Improving the predictiveness of the quasi-d combustion model for spark ignition engines with flexible intake systems

Fast and predictive simulation tools are prerequisites for pursuing simulation based engine control development. A particularly attractive tradeoff between speed and fidelity is achieved with a co-simulation approach that marries a commercial gas dynamic code WAVE™ with an in-house quasi-dimensional combustion model. Gas dynamics are critical for predicting the effect of wave action in intake and exhaust systems, while the quasi-D turbulent flame entrainment model provides sensitivity to variations of composition and turbulence in the cylinder. This paper proposes a calibration procedure for such a tool that maximizes its range of validity and therefore achieves a fully predictive combustion model for the analysis of a high degree of freedom (HDOF) engines. Inclusion of a charge motion control device in the intake runner presented a particular challenge, since anything altering the flow upstream of the intake valve remains “invisible” to the zero-D turbulence model applied to the cylinder control volume. The solution is based on the use of turbulence multiplier and scheduling of its value. Consequently, proposed calibration procedure considers two scalar variables (dissipation constant C _β and turbulence multiplier C _M ), and the refinements of flame front area maps to capture details of the spark-plug design, i.e. the actual distance between the spark and the surface of the cylinder head. The procedure is demonstrated using an SI engine system with dual-independent cam phasing and charge motion control valves (CMCV) in the intake runner. A limited number of iterations led to convergence, thanks to a small number of adjustable constants. After calibrating constants at the reference operating point, the predictions are validated for a range of engine speeds, loads and residual fractions.     

Experimental investigation using CFD for thermal performance of ventilated disc brake rotor

In the present work, different ventilated disc brake rotor configurations were analysed to enhance the heat transfer rate and obtain the uniform temperature distribution in the rotor. CFD code used in this work was validated at using experimental results obtained by conducting experiments on a test rig. The experimental analysis was performed to calculate the mass flow rate and heat dissipation through the rotor. Further, different types of rotor configurations viz. straight radial vane (SRV), tapered radial vane (TRV), alternate long and short vane (ALSV), variable diameter circular pillars (VDCP) were considered for the analysis. A rotor segment of 20° was considered for the numerical analysis due to its rotational symmetry. CFD results were in good agreement with the experiments. The maximum deviation of the numerical results were about 12 % from the experimental results. It is found from the analysis that among the different types of rotor configurations; variable diameter circular pillars (VDCP) rotor gives better rate of heat dissipation with more uniform temperature distribution in the flow passages. Hence for modern high speed vehicles VDCP rotor may be more appropriate.     

Perturbation/correlation based optimal internal combustion engine tuning

This paper addresses the application of the perturbation/correlation method to optimizing the torque output of internal combustion engines. This application was inspired by observations of the limitations in current techniques of the automotive performance tuning industry. Performance issues such as errors from true optimum spark timing and fuel injector pulse width values as well as convergence were considered for optimal tuning. The ability of the system to deal with engine cycle-to-cycle variations and their effect on input parameters is also analyzed.     

严峻问题

今年关于太平洋航线有两个不确定因素,即美国进口量增长将会大大放缓,同时美国出口量会继续增加.因此,几乎所有其他的问题都是不确定的:进口量是否会增长还是会减少?     

Parameter transfer of common-metric attributes in choice analysis: implications for willingness to pay

There is a growing literature that promotes the presence of a mix of compensatory and semi-compensatory processing strategies in the way that individuals evaluate packages of attributes in real or hypothetical markets, and make choices. This paper proposes a specification for the utility form in a choice model to test if, given a pair of attributes with a common-metric (e.g., components of travel time or cost), the attribute with the dominating level defines the marginal (dis)utility that is assigned to both attributes. We refer to this processing strategy as a parameter transfer rule. We use a stated choice data set, in the context of car driving individuals choosing between tolled and non-tolled routes, to estimate a mixed logit model which incorporates the presence of the parameter transfer rule and the conventional fully compensatory rule, both existing up to a probability. We find that if this parameter transfer heuristic is part of the mix, the WTP is more than 30% higher, on average, than when only a fully compensatory rule is imposed. We also contrast the parameter transfer rule with other semi-compensatory heuristics which have been investigated in other papers, and show that the finding adds further support to the accumulating evidence that a semi-compensatory attribute processing rules tend to result in higher mean WTP estimates compared to the fully compensatory attribute processing rule.     

Off-set crack propagation analysis under mixed mode loadings

An assessment was carried out herein to study the eccentricity of cracks subjected to mixed-mode loadings. Several loading locations relative to a central line were selected to induce mixed-mode loadings, which were computed using a finite element method. An adaptive meshing technique was adopted during the simulation of crack propagation to ensure the singularity of stress at the tip of the crack. The stress intensity failure criterion was used and programmed, and the node splitting technique was used when the stress intensity factor reached the fracture toughness of the material to simulate crack propagations. It was found that large variations in the stress intensity factor were observed when off-set cracks were used, and that K _II decreased when loading distance increased, but increased when the off-set crack distance was increased. Both crack eccentricity and loading distance played important roles in producing mixed-mode loading, compared to the influence of central cracks. Correction factors were introduced to modify the calculation of stress intensity factors under mixed-mode loadings. Simulations of crack propagation were also conducted to study the effects of crack eccentricities and loading distances. It was found that the crack length, the loading distance relative to the central crack and the crack eccentricity dominated calculations of the integrity of cracked structures.     

Development of a semi-empirical friction model in automotive driveshaft joints

High speed and sport utility vehicles with large joint articulation angle demand lower friction in automotive driveshaft joints to meet noise and vibration comfort levels. Thus a more thorough understanding of internal friction characteristics and mechanisms is required. In this paper, a friction model in automotive driveshaft joints was developed through the use of test data from an instrumented Constant Velocity (CV) joint friction apparatus with actual driveshaft assemblies. Experiments were conducted under different realistic operating conditions of oscillatory speeds, CV joint articulation angles, lubrication, and torque. The experimental data was used to develop a physics-based semi-empirical CV joint internal friction model as a function of different CV joint operating parameters. It was found that the proposed friction model captures the experimental results well. Also the friction model estimates the generated axial force (GAF) in tripod CV joints well, which is the main source of force that causes vehicle vibration problems.     

严峻问题——经济、燃油或本、运力、码头运输工人联盟谈判产生了不确定性

今年关于太平洋航线有两个不确定因素，即美国进口量增长将会大大放缓，同时美国出口量会继续增加。因此，几乎所有其他的问题都是不确定的：进口量是否会增长还是会减少？航运公司是否会随着船只规模的增加，而为贸易业务分配更多运力，或者仅仅保持现有运力？他们是否能够成功增加运费以弥补成本的增长？发货人是否同意支付完全不固定的船舶燃油附加费？     

天然海水中15CDV6/MDN138及15CDV6/MDN250合金的电流相互作用（英文）

The galvanic corrosion behavior of the metal combinations 15 CDV6/MDN138 and 15 CDV6/MDN250, with 1:1 area ratio, has been studied in natural seawater using the open well facility of CECRI's Offshore Platform at Tuticorin for a year. The open circuit potentials of MDN138, MDN250, and 15 CDV6 of the individual metal, the galvanic potential and galvanic current of the couples 15 CDV6/MDN138 and 15 CDV6/MDN250, were periodically monitored throughout the study period. The calcareous deposits on MDN138 and MDN250 in galvanic contact with 15 CDV6 were analyzed using XRD. The electrochemical behavior of MDN138, MDN250, and 15 CDV6 in seawater was studied using an electrochemical work station. The surface characteristics of MDN138 and MDN250 in galvanic contact with 15 CDV6 have been examined with a scanning electron microscope. The results of the study reveal that the galvanic protection offered by15 CDV6 to MDN250 and MDN138 in natural seawater amounts to 93% and 98%, respectively, implying that the galvanic protection offered by 15 CDV6 is continuous and effective, which has been further evinced from the adherent nature of the calcareous deposit film comprising compounds such as CaCO_3(calcite, aragonite, and vaterite), MgCO_3(magnesite),Mg(OH)_2(brucite), and MgO(brucite).