Experimental study on a model azimuthing podded propulsor in ice

The objective of this study was to investigate the performance of a model azimuthing podded propulsor in ice-covered water. Model tests were carried out with two different depths of cut into the ice (15 and 35 mm), two different ice conditions (presawn and pack ice conditions), and four different azimuthing angles. The depth of cut is the maximum penetration depth of the propeller blade into the ice block. The 0.3-m-diameter model propeller was operated in a continuous ice milling condition. Ice loads were measured by several sensors which were installed in various positions on the model. Six one-axis pancake-style load cells on the top of the model measured the global loads and two six-component dynamometers were installed on the shaft to measure the shaft loads. One six-component dynamometer was attached to the one of the propeller blades inside the hub to measure the blade loads. The pod unit and propeller performance in ice are presented. Ice-related loads, which were obtained when the blade was inside the ice block, are introduced and discussed. During the propeller–ice interaction, a blade can experience the path generated by the previous blade, which is called the shadowing effect. The effects of shadowing, depth of cut, azimuthing angle, and advance coefficient on propulsor performance are presented and discussed.     

Improving pollutant emissions in diesel engines for heavy-duty transportation using retarded intake valve closing strategies

A combined theoretical and experimental study has been carried out to determine the real potential of reducing pollutant emissions in a HD diesel engine by means of retarding the intake valve closing. The effects produced by this alteration of the basic operation cycle have been examined by a preliminary modelling study, and from the obtained results, a modified camshaft was manufactured with a delayed intake valve closing of 60 crank angle degrees. Single-cylinder engine tests were carried out with this modified camshaft, and the emissions and fuel consumption were recorded. The results showed that the retarded intake valve closing can enhance the premixed combustion phase, and thus simultaneously reduce soot and NOx emissions. Moreover, the combustion process attained is extremely tolerant to exhaust gas recirculation, and by adoption of this measure, Euro-5 emissions limits can be achieved at the tested conditions without after-treatment.     

Trip distribution for limited destinations: a case study for grocery shopping trips in the Netherlands

In this paper, we introduce a new trip distribution model for destinations that are not homogeneously distributed. The model is a gravity model in which the spatial configuration of destinations is incorporated in the modeling process. The performance was tested on a survey with reported grocery shopping trips in the Dutch city of Almelo. The results show that the new model outperforms the traditional gravity model. It is also superior to the intervening opportunities model, because the distribution can be described as a function of travel costs, without increasing the computational time. In this study, the distribution was described by a simple function of Euclidean distance, which provides a good fit to the survey data. The slope of the distribution is quite steep. This shows that most trips are made to nearby supermarkets. However, a significant fraction of trips, mainly made by car, still goes to supermarkets further away. We argue that modeling of these trips by the new method will improve traffic flow predictions.     

Trip generation of vulnerable populations in three Canadian cities: a spatial ordered probit approach

This paper provides an analysis of trip generation of three vulnerable groups: single-parent families, low income households, and the elderly. It compares the mobility of these groups to that of the general population in three Canadian urban areas of Hamilton, Montreal and Toronto, based on data from large-sample metropolitan transport surveys. An ordered probit model with spatially expanded coefficients is used for the analysis. Spatial expansion shows that there are spatial mobility trends for elderly populations and low-income populations even after socio-economic attributes are accounted for. Such spatial differences are not generally found for single parent families. This novel spatial analysis provides clues as to where vulnerable populations may experience greater degrees of social exclusion. It provides information to help prioritize transportation infrastructure projects or other social programs to take into account the needs of vulnerable populations with the lowest levels of mobility.     

Biologically induced differences in erodibility and aggregation of subtidal and intertidal sediments: a possible cause for seasonal changes in sediment deposition

This study was carried out to describe the difference in erodibility and aggregation in a tidal basin including both subtidal and intertidal study sites and to use these results to explain the shifting erosion/deposition cycles at the sites. Erosion thresholds, erosion rates and settling velocities of the eroded material were measured at a mudflat transect and at sediment cores taken from a nearby tidal channel during surveys made in May 2000 and March 2002. Surface samples were analysed for grain-size, chl. a content, faecal pellet content, dry bulk density and organic content. Additionally, surface samples were taken at eight occasions in the period January 2002 to May 2003 from shallow tidal channels in the area. These samples were analysed for mud content and showed that major shifts in sediment distribution occurred in the period. The erodibility of the mudflat was generally high due to pelletization by the mudsnail Hydrobia ulvae but close to the salt marsh much lower erodibility was found, probably due to stabilisation by microphytobenthos. In contrast, the erodibility of the channel bed seemed to be very little influenced by biological activity and the relatively low erodibility found here was caused by physical characteristics of the sediment. The sediment eroded from the mudflat was generally strongly pelletized and showed high settling velocities whereas less aggregation and lower settling velocities were found for the channel bed sediments. Temporal variations of the mudflat stability and hydrodynamics resulted in temporal variations of deposition and erosion and the changing stability at the mudflat is likely to be one of the main reasons for a general transport of fine-grained sediment from the mudflat to the channel in the cold seasons and vice versa during the rest of the year.     

Conditional modelling of tanker market risk using route specific freight rates

This paper provides statistical evidence in support of the view, widely held in the tanker industry, that there are systematic differences in the degree of risk involved in investing in tankers of different sizes, and in operating tankers in spot and time charter markets. The industry view, broadly supported by the results of this paper, is that larger vessels are 'risker' assets than smaller vessels, and operating vessels in the time-charter market is less risky than employing them on a spot basis. The results are obtained by using a method derived from the financial economics literature, which models both the conditional mean and variance of a variable, known as GARCH modelling. Only one other paper has applied this method to the tanker market, and these results provide confirmatory support of those findings.     

Study of in-vehicle route guidance systems for improvement of right-side drivers in the Japanese traffic system

A country can adopt one of two standards for traffic flow — cars may travel on the left or right side of the road. When drivers who are accustomed to driving on the right side of the road drive on the left side, and vice versa, the mental workload is likely increased due to the driver’s unfamiliarity with a new language, the position of the driver’s seat, different driving directions, and other factors that differ from those of their home country. One method of doing this is to make sure that the in-vehicle route guidance information (RGI) is not overly complicated — thereby assisting drivers in improving their safety. Consequently, the aim of this study was to facilitate mobility and improve safety for natural right-side drivers driving temporarily in left-side traffic. In this study, driver behavior and workload — given various types of RGI — were evaluated in a driving simulator with a variety of prescribable test conditions. This research was composed of two experiments. In the first, various types of in-vehicle route guidance systems were tested and evaluated in terms of their characteristics and associated driver behaviors (while driving). In the second experiment, systemic factors and effectiveness were evaluated by two combined systems, arrow and map-type information, based on the results of the first experiment. In light of both experiments, the various types of route guidance systems were discussed in terms of their results. A navigation system was proposed to alleviate some of the secondary tasks such as route selection.     

Torque characteristics analysis for optimal design of a copper-layered eddy current brake system

An enhanced parametric model for a copper-layered eddy current electric machine (retarder) is introduced in this paper. The modeled torque characteristics of the copper-layered electromagnetic retarders are based on the results from a detailed electromagnetic finite element analysis (FEA) of these eddy current machines. The model uses a parameterized double-exponential function to model the steady state speed-torque characteristics of the retarder. The parameters are adjusted for optimal braking performance in conjunction with predicted speed-torque characteristics of a copper-layered retarder. A full vehicle model, along with the proposed retarder speed-torque model has been used to simulate a series braking events. The simulation results show that the peaks of the retarder speed-torque curves must be designed to occur within a specific range of speeds for optimal braking performance.     

Topological analysis of powertrains for refuse-collecting vehicles based on real routes–Part I: Hybrid hydraulic powertrain

In this two-part paper, a topological analysis of powertrains for refuse-collecting vehicles (RCVs) based on the simulation of different architectures (internal combustion engine, hybrid electric, and hybrid hydraulic) on real routes is proposed. In this first part, a characterization of a standard route is performed, analyzing the average power consumption and the most frequent working points of an internal combustion engine (ICE) in real routes. This information is used to define alternative powertrain architectures. A hybrid hydraulic powertrain architecture is proposed and modelled. The proposed powertrain model is executed using two different control algorithms, with and without predictive strategies, with data obtained from real routes. A calculation engine (an algorithm which runs the vehicle models on real routes), is presented and used for simulations. This calculation engine has been specifically designed to analyze if the different alternative powertrain delivers the same performance of the original ICE. Finally, the overall performance of the different architectures and control strategies are summarized into a fuel and energy consumption table, which will be used in the second part of this paper to compare with the different architectures based on hybrid electric powertrain. The overall performance of the different architectures indicates that the use of a hybrid hydraulic powertrain with simple control laws can reduce the fuel consumption up to a 14 %.     

Optimal scheduling of the flexray static segment based on two-dimensional bin-packing algorithm

FlexRay is a reliable and hard real-time in-vehicle communication protocol that is strongly promoted by car manufacturers as the de facto standard in the automotive domain. The protocol offers both a time-triggered and an eventtriggered architecture. This paper focuses on the optimal scheduling of the time-triggered component of FlexRay known as the static (ST) segment using a two-dimensional bin-packing technique. To maximize the bandwidth utilization in the ST segment, a fast heuristic as well as an efficient integer linear programming approach are proposed. Our methods directly schedule signals into slots including frame packing, according to signal-based data scheduling and the slot/ cycle multiplexing mechanisms presented by the latest version of the FlexRay protocol. The benefits of our proposed methods are demonstrated by extensive experiments on synthetic and an automotive X-by-wire system case study. An additional test case is examined to emphasize the superior performance of the proposed approach relative to that of existing optimal scheduling approaches.