The selection of fishing vessel fleet operations using a multiple criteria optimization method

The methodology adopted in the design of small fishing vessels is usually concerned only with the vessel's technical characteristics and the procedures utilized may not include consideration of the relevant fishing environment. This paper describes an approach which incorporates operational, economic and technical considerations in a compressive manner. The efficiency of using multicriteria decision making methods in design is investigated with special reference to small vessels. A model is presented which takes into account various operational and fish resource factors. This allows the inclusion of a number of potentially conflicting requirements and goals within the design process. The resulting analysis identifies the optimum fleet mix for three types of fishing vessels for use in a fishing environment of a developing country.     

EXPRESSION CLONING OF A PROTECTIVE LEISHMANIA ANTIGEN

ＥＸＰＲＥＳＳＩＯＮＣＬＯＮＩＮＧＯＦＡＰＲＯＴＥＣＴＩＶＥＬＥＩＳＨＭＡＮＩＡＡＮＴＩＧＥＮＥ．Ｍｏｕｇｎｅａｕ，Ｆ．Ａｌｔａｒｓ，Ａ．Ｅ．Ｗａｋｉｌ，ＺｈｅｎｇＳｈｉｃｈｕｎ；Ｔ．Ｃｏｐｐｏｌａ，Ｚ．Ｗａｎｇ，Ｒ．Ｗａｌｄｍａｎｎ，Ｒ．Ｍ．Ｌｏｃ...     

Long-memory characteristics of urban roadside air quality

Carbon monoxide is a major contributor to air pollution in urban cities, particularly at the roadside. Hourly, monthly and seasonal mean carbon monoxide concentration data are collected from a roadside air monitoring station in Hong Kong over 7-years. The station is a few metres from a major intersection surrounded by tall buildings. In particular, hourly patterns of concentrations on different days of the week are investigated. The data show that hourly carbon monoxide concentrations resemble the traffic pattern of the area and tend to be lower in the summer. Using a seasonal autoregressive integrated moving average models shows that the daily traffic cycle strongly influences concentrations. Further, it is found that urban roadside carbon monoxide monitoring data exhibits a long-memory process, suggesting that a model incorporating long memory and seasonality effects is needed simulate urban roadside air quality.     

Dynamic analysis of energy storage unit of the hydraulic hybrid vehicle

A new configuration of hydraulic hybrid vehicle (HHV) was presented, which mainly consists of an engine, high-pressure accumulator, lower-pressure reservoir and hydraulic transformer (HT) connected to common pressure rail (CPR), and the working principle of hydraulic hybrid vehicle has been described to extend its energy-regenerated potential. Moreover, the mathematical models of the instantaneous pressure ratio of HT and the characteristic parameters of parallel and series accumulator (i.e. effective volume, specific energy, and charge-discharge efficiency) based on lumped parameters method were built, respectively. The simulation and experimental tests of dynamic characteristics of HT and accumulator were done, the result shows that the theoretical analysis was the same as the experimental results by comparing them in the curve trend, and the series accumulator was much superior to parallel accumulator in terms of pulsation damping of hydraulic transformer, that is the simulation results reasonably and appropriately.     

Systems-on-chip approach for real-time simulation of wheel–rail contact laws

This paper presents the development of a systems-on-chip approach to speed up the simulation of wheel–rail contact laws, which can be used to reduce the requirement for high-performance computers and enable simulation in real time for the use of hardware-in-loop for experimental studies of the latest vehicle dynamic and control technologies. The wheel–rail contact laws are implemented using a field programmable gate array (FPGA) device with a design that substantially outperforms modern general-purpose PC platforms or fixed architecture digital signal processor devices in terms of processing time, configuration flexibility and cost. In order to utilise the FPGA's parallel-processing capability, the operations in the contact laws algorithms are arranged in a parallel manner and multi-contact patches are tackled simultaneously in the design. The interface between the FPGA device and the host PC is achieved by using a high-throughput and low-latency Ethernet link. The development is based on FASTSIM algorithms, although the design can be adapted and expanded for even more computationally demanding tasks.     

Adoption of Internet Services in Liner Shipping: An Empirical Study of Shippers in Taiwan

Abstract

The Internet service attributes desired by shippers were examined as well as a model that seeks to explain the intention of shippers to use Internet services in liner shipping. Using data collected from a survey of a group of shippers in Taiwan, the relationships among the constructs in the model were tested, namely: perceived usefulness, perceived ease of use, security and use intention. The results suggest that shippers perceive tracing to be the most important service attribute of Internet services, followed by checking for customs clearance, vessel schedules and electronic document services. The findings indicate that perceived ease of use is the major factor affecting the intention of shippers to use Internet services, and that perceived ease of use has a strong positive effect on perceived usefulness. The results also indicate that security has a positive effect on a shipper’s perception of ease of use. However, the influence of security on use intention and perceived usefulness was not supported in this study. The theoretical and practical implications of the findings on the intention of shippers to use Internet services in liner shipping are discussed.     

Optimizing shipping company operations using business process modelling

In order to identify the elements constituting quality in services, a business process modelling methodology has been applied in the case of a Greek liner shipping company. The company operations have been identified and analysed in order to assess the complete performance of service elements and thereafter identify how to match the service performance against the user requirements. A liner container service within Europe has to compete with the road transport which, in many cases, is an alternative to the sea transportation and not complementary to it. Thus, not only the ship has to be envisaged when aiming to improve quality in services but also the whole chain, namely port authorities, land transportation enterprises, subcontractors, agents, charterers and others. A set of potential improvements within this framework are thus suggested and time and cost (examined in a specific voyage scenario) are measured before and after the implementation of these measures. Very large time and cost savings are observed after the application of the technology improvements, allowing, in fact, the shipping company to even increase the number of round trips per year in the examined route. This indicates that very large benefits can be drawn by analysing and critically adjusting business processes in modern shipping companies.     

Error quantification of a high resolution coupled hydrodynamic-ecosystem coastal-ocean model: Part3, validation with Continuous Plankton Recorder data

Data collected during the Continuous Plankton Recorder (CPR) survey has been used to validate a three-dimensional hydrodynamic ecosystem model simulation of the North-west European Shelf for the years 1988–89. The CPR time series is unique to the North Atlantic region as a validation tool. Data were extracted from the model to correspond with those collected by the CPR survey, and both the model and survey plankton data were standardised to allow the comparison of model biomass with survey counts. Simple linear regression and absolute error maps provide a qualitative evaluation of spatio-temporal model performance of simulated diatoms, flagellates, total phytoplankton and omnivorous mesozooplankton. Comparisons of z-scores indicate that the model reproduces the main pelagic seasonal features, and there is good correlation between magnitudes of these features with respect to standard deviations from a long-term mean. The model is replicating up to 62% of the mesozooplankton seasonality across the domain, with variable results for the phytoplankton. There are, however, differences in the timing of patterns in plankton seasonality. The validation exercise has highlighted that the spring diatom bloom in the model is too early, suggesting the need to reparameterise the response of phytoplankton to changing light levels in the model. Errors in the north and west of the domain imply that model turbulence and vertical density structure need to be improved to more accurately capture plankton dynamics.     

Marine Protected Area Management Effectiveness: Progress and Lessons in the Philippines

Quantifying progress in management of marine protected areas (MPAs) is crucial to marine conservation and fisheries management in the Philippines. This study compiles data on the status, occurrence, and management gaps of MPAs through coordination with multiple organizations supporting and guiding MPAs in the Philippines. MPA management effectiveness was measured using a MPA Rating System. Since 2002 the modal MPA rating levels increased from level 1 (initiated) to level 4 (sustained) in 2008/9. This upward trend is attributed to factors that promoted both the establishment and improved management of MPAs. Analysis indicated that: (1) most MPAs struggle with budgetary constraints or lack of sustainable financing and (2) overall the MPAs are being maintained and progressing with notable improvement in management despite a range of difficulties encountered during the implementation process. For MPAs in the Visayan Region for which biophysical data were available, the MPA Rating System was used to assess the effectiveness of local government capacity building on MPA coral reef health. Our results suggest that MPAs with higher ratings are likely to have better reef health conditions.     

Wall-wetting model based method for air-fuel ratio transient control in gasoline engines with dual injection system

Modern gasoline engines with dual injection system improve combustion efficiency by using the two injection commands simultaneously. Due to the different dynamics in the two injection paths, the transient air-fuel ratio (A/F) performance when the injection authority is changed remarkably affects the emission performance of the engine system. For this kind of engines, this paper proposes a model-based design approach that gives a dynamic feedforward compensation for achieving good transient A/F performance. Actually, this work centers on discussing the mean-value model parameters for characterizing the wall-wetting phenomenon when the port injection authority is changed under different engine operation conditions. Moreover, from the view of practice, taking into account the event-based physics of the engine system, significant calibration for the model parameters that are employed for achieving the feedforward compensation is investigated experimentally. Finally, experimental validation results demonstrate the improvement of the transient A/F performance by using the control scheme.