Effects of a classroom-based bridge resource management training on knowledge,attitudes, behaviour and performance of junior naval officers

This study asses the effectiveness of classroom-based bridge resource management (BRM) training for junior naval officers, in which general principles of human behaviour and performance in teams and under stress were conveyed. Although BRM training is recommended by the International Maritime Organization and is increasingly common in seafaring, very little is known about whether the adaptation of crew resource management (CRM) training from aviation to the maritime domain has been successful and what type of training is effective. A study with a quasi-experimental, two-factorial mixed design was conducted with BRM training as the between factor and time as the within factor. For 117 study participants, evaluation criteria were assessed on all levels as defined by Kirkpatrick (Train Dev J, 178–192 1979): subjective training evaluation, knowledge, attitudes and behaviour as well as performance while commanding a vessel during a real-world exercise. BRM participants showed better subjective training evaluations and more BRM-related knowledge than controls. Training did not produce differences between groups regarding BRM-related attitudes, the demonstration of non-technical skills or the overall success in the real-world exercise. Overall, BRM training effectiveness was rather low, which can most probably be attributed to the focus of training on generalizable knowledge, skills and attitudes at the expense of their specific application to the context of the real-world exercise. In the design of BRM and CRM training courses alike, the effective application of general principles to a given context must be defined, and the application must be emphasised during training delivery.     

Geochemical controls on distributions and speciation of As and Hg in sediments along the Gaoping (Kaoping) Estuary–Canyon system off southwestern Taiwan

Surface and box-cored sediments were collected along the Gaoping (formerly spelled Kaoping) Estuary–Canyon system and analyzed for As and Hg contents and speciation, ²¹⁰Pb-based sedimentation rates and various geochemical parameters to elucidate the mechanisms that control natural and anthropogenic inputs of As and Hg from the Gaoping (Kaoping) River (KPR). The contents of As and Hg in surface sediments ranged from 1.84 to 20.7 mg kg^− 1 and from 0.07 to 2.15 mg kg^− 1, respectively, in the estuary and canyon. The concentrations generally decreased from the lower river toward the mixing boundary and then increased toward the estuarine mouth, followed by a slight variation in the canyon. Both As and Hg concentrations correlated strongly with clay, total organic carbon (TOC), Al, Fe and Mn contents in estuarine sediments but not necessary the same cases for canyon surface sediments. The factor analysis of surface sediments shows that the first two factors, which account for 75.6% of the variance, may represent major roles of carriers (clay, Al and Fe–Mn oxides) and TOC in controlling As and Hg distributions, respectively. Accordingly, the spatial patterns of the enrichments of As (1.9–16.2) and Hg (1.8–30.8) with reference to the crust levels follow the individual element's distribution patterns, likely because of deposition variability following inputs from the river. The contents of mobile As and Hg correlated substantially with the contents of both metals that were extracted with 0.1 M HCl. In addition to the major pool in the residual fraction (65–87%), As was relatively abundant in Fe–Mn oxides/hydroxides, whereas Hg was abundant in the organic/sulfide fraction. The deposition and accumulation rates of As and Hg in the canyon clearly decreased as the depth of water increased. The depth distributions of both metals are likely controlled primarily by TOC and Fe–Mn oxides associated factors followed by a contribution from anthropogenic pollution. The metal pollution appears to have increased substantially around 1970, following the economic boom in Taiwan, suggesting that modern sediments in the Gaoping (Kaoping) Canyon were derived from the Gaoping (Kaoping) River (KPR).     

Public Stakeholders' Perception of ICZM and Coastal Erosion in the Mediterranean

The Mediterranean area plays a pivotal role within the definition and implementation of regional strategies for integrated coastal zone management (ICZM). Under the umbrella of the Regional Framework Operation BeachMed-e, a research project was carried out in five Mediterranean EU regions (East Macedonia and Thrace in Greece, Lazio, Liguria, and Emilia Romagna in Italy and Languedoc-Roussillon in France), in order to study the different approaches to ICZM that have been applied and also to test new approaches to these regions. The aim of this article is to present and discuss the results of the common surveys conducted in order to investigate the institutional stakeholders’ perception on ICZM in the five Mediterranean regions considered. The results are presented region by region, while comparisons are carried out among regions. Summarizing the results it can be stated that some differences and common problems affecting the coastal decision-makers of the five Mediterranean regions considered were identified. Particularly, stakeholders involved in coastal management generally perceived a lack of collaboration and a poor information exchange in all the regions, resulting sometimes in a lack of awareness on coastal erosion issues.     

Comparison of the stress distributions of liquid gas road tankers with various configurations during braking, cornering, and vertical bump maneuvers

This paper compares the stress and displacement distributions of different head-shell junction configurations in LPG road tankers during different vehicle design maneuvers, such as braking, cornering, and vertical bumps, for the first time. Various combinations of heads (e.g., spherical and toroidal) and shell cross sections (circular and elliptical) are considered. The ABAQUS finite element software is used to model and analyze the fluid-filled tankers. The results show that the most critical maneuver affecting the fluid-filled tankers is cornering and the safest maneuver is braking. Moreover, the results reveal that the outer surface of the tanker generally behaves the most critically in all maneuvers, and cylindrical tankers with smaller cross-sections behave more acceptably compared to those with larger cross-sections. Among fluid-filled vehicle tankers with identical platform areas, tankers with elliptical cross-sections behave the most acceptably.     

Torque-based optimal vehicle speed control

This paper describes an optimal vehicle speed controller that uses torque-based control concepts. The controller design was divided into two steps: first, for a given vehicle speed trajectory, the engine torque demand was determined; in the second stage, a torque controller was implemented to track this torque demand. The torque demand was determined by a primary component and a correction component. The primary component was determined by solving an off-line optimization problem, and the correction component was added to compensate for the error caused by the off-line optimization. A modelbased proportional-integral (PI) feedback torque controller was employed to realize the engine torque tracking. Simulation results generated by a benchmark simulator were given to demonstrate performance of the optimal vehicle speed controller and a conventional PI speed controller that was included for comparison.     

Dynamic analysis of seatbelt systems with anti-inertial release mechanisms

In order to prevent the uncontrolled release of seatbelt buckles due to high acceleration caused by pretensioners, anti-g buckles that have pendulum-shaped g-masses to block the releasing motion are commonly adopted in seatbelt systems. However, even with the wide applications of anti-g buckles, the underlying operational principles of anti-g buckles have yet to be investigated. This work studies conditions for the engagement of the g-mass to prevent inertial release, and conditions for maintaining a blocked state under very high acceleration. Using a multibody model of an anti-g buckle, the effects of various design parameters on the performance of the anti-g buckle have been examined. It turns out that design variables associated with the geometry of the g-mass and its contacting surface configuration play important roles. In order to account for the dynamic interaction between driver and seatbelt, a multibody model of a seatbelt system is combined with a dummy model to form a single dynamic system. Using the measured displacement of the buckle during the explosion of a pretensioner as the driving condition for simulation, dynamic analysis of the seatbelt with driver interaction has been carried out. Through comparison with measured and computed accelerations of webbing, which shows good agreement, the validity of the model has been demonstrated. The dynamic model for seatbelt and driver can be used as a design tool for the development of anti-g buckles.     

Method for analyzing epicyclic gearboxes

This paper presents a method for analyzing epicyclic gearboxes by evaluating the speeds, torques and power of the external elements in epicyclic gear mechanisms, as well as the total ratios of the gear box. The method is based on the equations that describe each epicyclic gear mechanism and rules that assign appropriate codes to the external elements. The method emphasizes how power flows are transmitted through the epicyclic gears, as well as power losses. Analysis of an epicyclic gear box is performed to illustrate the proposed method.     

Ultimate Strength of Ships and Offshore Structures

The assessment of the ultimate strength of floating struc-tures is an essential step in their design process and thus it is included as one of the checks in the...     

Behaviour of the Normal Contact Force Under Multiple Wheel/Rail Interaction

The wheel/rail contact forces are calculated in the frequency domain using a track model with multiple wheels on the rail. The effects of the wave reflections between the wheels on the contact force are studied. Different pad stiffnesses are used in the calculations to investigate the influence on the contact force. It is shown that the contact force can have up to four main peaks in the frequency region 550-1200?Hz due to the wave reflections between the wheels, so that the wavelengths of short pitch corrugation can be expected to be associated with multiple frequencies. As a conclusion, it is recommended that in a model for predicting short pitch corrugation the effects of multiple wheel/rail interactions need to be included.