Should we abandon activity type analysis? Redefining activities by their salient attributes

This paper poses a challenge and begins a search. The challenge is to reconsider the usefulness of traditional activity types (“work”, “shopping”, etc.) in the understanding and modelling of travel behaviour. The search is for the more salient attributes of activities that may serve to better explain complex travel behaviours—such as activity scheduling and tour formation. In particular, this paper focuses on explicit measures of the spatial, temporal and interpersonal flexibility of activities, along with several traditional attributes (frequency, duration, involved persons, travel time, and location). Data from a recent in-depth week-long activity scheduling survey was used to define and compare these attributes. Results show that considerable variability in the attributes between and within traditional activity groups is evident. This casts considerable uncertainty on assumptions that statically assign levels of spatial, temporal, and interpersonal flexibility to any given activity type. A Principal Components Analysis further revealed eight new distinct clusters of activities that share like attributes. The relative role of each attribute in each component is examined, and subjective interpretations emerged (e.g., “Long and frequent”, “Space and time flexible” “Social networking”). The implications of these results for future model development and research are discussed. Future research should continue to expand the search for salient attributes and link them more directly to decision processes.     

Dual extended Kalman filter for vehicle state and parameter estimation

The article demonstrates the implementation of a model-based vehicle estimator, which can be used for combined estimation of vehicle states and parameters. The estimator is realised using the dual extended Kalman filter (DEKF) technique, which makes use of two Kalman filters running in parallel, thus 'splitting' the state and parameter estimation problems. Note that the two problems cannot be entirely separated due to their inherent interdependencies. This technique provides several advantages, such as the possibility to switch off the parameter estimator, once a sufficiently good set of estimates has been obtained. The estimator is based on a four-wheel vehicle model with four degrees of freedom, which accommodates the dominant modes only, and is designed to make use of several interchangeable tyre models. The paper demonstrates the appropriateness of the DEKF. Results to date indicate that this is an effective approach, which is considered to be of potential benefit to the automotive industry.     

Optimum design of tilting bogie frame in consideration of fatigue strength and weight

This paper addresses the use of finite-element (FE) analysis to calculate the fatigue strength of a bogie frame, for the development of tilting trains in Korea. A multi-body dynamic analysis was performed to extract the load condition by tilting on curves. Using the results of the multi-body dynamic analysis and the load scenario setout in the UIC standard, FE analysis was performed to obtain the stress distribution and to calculate the fatigue strength. An attempt was made to minimize the weight of the bogie frame using a back-propagation artificial neural network (ANN). The results of this study reveal that the stresses at some nodes are near the fatigue limit in the Goodman diagram and by using back-propagation ANN, the weight of the bogie frame could be reduced by 4.7%.     

Digital exchange of design models between marine equipment libraries using hybrid neutral formats

The selection of marine equipment is a time-consuming process for a ship outfitting designer. The inefficiency originates from the paper-based exchange of design information between shipyards and equipment manufacturers. We propose a method to exchange equipment models for electronic commerce. Shipyard practices were investigated to find out how the outfitting CAD library is being used. We also surveyed international standards for the exchange of digital equipment models, and analyzed the macroparametric methodology. We propose a hybrid method to represent the geometric information using STEP AP203 or the macroparametric method. The nongeometric information is defined according to the Parts Library (PLIB) standard. We implement a pilot system and test it with a ship design data set. The equipment model proposed can be used in the design process with heterogeneous shipbuilding CAD systems. The equipment model can improve the design and purchase process in shipyards.     

PIV velocity field measurements of flow around a KRISO 3600TEU container ship model

The main purpose of this investigation was to demonstrate a useful application of the particle image velocimetry (PIV) method to analyze the complex flow characteristics around a ship. For a sample illustration, the KRISO 3600TEU container ship model was chosen. The flow structure in the stern and near-wake region of the model has been investigated experimentally in a circulating water channel. Instantaneous velocity fields measured by the PIV velocity field measurement technique have been ensemble-averaged to give details of flow structures such as the spatial distributions of the local mean velocity, vorticity, and turbulent kinetic energy. The free-stream velocity was fixed at U _o = 0.6m/s, and the corresponding Reynolds number based on the length between perpendiculars was about 9.0 × 10⁵. The container ship model shows a complicated three-dimensional flow structure in the stern and near-wake regions. The PIV results clearly revealed the formation of large-scale bilge vortices in the stern region and their effect on the flow in the near-wake. The results shown here provide valuable information for hull form design and the validation of viscous ship flow codes and of turbulence models.     

Conformity: How VMT-speed distributions can affect mobile emission inventories

Transportation conformity is a US regulatory process that requires that transportation modeling be integrated with air quality modeling. Consequently, every change to either modeling process is undertaken with great scrutiny by the regional governments, who have to use the models for demonstrating conformity. This paper explores the "trip versus link debate," which stems from the fact that the standard travel demand models used by most metropolitan planning organizations are primarily link oriented, while the air quality models have been primarily trip oriented. Using the Sacramento region we examine the effects on mobile source emissions inventories when speed-VMT distributions are constructed using the trip and link-based philosophies. The results of our study indicate that trip-based VMT-speed distributions produce consistently lower emissions estimates than the link-based distributions. We use the results to assert that deciding between a trip-based or link-based conformity modeling process involves more than the technical difficulty of changesto the models or the potential political ramifications, it involves assessing which method will provide the most accurate estimates of regional motor vehicle emissions. We also examine ways to think about constructing mobile source emission inventories.     

Roll Dynamics of Commercial Vehicles

An analytical model is developed here for studying the roll dynamics of commercial vehicles. Large displacements and rotations are accounted for in this nonlinear model so that it can be used for the study of roll dynamics well beyond the limits of wheel lift-off. The model is used to illustrate some of the dynamic phenomena in vehicle rollover, especially the interactive coupling between the roll and the vertical modes of motion. The influence of suspension backlash on rollover resistance is demonstrated, and the phenomenon of roll motion resonance is illustrated to suggest new means for evaluating vehicle rollover sensitivity.     

Economic Valuation of Coastal and Marine Resources: Bohol Marine Triangle,Philippines

This article provides results on the net benefits generated from the natural resources in the Bohol Marine Triangle (BMT) in the Philippines. The BMT spans over 112,000 ha and its coastal ecosystems are rich in biodiversity and provide economic opportunities to the coastal communities. With a 10% discount rate, the accumulated total net benefits for the BMT resources over a 10-year period is US$11.54 million. Tourism and the municipal fisheries are the most important direct use values of the coastal and marine resources of the BMT accounting for 44% and 39% of the total net benefits. Annual revenues attributed to ecosystems were as follows: coral reefs, US$1.26 million; beach/intertidal area, US$1.12 million; marine waters, US$646,501; mangrove, US$239,561; and seagrass, US$105,990. The large market values indicate the dependence of the local community on the BMT coastal and marine resources. In the same way, non-market values show the important life-support functions of coastal and marine ecosystems. The net benefits reflect the magnitude of potential losses due to improper management of coastal and marine resources in the BMT. This valuation highlights the importance of the coastal services to the BMT economy and draws attention to the benefits the local stakeholders derive from BMT coastal resources. Policy measures can now take into account these values to justify a sufficient investment in coastal management efforts to sustain the flow of coastal services in the interest of current and future generations.     

Model-based analysis of the mechanical subsystem of an air brake system

Most commercial vehicles such as buses and trucks use an air brake system, often equipped with an S-cam drum brake, to reduce their speed and/or to stop. With a drum brake system, the clearance between the brake shoe/pad and the brake drum may increase because of various reasons such as wearing of the brake shoe and/or brake drum and drum expansion caused by high heat generation during the braking process. Hence, to ensure proper functioning of the brake system, it is essential that the clearance between the brake shoe and the brake drum is monitored. In this paper, we present a mathematical model for the mechanical subsystem of the air brake system that can be used to monitor this clearance. This mathematical model correlates the push rod stroke transients and the brake chamber pressure transients. A kinematic analysis and a dynamic analysis of the mechanical subsystem of the air brake system were performed, and the results are corroborated with experimental data.