Simulation of flow in diesel particulate filter system using metal fiber filter media

Metal fiber is introduced as a new filter media in wall-flow Diesel Particulate Filter (DPF) system. This technology has high temperature durability which is required for filter regeneration, and can maintain the mechanical strength even in the extreme exhaust-related vibrations of vehicles. However, the regeneration near the wall (outer layer) is more difficult because of the heat loss and reduced gas flow near the wall. In this study, a flow is simulated to determine the flow control method for the more uniform flow in all filter layer. By using Star CCM+ commercial software, we obtain local velocity, streamline, and pressure distributions in the filter, which are typically difficult to obtain from measurements. The major control factors are the filter porosity, size and location of the distribution plate, and the number of blades of the swirler. By placing the distribution plate in front of the filter, the flow velocity near the wall was increased. The optimum location and size of the flat plate were chosen. By attaching the blade on the plate the flow velocity near the wall was increased more. Therefore, the regeneration efficiency is increased by using the swirler-type metal fiber DPF system.     

Simulation of mixed gas formation for a spray-wall complex guided LPG direct injection engine

To obtain an ultralean air-fuel ratio and to reduce engine-out NOX and HC emissions induced by the richer mixture near the spark plug, a spray and wall complex guided combustion system has been developed by utilizing the fuel characteristics of LPG. The new combustion system configuration is optimized by using a commercial CFD code, FIRE V2013, and the reliability of the system has been experimentally demonstrated by Plane Laser-Induced Fluorescence (PLIF). The mixture formation in the new combustion system under part load (2,000 rpm) is numerically simulated. With an injection timing of 40°CA BTDC, the LPG spray which is injected from two upper holes, reaches the ignition point, and the other part of the LPG spray which is injected from the bottom hole, is directed to the ignition point through the vertical vortices at the same time. At the ignition timing of about 20°CA BTDC, the two-part mixtures have been shown to form a stable and richer stratified mixture around the ignition point, and the maximum global air-fuel ratio reaches to 60: 1.     

Robust control for four-wheel-independent-steering electric vehicle with steer-by-wire system

A four-wheel-independent-steering (4WIS) electric vehicle (EV) with steer-by-wire (SBW) system is proposed in this paper. The fast terminal sliding mode controller (FTSMC) is designed for the SBW system to suppress external disturbances. Taking unstructured and structured uncertainties into consideration, a robust controller is designed for the 4WIS EV utilizing μ synthesis approach and the controller order reduction is implemented based on Hankel-Norm approximation. Since sideslip angle is the feedback signal of robust controller and it is hard to measure, the extended Kalman filter (EKF) is employed to estimate sideslip angle. To evaluate the vehicle performance with the designed control system, step and sinusoidal steering maneuvers are simulated and analyzed. Simulation results show that the designed control system have good tracking ability, strong robust stability and good robust performance to improve vehicle stability and handing performance.     

Effective method for knock signal denoising in internal combustion engine

Uncontrolled expansion of combustion wave in spark ignited internal combustion engine causes knock effect which seriously degrades efficiency and lifetime of the engine. Thus, accurate knock detection and control are essential for obtaining a desired performance from the engine. Usually, knock sensor is used to detect this phenomenon but it has limited accuracy especially at engine high-speed rotations because of natural vibration and external noises. In this study an effective method based on Non-Local Mean (NLM) algorithm has been proposed to improve the knock detection accuracy. This method is evaluated based on four different indicators and four engine cylinders. The results show 52.9 % improvement in knock detection. Also feasibility of real time execution of this method based on embedded hardware has been studied.     

Prediction of fatigue life and estimation of its reliability on the parts of an air suspension system

Air suspension systems have been implemented in various commercial vehicles, such as buses and special purpose trucks, because of the comfortable ride and easy height control. An evaluation of the durability of vehicle parts has been required for service life and safety starting in the early stages of design. The cyclic load applied to the vehicle can cause fatigue failure of parts, such as the suspension frame. This paper presents a method to predict the fatigue life of the suspension frame at the design stage of the air suspension system used in a heavy-duty vehicle. To estimate the fatigue life using the SN method, the Dynamic Stress Time History (DSTH) is necessary for the part of interest. DSTH can be obtained from the results of the flexible body dynamic analysis using the Belgian road simulation and the Modal Stress Recovery (MSR) method. Furthermore, the reliability of the predicted fatigue life can be evaluated by considering the variations in material properties. The probability and distribution of the expected life cycle can be obtained using experimental design with a minimum number of simulations. The advantage of using statistical methods to evaluate the life cycle is the ability to predict replacement time and the probability of failure of mass-produced parts. This paper proposes a rapid and simple method that can be effectively applied to the design of vehicle parts.     

Modeling the structural relationships among short-distance travel amounts,perceptions, affections,and desires

Using structural equation modeling, the relationships among travel amounts, perceptions, affections, and desires across five short-distance (one-way trips of less than 100 miles) travel categories (overall, commute, work/school-related, entertainment/social/recreation, and personal vehicle) are examined. The models are estimated using data collected in 1998 from more than 1300 working commuters in the San Francisco Bay Area. A cross-model analysis reveals three robust relationships, namely: (1) myriad measures of travel amounts work together to affect perceptions; (2) perceptions are consistently important in shaping desires; and (3) affections have a positive relationship with desires. The second finding suggests that two individuals who travel the same objective amount may not have the same desire to reduce their travel: how much individuals perceive their travel to be is important. The third point argues that the degree to which travel is enjoyed is a key determinant of shaping desires to reduce travel: the more travel is enjoyed, the less the desire to reduce it.     

Modeling activity conflict resolution strategies using scheduling process data

Developments in activity scheduling process data have recently allowed for much improvement and validation of rule-based activity scheduling models. The use of actual scheduling process data allows for a potentially more realistic model in terms of how the travel episodes are actually derived. Since these types of models are simulations of the scheduling process, scheduling conflicts naturally arise in the creation of the final schedule. The handling of these scheduling conflicts is a critical component of all rule-based activity models. Many of these models rely on the concept of priority of the activities to resolve conflicts. However, recent research has shown that this is often not how conflicts are actually resolved. In order to more accurately model actual conflict resolution behavior, scheduling process data was used to estimate conflict resolution rules using decision trees. The use of a conflict resolution model allows the strategy chosen to depend on the attributes of the individual and the conflicting activities, rather than assuming a prior definition of precedence based on the activity types. The conflict resolution decision showed reasonable ability to predict the resolution strategy chosen in actual scheduling process survey data, and represents an important advance in developing a functional computational process model of activity scheduling.     

Estimating the robustness of questionnaire results: lessons from a mixed-mode survey of expectations for tele-working and road-based business travel

The robustness of questionnaire results to various forms of bias are explored in the context of a dual-mode (web and hardcopy) survey of employers’ anticipations of levels of employee commuting and business travel activity under a range of future ICT scenarios. The questionnaire incorporated several innovative features which, together with the dual-mode format, allowed an unusually wide range of analyses. For example: the robustness of respondents’ opinions was tested by examining the effect of incorporating alternative versions of a briefing text, one being very positive and one very negative, about the role of ICT; instrument bias was identified via detailed comparison of the results from the two versions of the questionnaire; and the impact of exogenous factors which are often ignored or taken as constant was assessed via special supplementary questions. Analysis showed that the robustness of opinions and expectations varied and was influenced by respondent characteristics, and that results from the two versions of the questionnaire differed significantly. It is concluded that opinions and expectations are less robust, and questionnaire results are more subject to bias and myopic interpretation, than is generally recognised and that web-based surveys seem particularly vulnerable to sampling bias. Methods are suggested for measuring robustness, for reducing bias and for validating and contextualising results. The use of contrasting briefing texts is recommended as a means of establishing the robustness of opinions and expectations while supplementary questions are recommended for validating and contextualising SP and SE exercises.