameters. The speed was varied over the Froude number range 0.11–0.31. The air layer flow rate was varied at 80, 85, and 90 standard liters per minute(SLPM) and the microbubble injection coefficient over the range 0.20–0.60. The results show that the ship model using the air layer had the highest drag reduction up to a maximum of 90%. Based on the characteristics of the SPB, which operates at low speed, the optimum air lubrication type to reduce resistance in this instance is ALDR.     

From suspended particles to strata: The fate of terrestrial substances in the Gaoping (Kaoping) submarine canyon

The river–sea system consisting of the Gaoping (new spelling according to the latest government's directive, formerly spelled Kaoping) River (KPR), shelf, and Submarine Canyon (KPRSC) located off southern Taiwan is an ideal natural laboratory to study the source, pathway, transport, and fate of terrestrial substances. In 2004 during the flood season of the KPR, a system-wide comprehensive field experiment was conducted to investigate particle dynamics from a source-to-sink perspective in the KPRSC with the emphasis on the effect of particle size on the transport, settling, and sedimentation along the pathway. This paper reports the findings from (1) two sediment trap moorings each configured with a Technicap PPS 3/3 sediment trap, and an acoustic current meter (Aquadopp); (2) concurrent hydrographic profiling and water sampling was conducted over 8 h next to the sediment trap moorings; and (3) box-coring in the head region of the submarine canyon near the mooring sites. Particle samples from sediment traps were analyzed for mass fluxes, grain-size composition, total organic carbon (TOC) and nitrogen (TN), organic matter (OM), carbonate, biogenic opal, polycyclic aromatic hydrocarbon (PAH), lithogenic silica and aluminum, and foraminiferal abundance. Samples from box cores were analyzed for grain-size distribution, TOC, particulate organic matter (POM), carbonate, biogenic opal, water content, and ²¹⁰Pb_ex. Water samples were filtered through 500, 250, 63, 10 µm sieves and 0.4 µm filter for the suspended sediment concentration of different size-classes.Results show that the river and shelf do not supply all the suspended particles near the canyon floor. The estimated mass flux near the canyon floor exceeds 800 g/m²/day, whose values are 2–7 times higher than those at the upper rim of the canyon. Most of the suspended particles in the canyon are fine-grained (finer than medium silt) lithogenic sediments whose percentages are 90.2% at the upper rim and 93.6% in the deeper part of the canyon.As suspended particles settle through the canyon, their size-composition shows a downward fining trend. The average percentage of clay-to-fine-silt particles (0.4–10 µm) in the water samples increases from 22.7% above the upper rim of the canyon to 56.0% near the bottom of the canyon. Conversely, the average percentage of the sand-sized (> 63 µm) suspended particles decreases downward from 32.0% above the canyon to 12.0% in the deeper part of the canyon. Correspondingly, the substrate of the canyon is composed largely of hemipelagic lithogenic mud. Parallel to this downward fining trend is the downward decrease of concentrations of suspended nonlithogenic substances such as TOC and PAH, despite of their affinity to fine-grained particles.On the surface of the canyon, down-core variables (grain size, ²¹⁰Pb_ex activity, TOC, water content) near the head region of the canyon show post-depositional disturbances such as hyperpycnite and turbiditic deposits. These deposits point to the occurrences of erosion and deposition related to high-density flows such as turbidity currents, which might be an important process in submarine canyon sedimentation.     

Starting sliding mode variable structure that coordinates the control and real-time optimization of dry dual clutch transmissions

This paper researches the coordination of control between an engine and clutch at the system level to adequately reflect a driver’s intention and improve the starting performance of a vehicle equipped with a dry dual clutch transmission (DCT). Four-degree-of-freedom (DOF) starting dynamic equations are established for a dry DCT with a single intermediate shaft, and a two-DOF model of the sliding friction process and a single-DOF in-gear model of stable operation are obtained after simplifying these equations. Taking advantage of predictive control and a genetic algorithm, target tracing curves of the engine’s speed and the vehicle’s velocity are optimally specified online, and the starting sliding mode variable structure (SMVS) coordinating control strategy is designed to track these curves. The starting performance of a prototype car equipped with a dry DCT is simulated under different starting cases on the MATLAB/Simulink software platform. The simulation results show that the designed SMVS coordinating controller not only embodies driver intention and effectively improves the dry DCT car’s starting performance but is also highly robust when subjected to variations in the vehicle parameters.